- 1,304
- United Kingdom
Yay! I will test this out now
RIDOX Replica Garage-In Memory of TurnLeft-GT40,300ZX,F430,TVR,AEM S2000,Cizeta,TransAm Doug Nash
- Thread starter Ridox2JZGTE
- 5,032 comments
- 917,620 views
- 1,377
- United States
- Firehound427
- CivicTypeR15
Very nice. Unfortunately, I am going away very soon and will not be back until next week. I hope to give this one a test (and maybe compare it to the Kamiya Evos) soon![WIP]Makoto Mori****a Subaru Impreza GC8 STi Version VI '99 400HP Wangan Midnight
Tuned to replicate Makoto Mori****a GC8 Impreza Wangan Midnight
Comfort Soft
CAR : Subaru Impreza Coupe WRX typeR STi Version VI '99
Tire : Comfort Soft
Specs
Horsepower: 400 HP at 6400 RPM
Torque: 356.0 ft-lb at 5200 RPM
Power Limiter at : 96.6%
Weight: 1050 kg
Ballast : 5 kg
Ballast Position : 50
Weight Distribution : 54 / 46 as stock
Performance Points: 523
GT AUTO
Oil change
Improve Body Rigidity ( NOT INSTALLED in this build )
Wheels : +2 Inch Up - ENKEI RC-T4 in Dark Silver
Custom Rear Wing :
Wing Mount Standard Type D
Wing Large Type E
Winglets Large Type C
Height -5 and Width +18
Car Paint : Arctic Silver Metallic ( choose this when buying )
Tuning Parts Installed :
Semi Racing Exhaust
Isometric Exhaust Manifold
Intake Tuning
High RPM Range Turbo Kit
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch Kit
Fully Customizable Dog Clutch Transmission
Weight Reduction Stage 3
Driver Controlled Center Differential ( DCCD ) - stock part.
LSD ( ZERO SPORTS GT 1.5 way rear and front -custom preload and locking rate )
FRONT - GT ZLF 101
Initial Torque : 15
Acceleration Sensitivity: 30
Braking Sensitivity: 10
REAR - GT ZLR302 (R180)
Initial Torque : 20
Acceleration Sensitivity: 30
Braking Sensitivity: 15
Driver Controlled Center Differential
FRONT/REAR = 35/65 ( STOCK )
Suspension - ZERO SPORTS WINNING RS Coil Over Kit
Front, Rear
Ride Height: 100 100
Spring Rate: 7.00 5.00
Dampers (Compression): 5 6
Dampers (Extension): 6 6
Anti-Roll Bars: 3 3
Camber Angle: 0.2 0.2 ( 0.00 all around for max grip )
Toe Angle: -0.07 0.00
DOG CLUTCH TRANSMISSION - Corrected stock gearing and low final gear
Set Default
Set Final to 5.000
Set Auto Max Speed to 270kmh / 168mph
Adjust each gear :
1st 3.083
2nd 2.062
3rd 1.545
4th 1.151
5th 0.845
6th 0.745
Set Final Gear : 3.475
Brake Balance:
7/8 ( personal BB) or for ABS 0 wheel : 8/8, for ABS 1 7/8 or feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/8 brake balance as starting point.
Notes :
Work in progress - Makoto Mori****a GC8 WRX 400HP Wangan Midnight, please leave feedback and input for visual parts
- 3,383
- Milky Way, Earth
- danbojte
Why I'm not included for the R8 updates?!@Fanapryde, @sumbrownkid, @OdeFinn, @Dr_Grip_GT
The Audi R8 LMS Ultra Team Phoenix has been updated, with alternate suspension and aero added, aiming to give better low speed stability and better directional changes at medium/high speed. Tested at Silverstone GP on 552HP, able to post 1:59s lap with ease, also tested at Bathurst and drives well there. This alternate version will also be the base for the Audi R8 LMS Ultra '12 Plain version.
@danbojte, @f1357924680, @Pete05
Ferrari 458 GT3 replicas ( all 3 ) has been updated, added wheel selection, custom rear wing, and detailed spring rate value under notes
@KazaMR2 : If you are interested, I will post the base tune for the GC8 Makoto Mori****a.
- 3,383
- Milky Way, Earth
- danbojte
Big improvement, 552BHP, RH, Camber, ABS 0 (5/4), Group GT3 Series, Silverstone GP, 2:03.554 - Racing Conditions. 👍AUDI R8 LMS Ultra (Audi Sport Team Phoenix) '12 489HP to 552HP BLANCPAIN version
Tuned to replicate Audi R8 LMS Ultra Blancpain
Sports Soft to Racing Hard
CAR : Audi R8 LMS Ultra ( Audi Sports Team Phoenix ) '12
Tire : Sports Soft to Racing Hard
Specs
Blancpain Max Power 412kW
Horsepower: 552 HP at 8000 RPM
Torque: 417.6 ft-lb at 6500 RPM
Power Limiter at : 99.6%
Weight: 1250 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 45 / 55 as stock
Performance Points: 607
Blancpain power based on 2.5 Kg/Hp or 500HP
Horsepower: 500 HP at 6400 RPM
Torque: 417.0 ft-lb at 6300 RPM
Power Limiter at : 90.4%
Weight: 1250 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 45 / 55 as stock
Performance Points: 594
Blancpain power based on maximum restrictor 365kW
Horsepower: 489 HP at 6400 RPM
Torque: 416.4 ft-lb at 6100 RPM
Power Limiter at : 88.2%
Weight: 1250 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 45 / 55 as stock
Performance Points: 591
GT AUTO
OIL CHANGE
Improve Body Rigidity ( optional - not installed in this build )
Wheels : Stock
Car Paint : Stock
Tuning Parts Installed :
Racing Exhaust
Suspension Fully Customizable Kit
Adjustable LSD
Racing Brakes Kit
AERO :
FRONT : 230
REAR : 680 ( Alternative setup is to use stock value or whatever values that suits the track or preferences - I recommend no more than 300 front aero and 730 rear aero, too high will lower acceleration and top speed)
LSD - 2 way high preload
Initial Torque : 28
Acceleration Sensitivity: 38
Braking Sensitivity: 38
Suspension - EIBACH ERS Coil Springs with Bilstein Damper
Front, Rear
Ride Height: 75 75
Spring Rate: 21.43 16.87
Dampers (Compression): 6 7
Dampers (Extension): 5 4
Anti-Roll Bars: 5 4
Camber Angle: 0.2 0.2 ( use zero camber for max grip )
Toe Angle: -0.07 0.07 - increase rear toe in if want more stability in low speed, I recommend no more than 0.21 as it makes the rear harder to rotate.
New Update / Alternate version with better low speed stability ( Suspension + Aero )
Ride Height: 75 75
Spring Rate: 21.43 18.69
Dampers (Compression): 6 7
Dampers (Extension): 5 5
Anti-Roll Bars: 5 4
Camber Angle: 0.4 0.0
Toe Angle: -0.07 0.18
Alternate Aero :
FRONT : 280
REAR : 680
Transmission - Sequential 6 Speed Adapted Homologated Ratio
Install all power parts
Set Default
Set Final to 5.000
Set Auto Max Speed at 250kmh / 155mph
Adjust each gear :
1st 3.032
2nd 2.235
3rd 1.765
4th 1.474
5th 1.238
6th 1.037
Set Final : 3.889
Brake Balance
5/4 ( personal BB) or for ABS 0 wheel : 5/4, for ABS 1 - feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 5/4 brake balance as starting point.
Notes :
This is a replica of Audi R8 LMS Ultra Blancpain version, the power figures depend on the restrictor usage, so I have provided 3 different power levels.
The suspension has been overhauled from my older tune, incorporating new spring rate, damper, ARB, toe and camber. With the new setup, I can use same camber front and back, unlike in the older version
Overall the car is easier to drive, safer, and more consistent.
For LSD, I have used the same 2 way setup, with similar setup like in 458 GT3, while gearing also adapted from 458 GT3 homologated ratios, and it worked so well with the R8 LMS.
I have tuned and tested the car at Tsukuba, Brands Hatch GP, Bathurst, Silverstone GP, Nurburgring 24H and Spa
With stock gearing and 528HP, it manages 52.5xxs at Tsukuba, 1:23.3xxs at Brands Hatch GP, 2:04s at Bathurst and 2:01s at Silverstone GP, all on 1st lap
To replicate 2014 Audi R8 LMS, I would suggest to run at 500HP
Please leave feedback about the replica, I always consider this car as a work in progress
UPDATE : Added new alternate suspension and aero set, the alternate setup offers better low speed stability and lighter steering at medium and higher speed, LSD remains the same. The new alternate setup is capable of 1:59s at Silverstone GP
- 11,660
- GTP_Orido
- 11,660
- GTP_Orido
Autodelta Alfa Romeo Giulia Sprint 1600 GTA Historic Touring / Rally Car
Special Build of Autodelta Alfa Romeo 1600 GTA
Comfort Soft to Racing Hard
Special Build of Autodelta Alfa Romeo 1600 GTA
Comfort Soft to Racing Hard
CAR : Alfa Romeo Giualia Sprint 1600 GTA '65
Tire : Comfort Soft to Racing Hard
Specs
Horsepower: 184 HP at 6700 RPM
Torque: 152.9 ft-lb at 3900 RPM
Power Limiter at : 97.0%
Weight: 740 kg
Ballast : 5 kg
Ballast Position : 50
Weight Distribution : 54 / 46 as stock
Performance Points: 445
GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - for racing tires fitment
Wheels : Standard Size - PDI P525N in White or Silver or Black
Car Paint : Alfa Red
Tuning Parts Installed :
Engine Tuning Stage 2
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch Kit
Fully Customizable Dog Clutch Transmission
Window Weight Reduction
Racing Brakes Kit
Suspension - Autodelta GTAm Coil Over Kit
Front, Rear
Ride Height: 75 75
Spring Rate: 9.00 4.28
Dampers (Compression): 3 5
Dampers (Extension): 3 4
Anti-Roll Bars: 2 3
Camber Angle: 0.2 0.2 ( 0.00 all around for max grip )
Toe Angle: -0.07 0.00
DOG CLUTCH TRANSMISSION - GTA Racing Close Ratio Gear Set with Stock Final
Set Default
Set Final to 5.000
Set Auto Max Speed to 220kmh / 137mph
Adjust each gear :
1st 2.536
2nd 1.701
3rd 1.256
4th 1.000
5th 0.856
Set Final Gear : 4.555 ( Optional Alfa Romeo Final Gear : 3.728, 3.910, 4.100, 4.780, 5.125, 5.375, and 5.860 - shortest )
LSD - 2 Way ZF LSD with 4 Lock Position - 35% Lock
Initial Torque : 32
Acceleration Sensitivity: 20
Braking Sensitivity: 20
Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 4/5 or feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.
Notes :
Inspired by classic historical touring car and rally car from 60's, I made this special build, not a replica, but rather a tune with replica theme
I based this tune on a real car that has Furiani built racing engine at 184HP that was installed on a very rare race spec Autodelta built Alfa Romeo 1600 GTA ( there were only around 40 built ). The real car has roll cage, 5 speed close ratio gearbox, custom suspension and dry weight at 740kg.
For suspension, I used real life approach in tuning, 1600 GTA has a high rear roll center, while the front has low roll center, even more so when the car is lowered, this produces steep roll axes. This is the main reason the car needs to run very stiff front springs and very soft rear in real life, the same applies in GT6
. This also creates another problem which requires good damper and ARB tuning to balance things out. I settled for 9k/4.28k springs with damper tuned to even the load, and ARB to stabilize the car on entry and mid corners.LSD is based on 2 way competition spec ZF LSD with larger friction plates, and 4 lock position at 25%, 35%, 50%, and 70%. For this build, I chose 35% lock with optimized initial torque for balance on all tire grades from comfort/street to racing/slick tire.
Gearing is based on racing spec close gear set, with a host of factory final gear options from Alfa Romeo ranging from 3.728 to 5.860. The stock final 4.555 is used on this build.
I tuned and tested on a variety of tracks, from Autumn Ring Mini, Tsukuba, Silverstone Stowe, Fuji Speedway F, and Brands Hatch GP.
When tested at Tsukuba, it managed 1:08s on comfort soft, and at Autumn Ring Mini 45s on comfort soft
.The car has a a lively rear on mid corner to exit, easily controlled with throttle. This gives the driver so much fun and enjoyment on all tires from comfort to racing tires. With racing hard, it's capable of easily post sub 2 minutes at Fuji Speedway F.
Last edited:
- 3,383
- Milky Way, Earth
- danbojte
Yes, you can make it primary. It is still nasty, but not like before. I felt like it ran better in the first lap?! I don't know, maybe it becomes a little worst when the tires are heating up?! Anyway, it is much better now but remains "in progress"That's great, so maybe I can put the alternate suspension and aero as primary tune. The alternate tune also works on the plain R8 LMS
👍
- 11,660
- GTP_Orido
Yes, you can make it primary. It is still nasty, but not like before. I felt like it ran better in the first lap?! I don't know, maybe it becomes a little worst when the tires are heating up?! Anyway, it is much better now but remains "in progress"
About the car being worst with heated tires, can you describe it ? It may have to do with the rear toe. I will play with LSD more
- 3,383
- Milky Way, Earth
- danbojte
I don't know, maybe it was just a false impression about that annoying oversteer became stronger than in the first lap...I have to recheck this.About the car being worst with heated tires, can you describe it ? It may have to do with the rear toe. I will play with LSD more
💡
- 11,660
- GTP_Orido
A good informative discussion about LSD that is currently very active, some great posts about LSD there 👍
https://www.gtplanet.net/forum/thre...a-logger-evidence-inside.307085/#post-9568463
https://www.gtplanet.net/forum/thre...a-logger-evidence-inside.307085/#post-9568463
- 11,660
- GTP_Orido
Autodelta Alfa Romeo Giulia Sprint 1600 GTA Historic Touring / Rally Car
Special Build of Autodelta Alfa Romeo 1600 GTA
Comfort Soft to Racing Hard
CAR : Alfa Romeo Giualia Sprint 1600 GTA '65
Tire : Comfort Soft to Racing Hard
Specs
Horsepower: 184 HP at 6700 RPM
Torque: 152.9 ft-lb at 3900 RPM
Power Limiter at : 97.0%
Weight: 740 kg
Ballast : 5 kg
Ballast Position : 50
Weight Distribution : 54 / 46 as stock
Performance Points: 445
GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - for racing tires fitment
Wheels : Standard Size - PDI P525N in White or Silver or Black
Car Paint : Alfa Red
Tuning Parts Installed :
Engine Tuning Stage 2
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch Kit
Fully Customizable Dog Clutch Transmission
Window Weight Reduction
Racing Brakes Kit
Suspension - Autodelta GTAm Coil Over Kit
Front, Rear
Ride Height: 75 75
Spring Rate: 9.00 4.28
Dampers (Compression): 3 5
Dampers (Extension): 3 4
Anti-Roll Bars: 2 3
Camber Angle: 0.2 0.2 ( 0.00 all around for max grip )
Toe Angle: -0.07 0.00
DOG CLUTCH TRANSMISSION - GTA Racing Close Ratio Gear Set with Stock Final
Set Default
Set Final to 5.000
Set Auto Max Speed to 220kmh / 137mph
Adjust each gear :
1st 2.536
2nd 1.701
3rd 1.256
4th 1.000
5th 0.856
Set Final Gear : 4.555 ( Optional Alfa Romeo Final Gear : 3.728, 3.910, 4.100, 4.780, 5.125, 5.375, and 5.860 - shortest )
LSD - 2 Way ZF LSD with 4 Lock Position - 35% Lock
Initial Torque : 32
Acceleration Sensitivity: 20
Braking Sensitivity: 20
Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 4/5 or feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.
Notes :
Inspired by classic historical touring car and rally car from 60's, I made this special build, not a replica, but rather a tune with replica theme
I based this tune on a real car that has Furiani built racing engine at 184HP that was installed on a very rare race spec Autodelta built Alfa Romeo 1600 GTA ( there were only around 40 built ). The real car has roll cage, 5 speed close ratio gearbox, custom suspension and dry weight at 740kg.
For suspension, I used real life approach in tuning, 1600 GTA has a high rear roll center, while the front has low roll center, even more so when the car is lowered, this produces steep roll axes. This is the main reason the car needs to run very stiff front springs and very soft rear in real life, the same applies in GT6
LSD is based on 2 way competition spec ZF LSD with larger friction plates, and 4 lock position at 25%, 35%, 50%, and 70%. For this build, I chose 35% lock with optimized initial torque for balance on all tire grades from comfort/street to racing/slick tire.
Gearing is based on racing spec close gear set, with a host of factory final gear options from Alfa Romeo ranging from 3.728 to 5.860. The stock final 4.555 is used on this build.
I tuned and tested on a variety of tracks, from Autumn Ring Mini, Tsukuba, Silverstone Stowe, Fuji Speedway F, and Brands Hatch GP.
When tested at Tsukuba, it managed 1:08s on comfort soft, and at Autumn Ring Mini 45s on comfort soft
The car has a a lively rear on mid corner to exit, easily controlled with throttle. This gives the driver so much fun and enjoyment on all tires from comfort to racing tires. With racing hard, it's capable of easily post sub 2 minutes at Fuji Speedway F.
I have posted the AutoDelta Alfa Romeo 1600 GTA
That car is bags of fun, nimble and quick.@Ronald6 : The early build of the Legacy GTB Rally spec
- 4,131
- Lost...
OMG! I cant keep up with such amazing cars... Maybe I should better hire someone to build the replicas all day...
Chat soon.
@Ridox2JZGTE, a little help my friend: on your replica of the 458 Itália GT3 Base model, I noticed that the car has some difficult turning, it goes in front if a early acceleration is applied... Is it like the real car?
Chat soon.
@Ridox2JZGTE, a little help my friend: on your replica of the 458 Itália GT3 Base model, I noticed that the car has some difficult turning, it goes in front if a early acceleration is applied... Is it like the real car?
- 11,660
- GTP_Orido
OMG! I cant keep up with such amazing cars... Maybe I should better hire someone to build the replicas all day...
Chat soon.
@Ridox2JZGTE, a little help my friend: on your replica of the 458 Itália GT3 Base model, I noticed that the car has some difficult turning, it goes in front if a early acceleration is applied... Is it like the real car?
Do you mean understeer ? if the car is too tight / harder to turn on exit, lower the LSD accel value
The real car has 2 way LSD, as most race cars do, 2 way LSD requires the driver to manage throttle and brake to give best possible traction in all situation. Unlike 1.5 way LSD that are commonly used on the street / street legal cars.From the replica notes :
Static initial/preload at 28.
accel 48 / brake 45 ( neutral entry, very tight mid corner to exit )
accel 47 / brake 45 ( neutral entry, tight mid corner to exit )
accel 46 / brake 45 ( neutral entry, moderate mid corner to exit )
----accel 45 / brake 45 ( neutral all around - used on the tune )
accel 45 / brake 48 ( very tight entry, neutral mid corner to exit )
accel 44 / brake 44 ( slightly loose entry, slightly loose mid corner to exit ) - running lower will make the car more loose.
If you want to retain the braking/entry characteristics, leave the brake value alone, and lower the accel only
By the way, have you installed body rigidity ?Also if you prefer loose car / easy to throw around, try accel at 30 and brake at 30.
Giggity.
Now... if onlt GT6 had Rally Cross. Oh, well, gravel will do. 👍 👍
Edit: Subaru, it gives you wings!
I will PM you the early build tune if you like to test it.
- 4,131
- Lost...
Do you mean understeer ? if the car is too tight / harder to turn on exit, lower the LSD accel value
From the replica notes :
Static initial/preload at 28.
accel 48 / brake 45 ( neutral entry, very tight mid corner to exit )
accel 47 / brake 45 ( neutral entry, tight mid corner to exit )
accel 46 / brake 45 ( neutral entry, moderate mid corner to exit )
----accel 45 / brake 45 ( neutral all around - used on the tune )
accel 45 / brake 48 ( very tight entry, neutral mid corner to exit )
accel 44 / brake 44 ( slightly loose entry, slightly loose mid corner to exit ) - running lower will make the car more loose.
If you want to retain the braking/entry characteristics, leave the brake value alone, and lower the accel only
Also if you prefer loose car / easy to throw around, try accel at 30 and brake at 30.
.
Yes! Understeer, missing the word. I installed body rigidity. I actually prefer rear tight cars, but I noticed that, despite the car does the corner ok, at midway it gets harder to steer, like you said it turns harder/tighter to complete the rest of corner (only on acceleration). It seens like the front of car lifts and the front wheels do not respond...
Im going to work with the numbers you gave and will leave feedback later.
Many Thanks.
Chats soon.
- 3,383
- Milky Way, Earth
- danbojte
@Ridox2JZGTE
About the Audi R8 LMS Ultra Phoenix - Max Power Version, I had quite good results with LSD set finaly to 34, 34, 34 - 2:01.xxx, and once 2:00.xxx at Silverstone GP, RH, Camber, ABS 0 (5/4), GT3 Group Series.
Maybe you'll check this. 👍
About the Audi R8 LMS Ultra Phoenix - Max Power Version, I had quite good results with LSD set finaly to 34, 34, 34 - 2:01.xxx, and once 2:00.xxx at Silverstone GP, RH, Camber, ABS 0 (5/4), GT3 Group Series.
Maybe you'll check this. 👍
Last edited:
- 11,660
- GTP_Orido
- 3,383
- Milky Way, Earth
- danbojte
- 11,660
- GTP_Orido
@cbarbosa : I made a base tune for the Viper GT3R Replica, I might post the replica here
I also have the Plain Audi R8 LMS Utlra '12 base tune based on Phoenix Ultra, it has less downforce which requires some changes and further fine tuning
I also made a base tune for Emil Frey Jaguar G3 GT3 replica, the closest I can get for the weight is around 1300kg, much heavier than Blancpain 1200kg
Power wise it has 500HP with plenty of torque, it's slower than the Camaro But I am still going to fine tune the suspension and LSD The paint color is just for fun 
@danbojte : thanks for the schedule, but I am too busy to watch them
I also have the Plain Audi R8 LMS Utlra '12 base tune based on Phoenix Ultra, it has less downforce which requires some changes and further fine tuning
I also made a base tune for Emil Frey Jaguar G3 GT3 replica, the closest I can get for the weight is around 1300kg, much heavier than Blancpain 1200kg
Power wise it has 500HP with plenty of torque, it's slower than the Camaro
But I am still going to fine tune the suspension and LSD The paint color is just for fun @danbojte : thanks for the schedule, but I am too busy to watch them
Pete05
Premium
- 7,093
- Melbourne, Australia
You guys are so spoiled for choice
.All I've got to look forward to this weekend is the F1.
I'd love to know how Webber & the new Porsche go at Silverstone but no TV coverage for us down under
- 3,383
- Milky Way, Earth
- danbojte
I have TV coverage only for F1 & WTCC. For Blancpain events - you can watch them LIVE or, Live and Recorded later on Youtube here.You guys are so spoiled for choice
All I've got to look forward to this weekend is the F1.
I'd love to know how Webber & the new Porsche go at Silverstone but no TV coverage for us down under
👍
- 11,660
- GTP_Orido
SEAT Ibiza Cupra '04 FITT Hot Hatch Version 470PP
Special Build of Seat Ibiza Cupra '04 FITT Tuning Shootout
Sports Hard
Special Build of Seat Ibiza Cupra '04 FITT Tuning Shootout
Sports Hard
CAR : Seat Ibiza Cupra '04
Tire : Sports Hard
Specs
Horsepower: 274 HP at 6500 RPM
Torque: 223.0 ft-lb at 6400 RPM
Power Limiter at : 99.5%
Weight: 992 kg
Ballast : 2 kg
Ballast Position : 50
Weight Distribution : 58 / 42
Performance Points: 470
GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build )
Wheels : Standard Size - Classic Steel Smooth
Car Paint : Matte Pink
Tuning Parts Installed :
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
High RPM Range Turbo Kit
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch Kit
Fully Customizable Dog Clutch Transmission
Weight Reduction Stage 3
Window Weight Reduction
Racing Brakes Kit
Suspension
Front, Rear
Ride Height: 90 90
Spring Rate: 10.00 6.00
Dampers (Compression): 6 4
Dampers (Extension): 7 4
Anti-Roll Bars: 3 4
Camber Angle: 0.2 1.2
Toe Angle: -0.16 0.00
DOG CLUTCH TRANSMISSION
Install all power parts
Set Default
Set Final to 3.450
Set Auto Max Speed to 180kmh / 112mph
Adjust each gear :
1st 3.675
2nd 2.725
3rd 2.200
4th 1.835
5th 1.600
6th 1.400
Set Final Gear : 2.525
LSD - 1 Way
Initial Torque : 15
Acceleration Sensitivity: 30
Braking Sensitivity: 5
Brake Balance:
4/7 ( personal BB) or for ABS 0 wheel : 3/6, for ABS 1 4/7 or feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/7 brake balance as starting point.
Notes :
I chose this Seat as it's rarely tuned and used
It's in Pink with retro wheels so it will easily make other drivers distracted and the job of winning the race easier I used different route for this build, the car was tuned at 450PP originally, for 470PP, I used lightweight approach, with less than 1000kg and maximizing HP within PP limit. I do not use ride height difference in this tune, and I focused on other parts of suspension to improve the car handling balance.
Suspension is stiff, as I felt the car has excessive body roll even with body rigidity improvement. The real Cupra often cited to have excessive body roll even with quite stiff KW V1 coilover kit. I settled for 10k/6k springs, damper and ARB has been tuned for responsive handling with good turn in under trail braking.
For LSD, I used 1 way, with medium preload and high locking rate to ensure maximum traction on low/medium speed exits.
Brake as minimum as possible on medium speed corners, the car can carry lots of speed through some of the corners, never afraid to go faster, just make sure to point at the right direction with good weight transfer
For tight turns, the car can also brake very late, shift down quickly to help with turn in.I tuned and tested at Tsukuba and Brands Hatch GP. The car is not very quick compared to my other Japanese FF cars, a 450PP J's Racing FIT Turbo RS can beat this 470PP Cupra in lap times at Tsukuba ( both on comfort soft ), and my TODA Racing Civic Type R 450PP eats both for breakfast with 1:04s lap on comfort soft.
The Ibiza Cupra can lap Brands Hatch GP on SH tires consistently in low/flat 1:39s. My best was 1:38s with 20.1s 1st sector, low/flat 35s 2nd sector and 1:14s last sector. If you have flat 20s 1st sector and 1:14s last sector, you are doing extremely good
:tup:
- 11,660
- GTP_Orido
Alfa Romeo MiTo 1.4 T Sport '09 FITT Hot Hatch version
Special Build of Alfa Romeo MiTO for FITT Tuning Shootout
Comfort Soft
Special Build of Alfa Romeo MiTO for FITT Tuning Shootout
Comfort Soft
CAR : Alfa Romeo MiTo 1.4 T Sport '09
Tire : Comfort Soft
Specs
Horsepower: 165 HP at 5100 RPM
Torque: 172.3 ft-lb at 5000 RPM
Power Limiter at : 90.0%
Weight: 1050 kg
Ballast : 77 kg
Ballast Position : -27
Weight Distribution : 63 / 37
Performance Points: 402
GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED in this build )
Wheels : +1 Inch Up RAYS TE37SL in Black
Car Paint : GT Old Generation 002 - W ( Seasonal Prize )
Tuning Parts Installed :
Engine Tuning Stage 1
Sports Exhaust
Intake Tuning
Suspension Fully Customizable Kit
Adjustable LSD
Six Speed Transmission
Weight Reduction Stage 3
Suspension - Autodelta Sportsline Corse Coilover Kit based from INTRAX HDA
Front, Rear
Ride Height: 85 85
Spring Rate: 13.25 6.13
Dampers (Compression): 6 7
Dampers (Extension): 6 7
Anti-Roll Bars: 3 3
Camber Angle: 0.2 0.6
Toe Angle: -0.07 0.00
LSD - 2 Way Autodelta Progressive LSD ( 30% max lock )
Initial Torque : 42
Acceleration Sensitivity: 20
Braking Sensitivity: 20
Brake Balance:
7/9 ( personal BB) or for ABS 0 wheel : 7/9, for ABS 1 7/9 or feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/9 brake balance as starting point.
Notes :
This MiTo is build by adapting the parts used on Autodelta 147 GTA
So, in a way it's an AutoDelta MitO.Suspension uses coilover kit adapted from Autodelta 147 GTA Sportsline Corse Coilover Kit, it's stiff but very capable on twisty circuit. Damper and ARB is tuned for stability and nimble handing. No ride height difference in this build.
LSD also used Autodelta 147 GTA, with high preload and progressive low locking ratio for street tire.
I really like driving this car, with about 30 minutes tuning, I spent considerable more time just driving it at Autumn Ring, it's addicting
The car can easily do 1:34s lap, with my best at low/mid 1:33s and the car should be able to do 1:32s, 1st sector should be in 31s with a good run 👍
- 3,383
- Milky Way, Earth
- danbojte
FEED Fujita Engineering Mazda RX7 FD3S Spirit R Type A '02 Hot Version 2007
Tuned to replicate FEED Fujita Engineering Mazda RX7 FD3S 2007
Comfort Soft to Sports Soft
CAR : Mazda RX-7 Spirit R Type A (FD) '02
Tire : Comfort Soft to Sports Soft
Specs
Horsepower: 444HP / 450PS at 7100 RPM
Torque : 390.5 ft-lb at 4400 RPM
Power Limiter at : 93.9%
Weight: 1260 kg
Ballast : 5 kg
Ballast Position : 50
Weight Distribution : 50 / 50
Performance Points: 530
GT AUTO
Oil change
Improve Body Rigidity ( NOT INSTALLED IN THIS BUILD )
Aero Kits Type A
Custom Rear Wing :
Wing Mount Standard Type E
Wing Large Type D
Winglets Large Type C
Height +0 and Width +40
Wheels : Standard Size ADVAN RGII in White
Car Paint : Grayish Green Mica Metallic (from Toyota Supra RZ '97 ) or Titanium Gray Metallic II ( from Mazda MX-5 Miata 1800 RS '04 )
Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Semi Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Low RPM Range Turbo Kit
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Racing Brakes Kit
Carbon Hood
Window Weight Reduction
Suspension - FEED Fujita Engineering PRO-F05 Coilover Damper Kit
Front, Rear
Ride Height: 75 75
Spring Rate: 15.00 15.00
Dampers (Compression): 6 5
Dampers (Extension): 6 6
Anti-Roll Bars: 5 5
Camber Angle: 0.2 0.2 ( use zero camber all around for max grip )
Toe Angle: -0.07 0.00
LSD - FEED Fujita Engineering 2 Way LSD Touge/Winding Road Set
Initial Torque : 22
Acceleration Sensitivity: 24
Braking Sensitivity: 24
DOG CLUTCH TRANSMISSION - Corrected Ratio as in real life with FEED 4.1 Final Gear
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed at 360kmh / 224mph
Adjust each gear :
1st 3.483
2nd 2.015
3rd 1.391
4th 1.000
5th 0.806
6th 0.675 ( IGNORE 6th for authenticity )
Set Final : 4.100
AERO:
REAR : 100
Brake Balance:
4/4 ( personal BB) or for ABS 0 wheel : 4/4, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 5/5 for ABS 1 or 1 click higher at the rear.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/4 brake balance as starting point.
Notes :
I built this replica upon request from a fellow member f1357924680, he asked for a different version of the FEED RX7
So, after research and watching 2007 Hot Version videos of the car in action, I decided to build one.
The FEED Fujita Engineering FD3S produces 450PS using FEED T04RS Turbo Kit. Basically the FEED R7 is a street car with excellent tune ups. Weighing at 1260kg and a perfect balance of 50/50, the RX7 proved it's potential in the hands of Dori Dori.
Suspension comes from FEED PRO-F05 coilover damper kit, with 20kg/20kg spring rate, sadly GT6 do not allow such high value, so the highest I can set on both rear and front is 15/15. Still, with a fine tuned damper and ARB, the car gives exceptional response throughout the corner, with tuning aimed at balance just like Dori Dori often said in his review.
LSD is 2 way from FEED, this time I tuned for touge, which means high preload and medium locking rate. This gives the best balance between agility, traction and flexibility on the limit.
Gearing is stock, I have to correct this according to real life OEM 5 speed ratio, ignore 6th gear if wanted authenticity. The FEED RX7 uses FEED 4.1 Final Gear, which again gives the car rapid acceleration that worked well with the engine power delivery.
I mainly tuned and tested the car at Tsukuba. It easily lap Tsukuba on comfort soft at 1:04s.
ENJOY
Great cars, great sound, SC, Ascari 10 laps, SH, Camber, ABS 0 (4/3), Winner. 👍FEED Fujita Engineering Mazda RX7 FD3S Spirit R Type A '02 500PP
Special Build of FEED Fujita Engineering Mazda RX7 FD3S 500PP
2011 Tsukuba Superlap Battle Champion Street S-Class
Comfort Soft to Sports Soft
CAR : Mazda RX-7 Spirit R Type A (FD) '02
Tire : Comfort Soft to Sports Soft
Specs
Horsepower: 352 HP at 6600 RPM
Torque : 286.7 ft-lb at 5100 RPM
Power Limiter at : 94.3%
Weight: 1150 kg
Ballast : 10 kg
Ballast Position : 50
Weight Distribution : 50 / 50
Performance Points: 500
GT AUTO
Oil change
Improve Body Rigidity ( NOT INSTALLED IN THIS BUILD )
Aero Kits Type A
Custom Rear Wing :
Wing Mount Standard Type E
Wing Large Type D
Winglets Large Type C
Height +0 and Width +40
Wheels : +1 Inch Up ADVAN RGII in White or Silver or Black
Car Paint : Grayish Green Mica Metallic (from Toyota Supra RZ '97 ) or Titanium Gray Metallic II ( from Mazda MX-5 Miata 1800 RS '04 )
Tuning Parts Installed :
Sports Computer
Semi Racing Exhaust
Catalytic Converter Sports
Triple Plate Clutch
Carbon Drive Shaft
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Racing Brakes Kit
Carbon Hood
Weight Reduction Stage 1
Window Weight Reduction
Suspension - FEED Fujita Engineering PRO-F09 Coilover Damper Kit
Front, Rear
Ride Height: 75 75
Spring Rate: 15.00 15.00
Dampers (Compression): 6 5
Dampers (Extension): 6 6
Anti-Roll Bars: 5 5
Camber Angle: 0.2 0.2 ( use zero camber all around for max grip )
Toe Angle: -0.07 0.00
LSD - FEED Fujita Engineering 2 Way LSD Low Locking Rate
Initial Torque : 22
Acceleration Sensitivity: 22
Braking Sensitivity: 22
DOG CLUTCH TRANSMISSION - Corrected Ratio as in real life with custom final
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed at 360kmh / 224mph
Adjust each gear :
1st 3.483
2nd 2.015
3rd 1.391
4th 1.000
5th 0.806
6th 0.675
Set Final : 5.250 ( lower the final for higher speed tracks )
AERO:
REAR : 25 ( adjust to your preference, higher will result in tighter rear end, and slightly lower top speed and acceleration )
Brake Balance:
4/3 ( personal BB) or for ABS 0 wheel : 4/3, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 5/4 for ABS 1 or 1 click higher at the rear.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/3brake balance as starting point.
Notes :
Special build 500PP RX7 Racer based on FEED Fujita Engineering RX7 replica.
I made some changes, removing power parts and lower power to achieve 500PP mark, lighter body at 1150kg, lower rear aero at 25 for better balance of top speed and cornering.
LSD has been tweaked for easier drive and consistency, using low locking rate.
Gearing has been shortened for short to medium speed track, lower the final for more top speed, I recommend 4.700, 4.100 or 3.900.
This tune is very well balanced, able to tackle various corners with ease.
ENJOY
Last edited:
- 11,660
- GTP_Orido
- 1,460
- England
KEI OFFICE S14 Nissan Silvia K's Zenki '93
Tuned to replicate Drift Bible Kei Office S14 - Comfort Medium
CAR : Nissan Silvia S14 K's Aero '93
Tire : Comfort Medium
Specs
Horsepower: 260+ PS at 6200 RPM
Torque: 236.6 ft-lb at 5000 RPM
Power Limiter at : 100%
Weight: 1220 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 55/45 as stock
Performance Points: 440 PP
GT AUTO
Oil Change
Improve Body Rigidity ( Optional ) - there's no bad side effect of this, highly recommended.
Wheels :+1 Inch up - GT-Ab05 in White
Car Paint : White
Tuning Parts Installed :
Sports Computer
Semi Racing Exhaust
Catalytic Converter Sports
Suspension Fully Customizable Kit
Adjustable LSD
LSD - Nismo GT Carbon 1.5 way - low preload, 45 degree cam angle.
Initial Torque : 13
Acceleration Sensitivity: 30
Braking Sensitivity: 5
Suspension Kei-office 2626 Erfolgkei Type XR :
Front, Rear
Ride Height: 90 100
Spring Rate: 9.0 8.0
Dampers (Compression): 4 5
Dampers (Extension): 4 7
Anti-Roll Bars: 3 4
Camber Angle: 1.5 1.0
Toe Angle: 0.00 0.08
Brake Balance :
9/7 ( personal BB) or for ABS 0 wheel : 5/3, for ABS 1 - feel free to use your preferred brake balance.
Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/5 brake balance as starting point.
Notes :
Kei Office S14 Zenki was driven by Dori Dori to demonstrate the basics of drifting, the car was not purpose built for drifting, it was a mild modified street car that can be driven hard at the track - either grip or drift. It was fitted with Yokohama GP M7 tire which is similar to comfort medium. Feel free to use higher grip tire for chasing lap time. For drift, comfort medium is the recommended tire for this tune. The car was tested and tuned at Big Willow and Bathurst. The tune is built to give driver confidence in high speed sweeping corners and agility in tighter turns, it can understeer when pushed too hard due to the fitted street tire, ease off the throttle to get the nose back in
UPDATE 1.04 : Damper changes.
Slapped this setup on my S14.
Absolutely blown away by this.
Took it to streets of willow, spent half an hour just blasting about, getting the back out when I wanted.
Feels like how I imagine the drift bible car to feel. Very chuckable. Lovely replica
More grip than I thought I'd get from comfort mediums 👍
(I did reduce camber to 0.0 for maximum grip)
Only gripe is the gearing is a bit long, but that's not your fault.
- 3,383
- Milky Way, Earth
- danbojte
Not yet, but I will.
Have you tried the Spirra tune ? I am curious if the car is good enough or not
- 4,131
- Lost...
@cbarbosa : I made a base tune for the Viper GT3R Replica, I might post the replica here
View attachment 143571
Hello mate!
First of all, congrats for "GTPlanet Tune of the Week"! 👍
Awesome, im sure it will be another great one... Im still playing with the data I gave you in the PM I sent you, trying to feel the better numbers for the setup by driving the car... I feel im still far form finish it...
Many Thanks.
Chat soon.
PS: The stats you gave me regarding the 458 GT3 replica are working. After some changes based those stats, the car is starting to feel better, a little bit more loose...
Similar threads
