Looking for a tune for the Zonda C12S 7.3 for Daytona Super Speedway

[Eric W]

I've been trying to tune the Zonda C12S 7.3 for the Daytona Superspeedway but haven't hit upon a good setup yet. I've read the GT5 tuning guides at the top of the tuning forum which is helping but the car is so unstable at Daytona I can't get a good base line to begin tuning it.

The Zonda gets extremely loose in the middle of the turn, to the point where it spins out. It's also weird how differently the car handles in game vs. online. It seems to handle fine while testing at Daytona in practice mode but as soon as I use it online I can't keep it pointed in the right direction.

I'm still trying to learn how to tune my own cars but haven't quite figured it out yet.

I've tried the Lion's Den tune for this car but I still don't like the way the Zonda handle at Daytona.

 

[200MphFord]

Stiffen the springs ALOT. Raise the settings on the differential(LSD) and give it a good amount of Camber. I'd say 2.0 or above both front and rear. dont mess with the ride height too much because its fine where its at. Try that and report back.

 

[strutr74]

Ballast 10k at neg 48
lsd 6 26 10

ride -5f +30r
spring 17.5f 14.5r
damp 8f 6r
damp 10f 10r
roll 2r 1r

Cam 1.1f 2.0r
toe -50f +60r

Brakes 6f 4r


This is for Daytona, You can mess with the toe some as its extreme but you can push it hard set like that on Daytona, Gt 06,Caddys,Enzos,Vips watch out..

 

[Eric W]

Wow, thank for that tune! I don't think that I would have ever come up with a tune like that.

 

[Eric W]

The only thing that I changed in your setup is the Toe. The Toe you have just ate up the LF and RR tires almost instantly. I ended up reducing the Toe setting to -10f and +10r and it ran better for me. Thanks again!