Rob's Cockpit

robulus · Nov 17, 2010

Thought I'd throw up some pics of my rig. It's a DIY job so it might help people looking for ideas.

I started out with my DFGT mounted on a metal trolley that we had lying around. This was a little low, and I couldn't get the seat right, so I came up with this PVC tubing base, that extends and angles it. It is very rigid, much firmer than it looks! I made a hinged stand for the pedals so I can adjust the incline, and I got a car seat from a local wrecker for $50.

I bought a rumble cushion and pulled the speaker out of it, removed a little foam from the lumbar area of the car seat, and have mounted the rumble cushion in there. I found this works great, but is a bit distracting during replays etc, so I mounted a simple switch on the side of the seat. This works perfectly, I just flick the rumble pad on at the start of a race.

All packs away neatly, which keeps the wife happy.

Edit: I took some better shots, as the old ones were taken at night with a flash. These show the geometry a lot better.

Older images:

Bscary · Nov 17, 2010

cool. but whats up with that horizontal pvc pipe? doesnt it hit the back of your legs. also, the bracket on the pedals looks like it can slide down if you put for on it since its got a sliding space to adjust nothing is keeping it from giving and sliding down.

robulus · Nov 17, 2010

Bscary
cool. but whats up with that horizontal pvc pipe? doesnt it hit the back of your legs. also, the bracket on the pedals looks like it can slide down if you put for on it since its got a sliding space to adjust nothing is keeping it from giving and sliding down.

An excellent question. The horizontal PVC pipe sits over a horizontal bar on the metal trolley. So it provides rigidity to both structures. It is a pain in the ass when you get in, you have to tilt the wheel forward, but once you are in your legs go straight over it. If I was designing it from scratch this would be different!

The screws hold the bracket on the pedals tight, it doesn't slip. I also glued a cut out from a rubber mat to the base, so it doesn't slide on the rug. The only issue with it is that it is not perfectly stable, it will rock diagonally with pressure particularly on the brake, but I've found in use it feels fine.

purzo · Nov 18, 2010

Did you mount the seat directly to the floor?

Corza · Nov 18, 2010

Pretty cool that you were able to angle the wheel and keep it stable.

purzo
Did you mount the seat directly to the floor?

That would be hardcore. Especially if you were renting.

robulus · Nov 18, 2010

purzo
Did you mount the seat directly to the floor?

Heh heh heh. I bolted wood blocks onto the seat fitting points. It took about twenty minutes, and was only supposed to be temporary, but it's held up fine and the seat sits solid as a rock.

robulus · Nov 18, 2010

Corza
Pretty cool that you were able to angle the wheel and keep it stable.

First attempt I had the 90 degree bends at the front, and it rolled forward. Once I used the t join it was fine.

Tweepent · Dec 14, 2010

Great cockpit, but, uh, what's the arcade game in the background? :dopey:

robulus · Jan 18, 2011

Tweepent
Great cockpit, but, uh, what's the arcade game in the background?

That would be my MAME cabinet. It is the second most amazing thing in the Universe, next to my NEW COCKPIT!

CAMikaze · Jan 18, 2011

robulus
That would be my MAME cabinet. It is the second most amazing thing in the Universe, next to my NEW COCKPIT!

With apologies to the original cast of South Pacific "There is Nothin' Like a MAME"

robulus · Jan 18, 2011

Well, nothing you can name, at any rate....

Rob's Cockpit

robulus

Bscary

robulus

purzo

Corza

robulus

robulus

Tweepent

robulus

CAMikaze

For Japan and Racing Miku. ^_~

robulus

Similar threads

Latest Posts