Bugatti Tune for Route X

B

bmwlover210

3

• Jan 22, 2012

• #1

Do you guys have a good tune for the Veyron for route x? (Noob question, i know...) i heard people get 350mph but not sure how. Well of course there's drafting but some people do it without that...so give me some tunes! Thanks

 

Last edited: Jan 22, 2012

F

frontrunner91

111

FrontRunner91

• Jan 22, 2012

• #2

Veyron with 1256 hp 1424 kg 694 pp
Suspension settings
Ride height 40 , -25
Springs 7.5 , 20
Damps ext. 1 , 10
comp 1 , 10
Bars 1 , 1


Trans
7th gear .780
Final 2.214


0 Toe 0 Camber

75 KG front ballast ? it works?

No draft, no rolling start 10k speed test run line to line 301.9mhp on race soft tires

 

Keef

Premium

25,057

Dayton, OH

GTP_KeefRacer

GTP Keef

• Jan 22, 2012

• #3

I can't provide a tune right now, but I'm at 295.5 on sports hard tires. Haven't tried the race softs yet. I wanted to perfect on these tires (probably not done yet) and move up from there. 5.4 extra mph takes quite delicate gearing at these speeds!

As for that crazy ride height, I don't like using glitches in the game like that. I try to stick to realistic tuning techniques, however extreme. Raising the front and lowering the rear might work for drag strip launches, but certainly not at 300 mph!

 

B

bmwlover210

3

• Jan 22, 2012

• #4

frontrunner91

Veyron with 1256 hp 1424 kg 694 pp
Suspension settings
Ride height 40 , -25
Springs 7.5 , 20
Damps ext. 1 , 10
comp 1 , 10
Bars 1 , 1


Trans
7th gear .780
Final 2.214


0 Toe 0 Camber

75 KG front ballast ? it works?

No draft, no rolling start 10k speed test run line to line 301.9mhp on race soft tires

Click to expand...

about to try this, thanks!

 

dikei27GR

2

greece

dikei27GR

• Jan 22, 2012

• #5

frontrunner91

Veyron with 1256 hp 1424 kg 694 pp
Suspension settings
Ride height 40 , -25
Springs 7.5 , 20
Damps ext. 1 , 10
comp 1 , 10
Bars 1 , 1


Trans
7th gear .780
Final 2.214


0 Toe 0 Camber

75 KG front ballast ? it works?

No draft, no rolling start 10k speed test run line to line 301.9mhp on race soft tires

Click to expand...

Thanks man got up to 485.2 km/h or 301.5 mph.My personal best was 477kmh.Thanks again.

 

F

frontrunner91

111

FrontRunner91

• Jan 22, 2012

• #6

dikei27GR

Thanks man got up to 485.2 km/h or 301.5 mph.My personal best was 477kmh.Thanks again.

Click to expand...

You're Welcome. If you find more speed please pass it along. I always run the 10k speed test line to line no run up for speed testing. Drafting requires setting the car up differently and since those guys are running the full lap they should consider be running for best lap time instead of top speed. In real life top speed runs are done under very controlled conditions with no outside assistance on pre measured distances. The 10 k speed test most accurately represents a realistic speed test

 

Agent75

55

Agent75

• Jan 22, 2012

• #7

Yes, with that tune it spins out going uphill, never mind corners.

 

VTiRoj

Howdy 🤠

Premium

6,380

United Kingdom

RoJJieE

mb6roj

• Jan 22, 2012

• #8

You may be able to squeeze 302mph out of it if you play with the gearbox some more. I used your settings and only managed 301.8mph. I adjusted the gears a bit to increase acceleration (only leaving 7th and the final as you set them) and got 301.9mph. I'll leave the settings here incase anyone is interested.

1st: 4.111
2nd: 2.770
3rd: 2.053
4th: 1.580
5th: 1.245
6th: 1.003
7th: 0.780
Final: 2.214
Max Speed: 255

 

QRio_2011

158

United States

QRio_2011

• Jan 22, 2012

• #9

Very VERY interesting thread!

I'd like to know why you set Springs,Dampers, Compres and Bars like you do.

Because (from what I know) if you set Bars to the highest value, the car will be more stabe. (I dont know if a higher value will affect top speed).

Furthermore, I don't understand why you set a very low Front Spring rate and a higher value for the back. I'd do the COMPLETE OPPOSITE.... Setting example: 20-7,5

Finally, I set 0 ballast in possition 50 (the back of the car)... At least for 1/4 mile Indy it worked.

Right now I'm reaching 450km/h without drafting. (equivalent to 280 miles per hour)

 

F

frontrunner91

111

FrontRunner91

• Jan 22, 2012

• #10

QRio_2011

Very VERY interesting thread!

I'd like to know why you set Springs,Dampers, Compres and Bars like you do.

Because (from what I know) if you set Bars to the highest value, the car will be more stabe. (I dont know if a higher value will affect top speed).

Furthermore, I don't understand why you set a very low Front Spring rate and a higher value for the back. I'd do the COMPLETE OPPOSITE.... Setting example: 20-7,5

Finally, I set 0 ballast in possition 50 (the back of the car)... At least for 1/4 mile Indy it worked.

Right now I'm reaching 450km/h without drafting. (equivalent to 280 miles per hour)

Click to expand...

Why is easy, it is what I have found to work in this game.

Forget what should work in the real world. This is a game. Numbers plugged into various positions in a peice of software giving certain results.

 

QRio_2011

158

United States

QRio_2011

• Jan 23, 2012

• #11

It spins in the corner.....

 

shmogt

5,812

shmogt

• Jan 23, 2012

• #12

this thread ask the same stuff https://www.gtplanet.net/forum/showthread.php?t=240899

 

F

frontrunner91

111

FrontRunner91

• Jan 23, 2012

• #13

QRio_2011

It spins in the corner.....

Click to expand...

It is a tune for the 10Km speed test. Not meant to corner.