I want to get my carbon x1to go over 300 on its own speed what do i do?

[LEDLITES]

My down force is as low as posable my transmission is to the max i chainged my oil but i cant get over 299 mph help!!!!

 

[GfxJG]

If it can't go 300, then it can't go 300. Deal with it.

 

[Jessieo]

Draft in like the wind, just at the right time and you will hit 300. Be careful you will come up on them very quickly.

 

[GfxJG]

Draft in like the wind, just at the right time and you will hit 300. Be careful you will come up on them very quickly.

He said under it's own speed.

 

[itstheDRE4M]

Did you change the oil when you first got the car? Because it should have 15xxhp*

My x2010 easily hits 300+ under it's own speed..

Increase your final gear to 4.000, then increase your top speed to MAXIMUM... and go back and decrease your Final Speed.. you can get up to 400mph I think, but obviously the engine can't push that hard. Just make it... 320ish..

My X2010 is set to TOP SPEED 311mph and final gear of 2.815.. giving it an actual speed of 321. It runs 300+ down sarthe(no chicanes)

 

[shmogt]

Just set the final gear higher. Fastest I ever went it 350mph with small drafting

 

[Machate-man]

It's called 50/50 downforce!

Just set the final gear higher. Fastest I ever went it 350mph with small drafting

This^^^ Too:tup:

 

[FULL_THROTTLE]

Use racing soft tyres on a long straight

 

[veyron1001]

if it can't go 300, then it can't go 300. Deal with it.

+1

 

[Laughlyn]

it needs engine to be worn in a bit and u need a course with a good straight, Circuit De La Sarthe 2009 (no chicanes) is best. drop all aero to lowest and push transmission to max. when engine is worn in u shud be getting about 1560bhp, give or take.
I managed to get mine to about 305mph on its own and upto 316mph with drafting