Peugot 908 HDI Setup - feedback pls!

[AcceptYourDeath]

I`d like to have feedback about following setup for a Peugot 908 HDI FAP

initial torque: 25
acc. sense: 5
brake sense: 20


ride height : -2 / -2
spring rate : 12.8 / 13.8
extension: 8 / 8
compression: 8 / 8
anti-roll bars: 6 / 6

camber Angle: 0.7 / .07
toe Angle: 0.00 / 0.20

It`s pretty much the basic setup, the only goal I had when I bought that car and doing some test laps to minimize slip at full throttel.

 

[Magicman4755]

if your looking for Acceleration out of turns move the LSD to Int/torq to 20, Accel to 60 braking to 20, the susp. looks good, if you want more speed lower it all the way then put your spring rate up a little and extension compression down 1 both.

 

[mindspin311]

Accel to 60 basically puts it at a locked diff under any acceleration situation. Im pretty sure that would cause tons of understeer any time you try and accelerate out of a corner.