Fanatec ClubSport F1 (Clubsport DD+) Settings for GT7 (v1.55) and new Fanatec Driver 464

[FinalLapFury]

Hi everyone,

I just received the Fanatec ClubSport F1 and updated all the drivers to the latest version (464). I’m currently using Gran Turismo 7 version 1.55.

I’ve attached a screenshot of my current settings and included a text version below to make it easier to provide feedback:

Wheel Base Values | High Torque Mode:
Max Torque Output: 9 Nm
[SEN] Sensitivity: AUTO
[FFB] Force Feedback Strength: 60%
[FUL] FullForce: 49%
[NDP] Natural Damper: 20%
[NFR] Natural Friction: 1%
[NIN] Natural Inertia: 1%
[INT] FFB Interpolation Filter: 3
[FEI] Force Effect Intensity: 50
[FOR] Force Effect Strength: 100%
[SPR] Spring Effect Strength: 100%
[DPR] Damper Effect Strength: 100%

I’d really appreciate it if anyone could share a solid starting point configuration for these versions. Thanks in advance for your help!

 

[Abarth_71]

Can't really help with main settings too much as I'm on a DD Pro 8Nm but I've put mine below if you want to give them a try. I can tell you that there's no support for Fullforce yet in GT7. Additionally SPR & DPR have no effect in the game other than SPR being used to centre the wheel while in the menus.

FFB 100 so you may want to reduce that a bit
NDP 42
NFR 25
NIN 10
INT 15
FEI 80
FOR 80
In game 6 & 10

 

[RS60NR]

The Auto setup (A_S) on the menu tuning for the wheel in GT7 is actually quite a good place to start. PD clearly did spend some time on that for the DD+, I assume torque 5, sens 5 likely

So set the wheel to A_S on tuning menu, start GT7, the open the tuning menu on the wheel. While you can’t change anything in A_S, you can scroll across and go into each value - record these and then add them to a tuning slot so you can make some adjustments to suit your taste

I use in game torque 4 and sens 8, so try either torque 4 or 5 and sens 5-8 to suit - sens seems to adjust the stiffness of the steering mechanism