Tuner Challenge Version 5.

Lucas · Jun 24, 2009

Middleweight entry

AMMT Corvette ZR-1 Limited Edition (C1) '10

Power: 368HP/4200rpm
Torque: 670.03NM/2400rpm
Weight: 1112kg
Motegi East Laptime: 1'21.594

Parts list:

- Racing Exhaust
- Racing Chip
- NA Tuning Stage 3
- Engine Balancing
- Post Polishing
- Weight Reduction Stage 3
- Racing Brakes
- Brake Ballance Controller
- FC Suspension
- FC Transmission
- Triple-plate Clutch
- Racing Flywheel
- Carbon Driveshaft
- FC LSD
- S3 Tires
- Oil Change
- New wheels (PD0201)

Settings:

Suspension:

Spring rate: 7.5/ 6.5
Ride Height: 125 / 125
Bound: 3 / 7
Rebound: 6 / 8
Camber: 2.5 / 1.5
Toe: -1 / 0
Stabilizers: 2 / 3

Transmission:

1st: 2.096
2nd: 1.403
3rd: 1.050
4th: 0.830
5th: 0.680
6th: -----
7th: -----
Final: 3.900
Auto: 14

Brake Ballance Controller:

Brakes: 3 / 5

Limited Slip Differential:

Initial: 15
Acceleration: 35
Deceleration: 20

Downforce:

Amount: 0 / 0

Driving Aids:

ASM Oversteer: 0
ASM Understeer: 0
TCS: 0

Production notes: Tuned with the Motegi track in mind, this car handles like a bird, moving swiftly through corners, packed with the power of Austra-Manx Motorsport Tuning. The Limited Edition ZR-1, the ultimate C1 Corvette ever to hit the streets with 368HP and 670.03NM of torque. Batteries not included.

Kingofweasles · Jun 25, 2009

I hope you don't mind if i crib you're style of presentation Leonidae!
====================
***LIGHTWEIGHT ENTRY***

Opel Speedster Turbo '00

Facts And Figures:
Power: 283 BHP
Weight: 884 Kgs
WPR: 3.121
Motegi East Lap time: 1'27.227
Opera S2000 Lap Time: 1'29.352

Parts to buy:
-Semi-Racing Exaust
-Racing Brakes, Brake Ballance Controller
-Engine Balancing, Port & Polish, Stage 1 Turbo Kit, Sports Intercooler & RC Chip
-Triple-Plate clutch, Racing Flywheel
-FC Transmission
-FC Suspension
-FC LSD
-S3 Tires
-Stage 3 Weight reduction
-Oil Change
-GT Wing (Straight BB)
-New Rims (ENKEI 020's, Optional)

Settings:

Brake Balance Controller
Brakes: 6 / 6

Suspension Settings:

Spring Rate: 5.8 / 5.0
Ride Height: 95 / 105
Bound: 5 / 6
Re-Bound: 6 / 6
Camber: 1.5 / 1.0
Toe Angle: 0 / 0
Stabilizers: 3 / 3

Transmission Settings

Note: Adjust the Auto setting first, then the Final Drive, THEN the individual Gear Ratios.

Gear Ratios:

1st: 2.891
2nd: 1.927
3rd: 1.350
4th: 1.075
5th: 0.880
Final Gear: 4.000

Auto set: 8

LSD
Initial: 10
Acceleration: 35
Decceleration: 5

Downforce
Amount: 27 / 30

Driving aids: NONE!!!

Initially built for the rough-and-tumble Opel Speedster Cup one-make series, this car originally was equipped with R3's and was packing over 315BHP. Obviously not going to be legal for TCV5 with that kind of set-up, it was de-tuned and made to work with S3 tires. It's a fairly responsive for a turbocharged car, though it lacks crispness at low revs (As most turbocharged cars do). Even with that small handicap, the car set a time that was only 1.2 seconds off of the best "Fully-Tuned" Lap...

DISCLAIMER: This is a relatively new tune, so it may have some "Bugs" in it...Please PM me to provide feedback and to help me and the boys at Bellomo Motorsports SPA make it better!
====================

mazdaman · Jun 26, 2009

CamryFan · Jun 26, 2009

Heavyweight Entry

Jaguar XK-R Sport

441 BHP@6100rpm 625.8Nm/3500rpm 1526kg

Make: Jaguar
Model: XKR-R Performance
Year: 02
From: UK - Jaguar- New Cars

Parts To Buy.
Semi-Racing Exhaust
Racing Brakes
Stage 1 Engine
Computer Chip
FC Gearbox
RC Suspension
Twin-Plate Clutch
S3 Tyres
Stage 1 Weight Reduction.

Transmission
Default - Final - Auto
1st 2.750
2nd 2.000
3rd 1.465
4th 1.090
5th 0.852
6th 0.699

Final 3.525
Auto 15

Suspension
Spring Rate 7.9/8.2
Ride Hight 116/116
Damper
Bound 5/6
Rebound 6/7
Camber 2/1
Toe 0/0
Stabilizer 5/5

Yes it's back alright. We have four of these Jaguar bad boys at N-Tune HQ but we always end up coming back to this one. It's the Endurance Spec Jaguar from October last year but as anything it has matured and grown to what it is now. This isn't a Motegi Special, it has ditched the S1 tyres for some grippy S3 and the suspension has been slightly revised to allow for the extra grip. Another bonus is the 200mph+ gearbox from Black Project meaning it may not be the best for Motegi but you can take it anywhere else.

mazdaman · Jun 26, 2009

middle weight entry

year:2001
car:mazda rx8 cameilia red
power:3??/8500rpm
torque:312.32/7500 rpm
9.47 miles

tires: s2

parts to buy

tubo kit 2
racing brakes
racing suspension
fc transmission
race clutch
lightweight flywheel
fc lsd

abs

front:15
rear:14

suspension
spring rate:front 12.0 rear 12.0
ride height 106 both front and rean
shock rebound and bound front and rear:8
camber angle front:2.0 rear:1.0
stabilizers front:4 rear:4

mazda raceway laguna sega record 1:44:703

Rotary Junkie · Jun 27, 2009

--------- HEAVYWEIGHT ENTRY --------
465hp
1402kg
3.01 WPR

Parts List
Racing Exhaust
Racing Chip
Stage 1 NA Tuning
Port Polishing
Engine Balancing
Racing Brakes
Brake Balance Controller
Triple-plate Clutch
Racing Flywheel
Carbon Driveshaft
Stage 2 Weight Reduction
S3 Tires
FC Suspension
FC Transmission
FC LSD

The Setup

SUSPENSION:
--------------------------------------------------------------
Spring Rate:--------7.0/7.5
Ride Height:-------120/120
Shock Bound:-------3/3
Shock Rebound:-----5/5
Camber:------------2.7/1.4
Toe:---------------0/0
Stabilizers:-------5/2
-----------------------------------------------------------------
Transmission:
-----------------------------------------------------------------
Reset to default. Autoset to 17, then set ratios and final.
Ratios of: [2.320/1.690/1.290/1.000/.780/0.650]
Final of 4.100.

LSD/Downforce and others:
-------------------------------------------------------------------
LSD: 8/30/10

Brake Balance: 5/7

Ballast Weight: 0kg

Ballast Balance: 0 (neutral)

Downforce: None

Aids: None at all
--------------------------------------------------------------------

This car is a bit of an oddity; it doesn't seem to do that well around corners and makes no effort to hide the fact that it is a massive vehicle that weighs more than a fair bit.

Thing is, it's not massively fast down straights either due in no small part to the aerodynamics of this car... Yet it clocks times right with modern vehicles.

The reason? Simple, while it doesn't seem to do anything well at first glance, it is in fact going around those corners reasonably. And while the top speed on a given straight isn't very high for the power to weight ratio, the go between 40 and 100mph is hard to parallel.

Update, but do not forget.

Rotary Junkie · Jun 27, 2009

------- MIDDLEWEIGHT ENTRY -------
372hp
1079kg
2.900 WPR

Parts List
Semi-Racing Exhaust
Racing Chip
Stage 1 Turbo Kit
Racing Brakes
Brake Balance Controller
Triple-plate Clutch
Racing Flywheel
Carbon Driveshaft
Stage 3 Weight Reduction
S3 Tires
FC Suspension
FC Transmission
Rear Wing
Oil Change

The Setup

SUSPENSION:
--------------------------------------------------------------
Spring Rate:--------9.0/5.2
Ride Height:-------135/135
Shock Bound:-------6/6
Shock Rebound:-----4/9
Camber:------------2.0/1.9
Toe:---------------(-2)/0
Stabilizers:-------7/2
-----------------------------------------------------------------
Transmission:
-----------------------------------------------------------------
Reset to default. Autoset to 1, then set ratios and final.
Ratios of: [3.650/2.920/2.336/1.855/1.495/1.190]
Final of 2.500.

LSD/Downforce and others:
-------------------------------------------------------------------
LSD: Default because is OEM Torsen unit

Brake Balance: 8/4

Ballast Weight: 0kg

Ballast Balance: 0 (neutral)

Downforce: 30/30

Aids: None at all
--------------------------------------------------------------------

At first glance this FD looks like a stock JDM S8 car with a massive GT-style wing hanging off the back and a set of BBS wheels... Until one notices it's very loud and is destroying corners as well as straights in a manner unattainable to any factory stock FD RX-7.

The actual ride height of the car is identical to a factory stock Spirit R, but that's where the similarities end. It's notably stiffer, there's a fairly aggressive (but not unfriendly to the street) alignment specification going on...

Not only is it leaps and bounds better than stock, it is leaps and bounds better than the run of the mill tuned FD as well; and now it's here to take down a certain NSX.

Skygrasper550 · Jun 27, 2009

time to post the rest of my entries..,

TCv5 Lightweight Entry

Spoon Civic Type R (EK9)

Parts List:

NA Stage 2
Racing Brakes
Brake Balance Controller
FC Transmission
TR Clutch
RC Flywheel
FC LSD
RC Suspension
Oil Change

Parts Settings:

Suspension

Spring Rate : 10.0 / 8.0
Ride Height : 90 / 108
Shock Bound : 3 / 2
Shock Rebound : 4 / 3
Camber : 2.4 / 0.8
Toe : 0 / 0
Stabilizer : 1 / 2

Transmission:

Auto - 2
Final - 2.790
1st - 5.096
2nd - 3.658
3rd - 2.786
4th - 2.243
5th - 1.885
6th - 1.629

LSD

Initial - 15
Accel - 45
Decel - 5

Brake Balance Controller - 2 / 5

Ballast Weight - 145
F/R Balance - 0

Driving Aids - All 0

My never-dying Spoon Civic, lol :lol:

cheers..,

TCv5 Middleweight Entry

Proto Motors Spirra V8

Parts List:

RC Exhaust
Racing Brakes
Brake Balance Controller
NA Stage 1
Port Polish
FC Transmission
TR Clutch
RC Flywheel
FC LSD
RC Suspension
S3 Tires
Weight Reduction Stage 2
Rigidity Increase
Rear Wing

Parts Settings:

Suspension

Spring Rate : 8.4 / 9.1
Ride Height : 130 / 125
Shock Bound : 3 / 2
Shock Rebound : 5 / 4
Camber : 2.3 / 0.8
Toe : 0 / 0
Stabilizer : 1 / 2

Transmission

Auto - 12
Final - 3.440
1st - 2.908
2nd - 1.977
3rd - 1.454
4th - 1.143
5th - 0.942
6th - 0.789

LSD

Initial: 15
Accel: 45
Decel: 10

Brake Balance Controller - 4 / 3

Downforce - 15 / 18

Ballast Weight - 85
F/R Balance - -50

Driving Aids - All 0

This car has undergone a very huge transformation that it feels like you're driving a race car. Could use a little more power though, but rules are rules..,

TCv5 Supercar Entry

Jaguar XKR Coupe

Parts List:

RC Exhaust
Racing Brakes
NA Stage 2
CR Tranny
TR Clutch
RC Flywheel
Carbon Driveshaft
FC LSD
RC Suspension
S3 Tires

Parts Settings:

Suspension

Spring Rate : 9.4 / 8.9
Ride Height : 119 / 119
Shock Bound : 4 / 3
Shock Rebound : 5 / 5
Camber : 2.3 / 1.1
Toe : 0 / 0
Stabilizer : 2 / 2

LSD

Initial: 15
Accel: 30
Decel: 5

Driving Aids - All 0

Braking is a bit weak for this car, hence the luxury items that pack a lot of weight. Brake early, and you should do fine on corners.., 👍

Kingofweasles · Jun 28, 2009

*** Middleweight Entry ***

Clio Renault Sport V6 24V '00

Facts And Figures:
Power: 368 BHP
Weight: 1134 Kgs
WPR: 3.080
Motegi East Lap Time: 1'23.474
Mine's Lancer Evo VI Lap Time: 1'27.994

Parts to Buy:
-Semi-Racing Exhaust
-Racing Brakes, Brake Balance Controller
-Engine Balancing, Port & Polish, Stage 2 NA Tuning & RC Chip
-Triple-Plate Clutch, Racing Flywheel
-FC Transmission
-FC Suspension
-FC LSD
-S3 Tires
-Stage 3 Weight Reduction
-Rigidity Refresher Program
-Oil Change
-GT Wing (Straight Type BS or BB)
-New Rims (BBS 010's, Optional)

Settings:

Brake Balance Controller
Brakes: 4 / 3

Suspension Settings:

Sring Rate: 7.0 / 8.0
Ride Height: 110 / 108
Shock Bound: 7 / 6
Shock Re-Bound: 7 / 7
Camber Angle: 2.0 / 1.5
Toe Angle: 0 / 0
Stabilizers: 6 / 5

Transmission Settings:

NOTE: Adjust the Auto Setting first, then the Final Drive, THEN the individual Gear Ratios

Gear Ratios:

1st: 2.793
2nd: 1.692
3rd: 1.374
4th: 1.039
5th: 0.832
6th: 0.699
Final Gear: 4.375

Auto: 15

LSD

Initial: 8
Acceleration: 20
Deceleration: 20

Downforce
Amount: 21 / 23

Driving Aids: NADA!!!

Initially built to be a modern-day succesor to the Renault 5 Turbo of the 80's , THIS Clio Renault Sport V6 24V ultimately mutated into a car MUCH faster than the "Official" Renault Clio Cup race cars. It's mainly set-up for tight, twisty tracks like Tsukuba and Motegi East at the moment, though our lead tester was able to win the El Capitan Clio Cup race with ease without any changes to the current set-up...Amazing considering that it's running on S3's, no?
====================

Kingofweasles · Jun 28, 2009

*** Heavyweight Entry ***

Subaru Impreza WRX STI spec C

Facts And Figures:
Power: 456 BHP
Weight: 1301 Kgs
WPR: 2.854
Motegi East Lap Time: 1'23.365
BATTLE MONTSER Lap Time: 1'27.326

Parts to Buy:
-Racing Exhaust
-Racing Brakes, Brake Balance Controller
-Racing Intercooler, Stage 2 Turbine Kit and RC Chip
-Triple-Plate Clutch, Racing Flywheel
-FC Transmission
-FC Suspension
-FC LSD
-Stage 1 Weight Reduction
-Oil Change
-S3 Tires
-GT Wing (Straight Type BB)
-New Rims (Optional)

Settings:

Brake Balance Controller:
Brakes: 8 / 8

Suspension Settings:

Spring Rate: 6.2 / 5.4
Ride Height: 120 / 125
Shock Bound: 7 / 5
Shock Re-Bound: 7 / 6
Camber Angle: 2.4 / 0.7
Toe Angle: 0 / -1
Stabilizers: 5 / 6

Transmission Settings:

NOTE: First set the Auto setting, then the Final Drive Gear, THEN the Individual Gear Ratios.

Gear Ratios:

1st: 3.393
2nd: 2.320
3rd: 1.690
4th: 1.295
5th: 1.043
6th: 0.880
Final Gear: 3.925

Auto Set: 13

LSD

Initial: 5 / 8
Acceleration: 15 / 20
Deceleration: 10 / 15

Downforce
Amount: 22 / 25

Weight Balance:
Ballast Weight: 55
Front/Rear Balance: 0 (Neutral)

Driving Aids: JUST SAY NO!

This car i quite near and dear to us, especially to our Co-Owner/Lead Crew Chief/Secondary Tester MIKEY BE: It's the very first car that Bellomo Motorsports SPA ever attempted to tune to our liking. Brought out of moth-balls and tuned for TCv5's rules, this car may feel a little raw around it's edges to some, but to us it's a reminder of where we started and where we're going, as it's set-up was re-worked to make it quicker than ever...Even with 55Kgs of ballast weight added!
====================

Kingofweasles · Jun 28, 2009

***SUPERCAR ENTRY***

Jaguar XJ220 ‘92

Facts And Figures:
Power: 550 BHP
Weight: 1532 Kgs
WPR: 2.785
Motegi East Lap time: 1'22.798
GranTurismo Skyline Lap Time: 1'28.352

Parts to buy:
-Brake Balance Controller
-FC Transmission
-FC Suspension
-FC LSD
-S3 Tires
-Oil Change
-GT Wing (3D Type BB, BS or BW)
-New Rims (ALO204's, can be found in the “Today’s Special” section in the GT Wheel shop, Optional)

Settings:

Brake Balance Controller:
Brakes: 4 / 3

Suspension Settings:

Spring Rate: 11.0 / 12.5
Ride Height: 70 / 75
Bound: 6 / 7
Re-Bound: 7 / 7
Camber: 2.5 / 0.9
Toe Angle: 0 / -1
Stabilizers: 4 / 4

Transmission Settings

Note: Adjust the Auto setting first, then the Final Drive, THEN the individual Gear Ratios.

Gear Ratios:

1st: 4.303
2nd: 2.803
3rd: 1.990
4th: 1.496
5th: 1.191
Final Gear: 2.858

Auto set: 10

LSD
Initial: 14
Acceleration: 32
Decceleration: 16

Downforce
Amount: 40 / 55

Weight Balance
Ballast Weight: 160 ( :scared:

)
Front/Rear Balance: 0 (Neutral)

Driving aids: None Whatsover!

Bellomo Motorsports SPA's last entry for TCv5 is easily one of the more..."Eccentric" cars lounging around in the back of our garages. Built to win the Supercar Open series as well as to be a competent Track-Day car, our XJ220 was fitted with as many racing-spec parts as we could find: Racing Transmission, Racing Suspension, A fully customizable Limited-Slip Differential...Even a racing Wing and a set of Wheels "Borrowed" from an Ex-DTM Alfa Romeo 155!

However, don't let the asthetics of this Big Cat fool you: Though honing it to meet the demands of TCv5 has proven to be quite the challenge (As was trying our hardest to craft a set-up that got around that 160 Kgs of ballast weight!), it's the fastest out of all of our TCv5 cars, even though it's MUCH more suited to an open circut like Mid-Field Raceway or Grand Valley Speedway.

VTiRoj · Jun 28, 2009

~ HEAVYWEIGHT ENTRY ~
Horsepower: 457bhp
Weight: 1303kg
Power to weight ratio: 2.850

BMW M3 ’04

Parts List
Racing brakes kit
Brake controller
Stage 3 NA tuning
Port Polish
Engine Balancing
Transmission / Fully customisable
Triple clutch
Racing Flywheel
Variable LSD
Fully customisable suspension
Sports / Soft tyres (S3)
Weight reduction: Stage 3
Increase Rigidity
Wing
Wheels

The Setup

SUSPENSION:
--------------------------------------------------------------
Spring Rate:-------9.0/6.9
Ride Height:-------79/79
Shock Bound:-------6/6
Shock Rebound:-----8/8
Camber:------------1.5/1.8
Toe:---------------0/0
Stabilizers:-------4/5
-----------------------------------------------------------------
Transmission:
-----------------------------------------------------------------
Autoset to 15. Then set ratios and final.
Ratios of: [3.307/2.238/1.638/1.305/1.102/0.959]
Final of 4.000.

LSD/Downforce and others:
-------------------------------------------------------------------
LSD: 13/25/10

Brake Balance: 5/6

Ballast Weight: 0kg

Ballast Balance: 0 (neutral)

Downforce: 30/30

Aids: None at all
--------------------------------------------------------------------
Notes:
Where the CSL is a lightweight with a subtle amount of power, this regular M3 took the high weight and high power approach. Just like its lightweight relative, this M3 went through numerous suspension, gearbox and LSD changes. The ending result is a ride that makes you wonder if this M3 really does weigh 1303kg. Power was increased, coupled with a gearbox set towards acceleration. The end result is a heavyweight car that goes like a middleweight. The wing may make the M3 look like a typical boy racer Beemer, but I assure you, you wont see a boy racer pull laptimes like this M3 can.

mafia_boy · Jun 29, 2009

TCv5 Heavyweight Entry
HSV VY Super-Clubby Prototype
(Based on Holden Commodore SS)

Power: 340Kw (463hp)
Torque: 750Nm+
Weight: 1362kg

PARTS TO BUY
Racing Brakes (No BBC fitted)
Supercharger
Fully Customisable Gearbox
Triple Clutch
Racing Flywheel
Fully Customisable LSD
Carbon Driveshaft
Fully Customisable Suspension
Stage 3 Weight Reduction
S3 Tyres
3D D Wing

SETTINGS
Suspension
Spring Rate: 8.0/7.2
Ride Height: 100/100
Damper Bound: 3/2
Damper Rebound: 9/6
Camber: 2.7/0.0
Toe Angle: 2/-2
Stabilisers: 3/4

Gearbox
First set final ratio to 5.500, Autoset 1 then ratios as follows:
1st: 2.500
2nd: 1.825
3rd: 1.400
4th: 1.100
5th: 0.900
6th: 0.750
Final: 3.460

LSD
Initial: 14
Acceleration: 18
Deceleration: 16

Downforce: 30/30

GME has decided to re-fry an original classic from our garage for TCv5 and put the chilli and cayenne pepper in there for extra spice this time. Dubbed the 'Super-Clubby Prototype', this is the R8 WP's grandfather and we turned this Aussie classic into a frankenstein to make sure it would stay under the power limit, it's really detuned compared to its full pack. :mischievous:

Starting off with our well known Clubsport suspension package, this gives the car an already improved feeling upon the stock SS's characteristics and has been proven in previous reviews as being a forgiving but rewarding package. Then we added HRT's V8 Supercar wing pack and turned the downforce up to the maximum for ultra handling performance. For extra straight line speed and the most grunt through the gears, I've added a supercharger and taken EVERYTHING else off. No oil, no exhaust, no chip, NOTHING but one big blower pumping oodles of boost into the LS1 motor. Power jumps up 95Kw on stock and over 250Nm of extra torque to make this a well balanced but powerful beast, capable of despatching supercars with ease and frying tyres when the need for fun arises.

The Super-Clubby, blown Aussie grunt at it's finest from GME. :cool:

PF · Jun 29, 2009

Lightweight entry for TCv5

Lotus Elise Type 72 2001
Mass: 801kg
Power: 284hp
Best lap: 1:26.674

Parts List:

Car (see above)
Semi-racing exhaust
Racing chip
Engine balance
Port Polish
Oil change
S3 Tyres
Stage 3 Turbo
Racing brakes and controller
Racing suspension
Full transmission
Racing Flywheel
Triple clutch
Wing
Full LSD
Rollcage

Settings:

Suspension (front/rear):
Springs (9.2/9.6)
Ride (97/97)
Bound (2/6)
Rebound (5/7)
Camber (2.0/1.0)
Toe (0/-2)
Stabilisers (5/5)

Brakes: 3/5

Transmission (please do it in this order):
Gears->Default
Auto->25
Final->5.5
Auto->1
Final->3.824
1st: 2.925
2nd: 1.866
3rd: 1.387
4th: 1.081
5th: 0.894

Downforce: 20/30
LSD: 10/23/11
Ballast: 45kg@position 40 (rear)

Notes: This is, without doubt, the most enjoyable thing Ive ever accomplished in this game. Its not a beginners car, and in fact I had to give it to a better driver during the final stages of testing. My driver Dr James also made some slight adjustments to the gears, LSD and possibly other stuff, so he should get a (significant) part of the credit for this. He also got the laptime of 1:26.6xx.

This car approaches different corners in different ways. For a hairpin, brake hard and early, line it up, then smash the accelerator to get awesome exit speed. For the sweepers you can just glance at the car and it will turn. For the esses I just coast and turn, but realise that these make up much of the lap time, so do them properly. My driver prefers to tap the brakes just before (and/or halfway through) the esses, so perhaps you should make your own judgement.

This is my first foray into the tuning circle and Ive meticulously tested every part, so if you see a mistake Id be very grateful if you could post or PM me with the problem.

CamryFan · Jun 30, 2009

Battle Motegi - Lotus Elise

Lightweight Entry

271BHP@ 5600RPM 332.6NM@4500RPM 809KG

Make: Lotus
Model: Elise (standard, no 111 number's)
Year: 00
From: UK - Lotus - New Cars

Upgrades
(NO OIL CHANGE)
Semi-Racing Exhaust
Racing Brakes
Port Polish
ECU Upgrade (chip)
FC Gearbox
Triple Clutch
Racing Flywheel
Stage 3 Turbo
Racing Suspension
S3 Tyre's

Settings.
Suspension
Spring Rate 7.6/10
Ride Height 112/118
Damper Bound 4/5
Damper Rebound 6/7
Camber 2.0/1
Toe 1/2
Stabiliser 3/4

Transmission
Auto Set -> Leave the Final -> Do the gears
Autoset 4
Final 4.200
1st - 2.723
2nd - 1.891
3rd - 1.400
4th - 1.094
5th - 0.829

Driving Aids
None

Ballast (very important)
Weight 95
Balance -25

One day at N-Tune we decided that we would NOT buy any more car as we had enough projects as it was. As a result we took the dust cover off to a brand new Elise. Our policy on buying new cars has gone back to the way it always was (if we like it, we will buy it) but this Elise still remains. It was commissioned to be the best handling Elise without a wing and while I doubt it is the best handling Elise I believe it is head and shoulders above the standard car.

At the last second we pulled out the 200hp project motor and replaced it with the force fed 1ZZ-FE out of our MRS and placed it in the Elise, the transmission came with it. We took it to Motegi and it did the deed.

We would have been kicking ourselves if we hadn't entered this car.

CamryFan · Jun 30, 2009

Project Motegi - Ford Falcon F427 GT

Supercar Entry

565BHP@5800RPM 836.33NM@4500RPM 1825KG

Make: FPV
Model: GT
Year: 04
From: Australia - FPV - New Cars

Upgrades
Semi-Race Exhaust
Supercharger
Racing Brakes
Brake Balance Controller
FC Race Suspension
FC Gearbox
Triple Plate Clutch
Racing Flywheel
Carbon Driveshaft

Setup
Suspension
Spring Rate 7.5/8.6
Ride Height 116/118
Damper Bound 5/6
Damper Rebound 6/7
Camber 2/1
Toe 0/0
Stabilizers 5/5

FC Gearbox
Final -> Auto -> Gears
1st - 2.732
2nd - 1.921
3rd - 1.441
4th - 1.209
5th - 0.962
6tth 0.834
Final - 3.550
Auto - 8

Do you really think that Ford would just sit around while HSV ran around the block screaming "Everybody look, its Australia's first Supercar". No HSV, no it isn't. FPV beat you to the punch, but they couldn't be stuffed making it.

Enter Project Motegi, the engine remains intact from the original F427 but the suspension and the transmission have both received major overhauls to suit Motegi. FPV Pursuit, thats not even half of it. This is the way Aussie Supercars should be built.

PF · Jun 30, 2009

TCv5 Middleweight entry

Mazda RX-7 Type R Bathurst R (FD 1997) by PF and CamryFan Engineering
*Project Motegi*

Engine setup for 10km special:
Oil Change
Racing exhaust
Computer chip
Stage I turbo
Gives 375hp

Engine setup for used car:
Oil change
Racing Exhaust
Computer Chip
Stage 1 Turbo Upgrade
Racing Intercooler
Gives 374hp

Other Parts:
Racing Brakes and controller
Original Suspension
Full Customisable Transmission
Triple Clutch
Racing Flywheel
Carbon Driveshaft
Full LSD

Chassis refresh (if required)
Weight Reduction stage 3 (1071 kg)
S3 tyres

Setup:

Suspension
Spring rate 7.2/6.7
Ride height 84/89
Dampers 2/6
Camber 2.0/1.5
Toe 0/-1
Stabiliser 3/5

Brakes: 3/6
LSD:8/18/5

Transmission (Default -> Autoset -> Gears)
1st - 3.269
2nd - 2.185
3rd - 1.680
4th - 1.331
5th - 1.087
6th - 0.875
Final 4.100
Auto 8

*Marketing Blurb*

Carrying the Bathurst moniker you can tell that this thing came from
downunder. PF and CamryFan have joined togther to create RX-7 Type R
Motegi. The suspension has been vastly modified and now rides lower and
harder then a standard RX-7. Power is around 370 horses but weight is
down nearly 300 kg. The final piece is the N-Tune derived 6 speed manual
gearbox, N-Tune happen to test on Motegi you know *sinister smile*

mafia_boy · Jun 30, 2009

TCv5 Supercar Entry
FPV F6 Typhoon R Spec

Power: 459Kw (624hp)
Torque: 861.52Nm
Weight: 1776Kg
WPR: 2.845
0-100km/h: 4.76sec
0-160km/h: 8.56sec
1/4 Mile: 12.326@202km/h
Top Speed: 301.18km/h

PARTS TO BUY
Racing Exhaust
Racing Brakes (No BBC fitted)
Racing Chip
Port & Polish
Engine Balancing
Racing Intercooler
Stage 2 Turbocharger
Oil Change
Fully Customisable Gearbox
Triple Clutch
Racing Flywheel
Fully Customisable LSD
Carbon Driveshaft
Fully Customisable Suspension
S3 Tyres
3D A Wing

SETTINGS
Suspension
Spring Rate: 8.0/7.2
Ride Height: 100/100
Damper Bound: 4/3
Damper Rebound: 8/7
Camber: 2.7/0.7
Toe Angle: 3/-3
Stabilisers: 4/5

Gearbox
First set final ratio to 5.500, Autoset 3, then ratios as follows:
1st: 2.600
2nd: 1.800
3rd: 1.375
4th: 1.100
5th: 0.910
6th: 0.775
Final: 3.450

LSD
Initial: 12
Acceleration: 14
Deceleration: 13

Downforce: 30/30

The storm is brewing, the clouds get dark, it can only mean one thing....the Class 5 Typhoon is coming down the pit straight at Motegi. A proven runner around multiple circuits with it's GME settings, for TCv5 I've chucked in a wing to give the car the maximum bite and speed around the corners without sacrificing much of it's already playful nature. Remember, you are dealing with 624hp of hardcore turbocharged Aussie six here so the tyres can be torn into shreds if you don't treat it with respect but it will go where you want and when you want it to.

Enjoy responsibly and review favourably.

Rotary Junkie · Jun 30, 2009

------ SUPERCAR ENTRY ------
511hp (518ps)
1444kg
2.787 WPR using PS figure shown in garage list, settings screen and etc.

Note: 2002 Impreza Sedan WRX STi is the basis, NOT the Spec-C!

Parts List
Semi-Racing Exhaust
Racing Chip
Original Turbo (Stage 5)
Port Polishing
Engine Balancing
Racing Intercooler
Racing Brakes
Brake Balance Controller
Triple-plate Clutch
Racing Flywheel
Carbon Driveshaft
S3 Tires
FC Suspension
FC Transmission
FC LSD
Wing
*Note, no VCD is needed, the stock VCD is adjustable*

The Setup

SUSPENSION:
--------------------------------------------------------------
Spring Rate:--------13.0/5.2
Ride Height:-------140/130
Shock Bound:-------2/6
Shock Rebound:-----6/9
Camber:------------1.9/1.9
Toe:---------------0/0
Stabilizers:-------6/1
-----------------------------------------------------------------
Transmission:
-----------------------------------------------------------------
Reset to default. Autoset to 17, then set ratios and final.
Ratios of: [4.129/3.052/2.364/1.930/1.612/1.281]
Final of 2.500.

LSD/Downforce and others:
-------------------------------------------------------------------
LSD: Front: 7/20/10; Rear: 12/58/5

Brake Balance: 6/8

VCD: 35

Ballast Weight: 4kg

Ballast Balance: 0 (neutral)

Downforce: 30/30

Aids: None at all
--------------------------------------------------------------------

511hp (518PS), AWD, 6 gears, a bunch of downforce, and a tendency to crack the rear loose when properly provoked.

Of course, it is AWD so some understeer will show its ugly head if you try to drive it like a RWD... Point it, squeeze the throttle, and it'll do the shooting with acceleration so insane you'd swear it was behind Columbine with unflappable traction (unless you're in 1st. Or 2nd and already kinda sideways, at which point it will nuke some tires for you).

Tandem · Jun 30, 2009

TCV5 Middleweight Entry
DMC Delorean S2 '04

The Delorean, going back to the future.

Parts to equip:

Racing Muffler
Racing Brakes
Brake Balance Controller
Port & Polish
Engine Balancing
Full Customize Transmission
Triple Plate Clutch
Racing Flywheel
Fully Customizable LSD
Turbo Stage 1
Racing Suspension
S3 Tires
Weight Reduction Stage 3
Rigidity refresher if necessary, but NOT the roll cage

After all of this, get an oil change and buy a wing.

Total horsepower: 375 (garage)
Weight: 1079 kg

Settings
Suspension:
Springs: 6.8 / 8.4
Ride Height: 98 / 98
Damper Bound: 6 / 5
Damper Rebound: 7 / 4
Camber: 2.0 / 1.5
Toe: -1 / -2
Stabilizers: 3 / 1

Transmission:

Click Default if prior settings were used. In this order, move the Final Drive Ratio to 4.800, then place the Autoset at 5, and bring the Final Drive Ratio to 3.800. Then for the individual gears, move 1st and 2nd gear .020 to the left. Move third gear .030 to the left. Other than this, leave the gears the way they are.

Brake Balance Controller: 4 / 6

Downforce: 30 / 22

LSD:
Initial: 15
Accel: 25
Decel: 5

Ballast: None

Aids: :yuck:

(in other words, none).

After a long day of work, I was cruising past some rural farm fields when I saw a crop circle. Sure enough, I parked on the side of the road and found this car in the center, devoid of all paint. The charred flux capacitor was found a couple feet away, smoldering in the grass. Fortunately, the plutonium reactor and time circuits were mostly intact. Immediately, I knew what was to be done. After countless nights of labor fabricating suspension parts and fixing the electrical circuits, it was ready.

It was taken to Motegi East course, where I attempted to fire up the flux capacitor to no avail (apparently I'm not a nuclear physicist :dunce:

). Even without warping time, it rocketed to a hot lap of 1'24.447. This futuristic car is no slouch on the track and is capable of drifting with harder tires equipped. Give credit to the amazing chassis design and the corresponding low weight. Colin Chapman would be proud.

mcsqueegy · Jul 1, 2009

Supercar Entry!
Nissan 350Z GT Limited Edition '05 (sorry, no pic)
441bhp, 1228kg, 2.785kg/HP

Parts List:
Racing Chip
Port Polish
Engine Balancing
Supercharger
Brake Balance Controller
Racing Brakes
GT Wing
FC Transmission
Triple Clutch
Racing Flywheel
Carbon Driveshaft
Weight Reduction Stage 3
S3 Tyres
Racing Suspension

Suspension:

Spring rate: 11.5/9.5
Ride height: 90/105
Shock bound: 4/3
Shock rebound: 5/4
Camber: 2.0/1.0
Toe angle: 2/-1
Stabilisers: 4/3

Gears:

Use Tranny trick: Set Final ratio to 5.500, then set auto to 1, then adjust the rest.

1st: 2.403
2nd: 1.800
3rd: 1.400
4th: 1.160
5th: 1.000
6th: 0.867

Other parts:

BBC: 5/4
Downforce: 30/26
LSD 15/20/5
Ballast: 4kg @ 0 (otherwise it doesn't make the p/w ratio!)

Notes:
Originally the car was extremely harsh... it suited me, but I made it easier to drive for you guys. That 1/2 second I lost in lap times better be worth it

Hopefully it's 50min early, and not 10 mins late :scared:

Tuner Challenge Version 5.

Lucas

Kingofweasles

mazdaman

CamryFan

mazdaman

Attachments

Rotary Junkie

Rotary Junkie

Skygrasper550

Back and forth between gaming and Gunpla

Kingofweasles

Kingofweasles

Kingofweasles

VTiRoj

Howdy 🤠

mafia_boy

PF

CamryFan

CamryFan

PF

mafia_boy

Rotary Junkie

Tandem

mcsqueegy

Similar threads

Latest Posts