RIDOX Replica Garage-In Memory of TurnLeft-GT40,300ZX,F430,TVR,AEM S2000,Cizeta,TransAm Doug Nash

  • Thread starter Ridox2JZGTE
  • 5,032 comments
  • 909,958 views
Ferrari 599XX EVOLUZIONE 2012 750PS
Real World Setup

Tuned to replicate Ferrari 599XX Evoluzione 2012
Comfort Soft to Racing Hard




CAR : Ferrari 599 '06
Tire : Comfort Soft to Racing Hard

Specs

Horsepower: 740 HP / 750 PS at 7800 RPM
Torque: 518.5 ft-lb at 6100 RPM
Power Limiter at : 96.7%
Weight: 1310 kg
Ballast : 36 kg
Ballast Position : 44
Weight Distribution : 47 / 53 as in real life
Performance Points: 586



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the real Ferrari 599XX Evoluzione has roll cage.
Custom Rear Wing :
Wing Mount Standard Type D
Wing Large Type D
Winglets Type F
Height -2 and Width +14
Wheels : Standard Size BBS LM-R painted in Metallic Dark Grey
Car Paint : Rosso Corsa


Tuning Parts Installed :
Engine Tuning Stage 1
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit

Adjustable LSD
Twin Plate Clutch
Carbon Drive Shaft
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit
Fully Customizable Dog Clutch Transmission ( Optional )



Suspension - Ferrari Custom Tuned Coil Springs with 2nd Gen Delphi SCM-E Magnetorheological Damper
Front, Rear

Ride Height: 75 75
Spring Rate: 16.07 16.07
Dampers (Compression): 6 7
Dampers (Extension): 7 5
Anti-Roll Bars: 5 4
Camber Angle: 2.5 2.0
Toe Angle: 0.00 0.50



LSD - 2 Way 599XX Tuned E-Diff
Initial Torque : 27
Acceleration Sensitivity: 40
Braking Sensitivity: 40


OPTIONAL - DOG CLUTCH TRANSMISSION - Shorter Final to replicate 599XX Top Speed with Optional High Final
Install all power parts
Set Default
Set Auto Max Speed to 370kmh / 230mph
Adjust each gear :
1st 3.150
2nd 2.180
3rd 1.570
4th 1.190
5th 0.940
6th 0.780
Final Gear : 4.980
Optimum Shift Point : 9000 RPM ( as in real life )




Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 4/5 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.



Notes

Still a work in progress, a replica of Ferrari 599XX Evoluzione 2012 with 750PS and 1310kg. I tried to get as close as possible for the torque figure 516ft-lb, the GT6 version replica has close to 519 ft-lb.

The real car - 2010 version with lower power and more weight managed to lap Nordschleife in 6:58.16.

I used stock gearbox in this one for now, suspension and LSD are still being tested. The wing is not accurate, but at least it has a wing. There has been reports of shorter final gear ratio for the 599XX Evo, it was used on Fiorano Test Track lap record of 1:15s.

I have added optional transmission ratio with higher final to replicate real life 599XX top speed 198mph limited by gearing when tested at Fiorano and posted 1:15s lap using higher final.

I tuned and tested this early build at Spa, Brands Hatch GP and Silverstone GP on comfort soft, sports soft and racing hard tires.

ENJOY :cheers:







UPDATE : Added optional custom transmission to replicate real life top speed with higher final, 198mph/318kmh - gear limited.

Recently driven this car at Red Bull Ring on comfort soft to racing hard, much better than in pre 1.09 :) Please try it and let me know if the 599XX needs improvement :)
 
RENNTech Mercedes McLaren SLR 722 GT
"Performance Without Compromise"

Tuned to replicate RENNTech SLR 722 GT
Comfort Soft to Racing Hard





CAR : SLR McLaren '09
Tire : Comfort Soft to Racing Hard


Specs
Horsepower: 670 HP at 6600 RPM
Torque : 610.2 ft-lb at 3300 RPM
Power Limiter at : 98.2%
Weight: 1387 kg
Ballast : 76 kg
Ballast Position : -20
Weight Distribution : 49 / 51 as the real car spec.
Performance Points: 610


GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED ) - MANDATORY - the real SLR 722 GT has racing car preparation, with strengthened chassis.
Aero Kits Type A or OPTIONAL Type B
Other : Part A
Custom Rear Wing :
Wing Mount Standard Type D
Wing Large Type E
Winglets Large Type C
Height +2 and Width +11
Wheels : Standard Size or +1 Inch Up - ENKEI RC-T4 or BBS RE-MG in Black Solid or Matte.
Car Paint : Crystal Laurit Silver or White or Black



Tuning Parts Installed :
Sports Computer
Sports Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Fully Customizable Suspension
Adjustable LSD
Twin Plate Clutch Kit
Carbon Drive Shaft
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction
Racing Brakes Kit



Suspension - RENNTech KW Based Motorsport 3 Way Damper Racing Suspension Package 1200/1500 Track Setup - High Camber
Front, Rear

Ride Height: 90 90
Spring Rate: 21.43 26.79
Dampers (Compression): 8 6
Dampers (Extension): 7 4
Anti-Roll Bars: 3 3
Camber Angle: 3.2 1.5
Toe Angle: -0.16 0.16

Suspension - RENNTech KW Based Motorsport 3 Way Damper Racing Suspension Package 1200/1500 Track Setup - Medium Camber
Front, Rear

Ride Height: 90 90
Spring Rate: 21.43 26.79
Dampers (Compression): 8 6
Dampers (Extension): 7 4
Anti-Roll Bars: 3 3
Camber Angle: 2.7 1.0
Toe Angle: -0.16 0.16

Suspension - RENNTech KW Based Motorsport 3 Way Damper Racing Suspension Package 1200/1500 Track Setup - Low Camber
Front, Rear

Ride Height: 90 90
Spring Rate: 21.43 26.79
Dampers (Compression): 8 6
Dampers (Extension): 7 4
Anti-Roll Bars: 3 3
Camber Angle: 2.2 0.5
Toe Angle: -0.16 0.16




LSD - RENNTech Performance Differential Super Lock 2 Way LSD

Initial Torque : 20
Acceleration Sensitivity: 42
Braking Sensitivity: 48


AERO
Rear : 320 ( MAX )


Brake Balance:
2/4 ( personal BB) or for ABS 0 wheel : 2/2 or 2/3 or 2/4, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 2/4 brake balance as starting point.

Notes :


The Ultimate Mercedes : SLR Mclaren tuned by RENNTech. Their motto : Performance Without Compromise. Each RENNTech SLR are special car tuned with extreme build quality and durability. The limited edition number of cars made sure the status of these cars are among the top echelon of exotics, commanding prices beyond mere mortal can afford. They are built not only for show, but they goes like racing car, street legal racing car to be precise.

Their early release is this SLR 722 GT, packing 670HP and 610ft torque, the SLR received decent power and torque bump, while weight has also been shaved for track purpose. The chassis received transformation in rigidity, with extensive enhancement by replacing many parts with carbon. Weight comes in at 1387kg and distribution at 49/51 based on review.

Suspension fitted by RENNTech is based on KW Suspension, featuring 3 way Racing Damper with matching springs. For spring rate, I decided to use stiff racing spec rate, at 1200 lb/in front and 1500lb/in rear, this is a club racer setup, with damper, ARB and camber tuned for best performance while maintaining good balance and feeling. I have provided 3 camber level setup, my personal choice is high camber :)

The 722 GT uses RENNTech built differential, a mechanical clutch type 2 way LSD with 70% lock on acceleration and 80% lock on coast/overrun. The transition is smooth, possible with optimized initial torque.

Gearing remains stock, but RENNTech has rebuilt the internals with RENNTech 722.6 5 Speed Transmission Upgrade KIT. Stronger clutch has been replicated with twin plate clutch, while the upgrades is reflected with the added carbon drive shaft, giving quicker shift times with better feel like in real life.

For appearance, the optional Aero Kit Type B is the closest to the real car, but the wheel offset is not possible, thus may give unfavorable look to some.

I tuned and tested at Tsukuba, Red Bull Ring, and Silverstone GP, from comfort soft to racing hard, the SLR 722 GT drives exceptionally well, Enjoy :D This one for you @ColinH96, sorry it has been long overdue :lol:





Awesome car! And I no idea that there were other variations as well. From my few minutes with the 'standard' 670 Hp car, I can tell that it handles pretty well, it does have some turn-in understeer, but I get that with almost every car in your garage, so it is just our conflicting driving styles. But it more than makes up for it in corner exit traction and really rockets out of the corners. I only made one little change and that was switching the Sports computor and Sports exhaust for a racing exhaust, it gives the exact same HP and Torque, but a much more 'racey' exhaust note. I don't have much time today, so ill try the others tomorrow. Overall 9/10, Great car.
 
Personally speaking, I love the detailed notes & pics in the one original post. The way the alerts work, it's a lot easier to keep track of & saves having to backtrack through pages.
My advice is don't rush perfection :D

I am with Pete on this Ridox, you are the most in depth tuner on GTP with the detailed notes. I love reading these and it adds a connection between the car, the tuner, the game and us the drivers. I am more than happy to wait (after all I am a GT kinda bloke and heaven knows we know all about that hahahaha) and prefer to get the proper goods Ridox. Make like INXS and don't change a thing Pleeeeeease! :-)
 
Recently driven this car at Red Bull Ring on comfort soft to racing hard, much better than in pre 1.09 Please try it and let me know if the 599XX needs improvement

Will do one, this is of my favorite tunes of yours R, will add to my b tune as all my tunes are c tune so the original is there. Will test both and report back however it may be a few days now 1.12 has arrived and as my ps3 is on life support it only sees night duty when temps are down and humidity has subsided a bit
 
Last edited:
Any ideas to tune Toyota MR2 97 similar to Ferrari F355? 1,350 kg and 375hp was atleast possible without turbos

Have you tried this ?

ZEEK Tuned MR2 GTS '97 BM 400PS

Tuned to replicate BM Super Battle ZEEK MR2 GTS - Comfort Soft


CAR : Toyota SW20 MR2 GTS '97
Tire : Comfort Soft


Specs
Horsepower: 400 PS at 6500 RPM
Torque: 325.0 ft-lb at 6100 RPM
Power Limiter at : 98.2%
Weight: 1270 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 44/56 as stock
Performance Points: 503 PP



GT AUTO
Oil Change
Improve Body Rigidity ( Optional ) - there's no bad side effect of this, highly recommended.
Wheels :Stock
Car Paint : Black


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Sports Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
High RPM Range Turbo Kit
Twin Plate Clutch Kit
Racing Brakes Kit
Suspension Fully Customizable Kit
Adjustable LSD


LSD - TRD Mechanical 2 way -high preload
Initial Torque : 20
Acceleration Sensitivity: 36
Braking Sensitivity: 36


Suspension :
Front, Rear

Ride Height: 82 92
Spring Rate: 6.37 7.14
Dampers (Compression): 5 4
Dampers (Extension): 7 8
Anti-Roll Bars: 6 3
Camber Angle: 0.4 0.3
Toe Angle: -0.04 0.18


Racing Brakes Brake Balance :
7/5 ( personal BB) or for ABS 0 wheel : 4/3, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 5/3 brake balance as starting point.



Notes :
The famous powerful MR2 GTS in the 90's, ZEEK tuned MR2 GTS packs a lot of punch, with 400PS/325 ft lb torque and lean body. The car was raced in Best Motoring Super Battle against Ferrari F40, Lamborghini Diablo, Venturi Challenge 400, RUF BR2, Porsche 964 RSR, Honda NA1 NSX R, and Nissan Skyline BNR32 GTR. I tried my best to replicate power and torque, suspension are the result of over 400km of test and tuning at various tracks ( Tsukuba, Bathurst, Brands Hatch GP, Big Willow ) Tune drives well on comfort soft, higher grip tires should work great.

IMPORTANT :

Never do sudden lift off the throttle in mid corner or entry :) Trail brake on entry with some throttle if the rear unsettled, precision and smooth steering is mandatory with this car. Get the steering, throttle and brake spot on, enjoy great entry, mid corner and exit speed. The car is tuned to glide out slow corner with almost neutral rear, throttle steer smoothly :cheers: With that said, this car requires dedication and practice :D


UPDATE 1.04 : Fixed damper, toe and camber :)
 
Hey just wanted to say that your tunes are great, always fun, maybe not always my cup of tea for driving but they all force me to learn something while driving them that helps make me a better driver, and tuner. :cheers: keep up the great work!
 
Audi R8 GT 2010/2012 Replica

Tuned to replicate Audi R8 GT 2010 and 2012 Model Year
Comfort Soft





CAR : Audi R8 5.2 FSI Quattro '09
Tire : Comfort Soft


Specs - 2010 Model Year
Horsepower: 553 HP / 560 PS at 8300 RPM
Torque : 399.1 ft-lb at 6900 RPM
Power Limiter at : 99.7%
Weight: 1525 kg
Ballast : 94 kg
Ballast Position : 46
Weight Distribution : 43 / 57 as the real car spec.
Performance Points: 554

Specs - 2012 Model Year
Horsepower: 553 HP / 560 PS at 8300 RPM
Torque : 399.1 ft-lb at 6900 RPM
Power Limiter at : 99.7%
Weight: 1600 kg
Ballast : 159 kg
Ballast Position : 30
Weight Distribution : 43 / 57 as the real car spec.
Performance Points: 550


GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED )
Wheels : Standard Size - Stock or Anything you like
Car Paint : Silver or Orange or Black or Blue



Tuning Parts Installed :
Semi Racing Exhaust
Catalytic Converter Sports
Fully Customizable Suspension
Adjustable LSD
Weight Reduction Stage 1
Window Weight Reduction ( ONLY FOR 2010 Model 1525kg )



Suspension - Eibach Springs Factory Adjustable Sports Coilover
10mm Lower Ride Height than Stock R8 and Specialized Audi R8 GT Factory Base Alignment

Front, Rear

Ride Height: 110 110
Spring Rate: 11.22 12.23
Dampers (Compression): 7 7
Dampers (Extension): 6 7
Anti-Roll Bars: 6 3
Camber Angle: 1.5 1.5 ( Front +- 0.16, Rear +- 0.16 )
Toe Angle: 0.16 0.16 ( Front +- 0.33, Rear +- 0.50 )


Suspension - Eibach Springs Factory Adjustable Sports Coilover
10mm Lower Ride Height than Stock R8 and Stock Audi R8 Factory Base Alignment

Front, Rear

Ride Height: 110 110
Spring Rate: 11.22 12.23
Dampers (Compression): 7 7
Dampers (Extension): 6 7
Anti-Roll Bars: 6 3
Camber Angle: 1.0 1.0 ( Front +- 0.16, Rear +- 0.25 )
Toe Angle: 0.16 0.16 ( Front +- 0.33, Rear +- 0.50 )




LSD - Audi Rear 2 Way LSD

Front
Initial Torque : 5
Acceleration Sensitivity: 5
Braking Sensitivity: 5

Rear
Initial Torque : 27
Acceleration Sensitivity: 17
Braking Sensitivity: 28


LSD - OPTIONAL Audi Rear 2 Way and Front 1 Way LSD

Front
Initial Torque : 17
Acceleration Sensitivity: 17
Braking Sensitivity: 5

Rear
Initial Torque : 27
Acceleration Sensitivity: 17
Braking Sensitivity: 28


Brake Balance:
7/7 ( personal BB) or for ABS 0 wheel : 5/5, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/7 brake balance as starting point.

Notes :

The Audi R8 GT is the sportier version of the vanilla R8, with lighter weight and more power, it can be said that the R8 GT is like Superleggera version of the Lamborghini :P

The 1st release model year 2010 Audi R8 GT has 1525kg weight and weight distribution of 43/57, which is quite similar to it's close relative, Lamborghini Gallardo. Install window weight reduction for 2010 weight figure. The 2012 model year grows fatter with 1600kg, this setup do not use the window weight reduction.

The Audi R8 GT uses Eibach Springs, the front spring rate is known at 110N/mm or 628lb/in, ID 70mm and 200mm length based on a report from an owner who took a look at the spring markings, unfortunately no such information available for rear springs. I have to make an estimation on the rear springs by cross referencing Eibach ERS catalogue and decided on 120N/mm or 658lb/in spring. I taken into account the Gallardo stock spring rate ratio :) The chosen spring rate works very well for the car, and I tuned the damper to be firm, precise, yet easy to ride on the edge. The Audi R8 GT features sports manual adjustable coilover system with 10mm lower ride height than stock vanilla R8 as standard from factory. The R8 GT factory alignment also has higher base camber front and back at 1.5, with similar toe alignment as stock R8. I have also provided an optional suspension setup that uses stock R8 alignment values, feel free to try it.

The LSD is 2 way at the rear, similar in arrangement as Lamborghini Gallardo with mechanical locking differential at the rear axle that provides up to 25 percent lockup when accelerating and up to 40 percent on the overrun/coast. I have setup the LSD similarly to the Gallardo SL replica, and it works just as good.
I have no confirmation on the front LSD, the GT6 stock LSD has the front with some locking, so I decided to include an OPTIONAL LSD setup with 25% lock at the front axle ( 1 way ), this ensure good stability from mid corner to exit, good entry and overall tighter feeling.

The rear wing of the real R8 GT can't be replicated as there's no rear wing available in GT6 :(, but the fixed aero values makes that moot, the R8 GT replica has more than enough downforce to make it stays planted at high speed, one of the key differences the Gallardo SL replica :D

I tuned and tested the Audi R8 GT at Tsukuba, Red Bull Ring and Silverstone GP. It's a bit slower than the Gallardo SL at Red Bull Ring, lapping in 1:42s range.



Nice car,but more oversteer - only 0,3 s faster than stock R8 @ Madrid Full

It showed me that GT6 psychics are not perfect - How this 4WD is harder to drive without burning rear tires than some FR ?
 
I am with Pete on this Ridox, you are the most in depth tuner on GTP with the detailed notes. I love reading these and it adds a connection between the car, the tuner, the game and us the drivers. I am more than happy to wait (after all I am a GT kinda bloke and heaven knows we know all about that hahahaha) and prefer to get the proper goods Ridox. Make like INXS and don't change a thing Pleeeeeease! :-)

I'm taking my time, will keep doing the notes and pics :P

Hey just wanted to say that your tunes are great, always fun, maybe not always my cup of tea for driving but they all force me to learn something while driving them that helps make me a better driver, and tuner. :cheers: keep up the great work!

Thank you :)

Nice car,but more oversteer - only 0,3 s faster than stock R8 @ Madrid Full

It showed me that GT6 psychics are not perfect - How this 4WD is harder to drive without burning rear tires than some FR ?

It's a replica, most of the time will be harder to drive than stock GT6 setup that often wrong / unlike real life counterpart. Most of the time power + torque, spring rate, camber and toe, LSD, weight figure and distribution are wrong in GT6, some even include the gearing. The oversteer is correct for R8 GT, I've read articles about the car, even Audi states themselves, the added camber alignment, upgraded suspension was to allow controlled oversteer when all electronic aids disabled. Stock R8 in GT6 do not drive like an R8 at all IMO :P, too many things are wrong, from LSD, weight distribution ( affect handling ), camber and toe alignment ( 0.60 toe stock is not always correct, rarely road cars have 0.60 rear toe in :lol:, some Ferraris like F430 have 0.50 rear toe in from factory, but it was necessity to combat snap oversteer as the rear wheel gain toe out when loaded )

Try the R8 GT replica with 0.60 rear toe in, and you will have more stable rear / less oversteer.


I will also be releasing H&R R8 GT, the H&R suspension kit allows more neutral handling IRL.
 
I'm taking my time, will keep doing the notes and pics :P



Thank you :)



It's a replica, most of the time will be harder to drive than stock GT6 setup that often wrong / unlike real life counterpart. Most of the time power + torque, spring rate, camber and toe, LSD, weight figure and distribution are wrong in GT6, some even include the gearing. The oversteer is correct for R8 GT, I've read articles about the car, even Audi states themselves, the added camber alignment, upgraded suspension was to allow controlled oversteer when all electronic aids disabled. Stock R8 in GT6 do not drive like an R8 at all IMO :P, too many things are wrong, from LSD, weight distribution ( affect handling ), camber and toe alignment ( 0.60 toe stock is not always correct, rarely road cars have 0.60 rear toe in :lol:, some Ferraris like F430 have 0.50 rear toe in from factory, but it was necessity to combat snap oversteer as the rear wheel gain toe out when loaded )

Try the R8 GT replica with 0.60 rear toe in, and you will have more stable rear / less oversteer.


I will also be releasing H&R R8 GT, the H&R suspension kit allows more neutral handling IRL.

I'll have maybe some time between school so I'll check 0.60 camber
 
Hmm I'll take the F40 and drive it for 250 miles at Monza, Sierra and two tracks of your choice. ;)
This will take some time though. :D
 
ABP
Hmm I'll take the F40 and drive it for 250 miles at Monza, Sierra and two tracks of your choice. ;)
This will take some time though. :D

There are 3 version of Ferrari F40 replica, I choose this version

- The Auto Motorsport Mag 1989 version, please use the recently updated suspension setup ( Best Motoring ride height + stock spring ratio and no fuel weight figure + replica LSD 30/36/36 ) Mmmm. the 2 other tracks would be best at Red Bull Ring ( very enjoyable there ) and Suzuka. You are free to use comfort soft or sports tire :D Good Luck and God Speed :cheers:

Ferrari F40 '92 ( Real World Setup version ) EU Market
AUTO Motorsport Mag 1989 Review Version

Special Build Replica with Real World Setup Ferrari F40 '92 EU Market AUTO Motorsport Mag 1989 Review Version
Comfort Soft to Sports Medium




CAR : Ferrari F40 '92
Tire : Comfort Soft to Sports Medium

Specs - No Power Upgrade

Horsepower: 471 HP / 478 PS at 7000 RPM
Torque: 425.2 ft-lb at 4000 RPM
Power Limiter at : 100%
Weight: 1254 kg ( Auto Motorsport tested curb weight with full tank 120L and all fluids )
Ballast : 142 kg
Ballast Position : 16
Weight Distribution : 39.2 / 60.8 as in real life ( curb weight with full tank and all fluids - closer to 38/62 with driver )
Performance Points: 535

Specs - No Power Upgrade - No Fuel Curb Weight
Horsepower: 471 HP / 478 PS at 7000 RPM
Torque: 425.2 ft-lb at 4000 RPM
Power Limiter at : 100%
Weight: 1169 kg ( weight figure without fuel, calculated based on 0.711kg for 1 litre of fuel and 1254kg on 120L full tank )
Ballast : 57 kg
Ballast Position : -13
Weight Distribution : 42 / 58 as in real life ( without fuel )
Performance Points: 540

NO CATS Specs Option 1 ( Isometric Exhaust Manifold + High RPM Range Turbo Kit )
Horsepower: 513 HP / 520 PS at 6800 RPM
Torque: 451.5 ft-lb at 4500 RPM
Power Limiter at : 98.4%
Weight: 1254 kg ( Auto Motorsport tested curb weight with full tank 120L and all fluids )
Ballast : 142 kg
Ballast Position : 16
Weight Distribution : 39.2 / 60.8 as in real life ( curb weight with full tank and all fluids - closer to 38/62 with driver )
Performance Points: 547


NO CATS Specs Option 2 ( Isometric Exhaust Manifold + Intake Tuning )
Horsepower: 513 HP / 520 PS at 7000 RPM
Torque: 468.5 ft-lb at 4000 RPM
Power Limiter at : 98.9%
Weight: 1254 kg ( Auto Motorsport tested curb weight with full tank 120L and all fluids )
Ballast : 142 kg
Ballast Position : 16
Weight Distribution : 39.2 / 60.8 as in real life ( curb weight with full tank and all fluids - closer to 38/62 with driver )
Performance Points: 548


NO CATS Specs Option 1 ( Isometric Exhaust Manifold + High RPM Range Turbo Kit )
No Fuel Weight

Horsepower: 513 HP / 520 PS at 6800 RPM
Torque: 451.5 ft-lb at 4500 RPM
Power Limiter at : 98.4%
Weight: 1169 kg ( weight figure without fuel, calculated based on 0.711kg for 1 litre of fuel and 1254kg on 120L full tank )
Ballast : 57 kg
Ballast Position : -13
Weight Distribution : 42 / 58 as in real life ( without fuel )
Performance Points: 553


NO CATS Specs Option 2 ( Isometric Exhaust Manifold + Intake Tuning )
No Fuel Weight

Horsepower: 513 HP / 520 PS at 7000 RPM
Torque: 468.5 ft-lb at 4000 RPM
Power Limiter at : 98.9%
Weight: 1169 kg ( weight figure without fuel, calculated based on 0.711kg for 1 litre of fuel and 1254kg on 120L full tank )
Ballast : 57 kg
Ballast Position : -13
Weight Distribution : 42 / 58 as in real life ( without fuel )
Performance Points: 554



GT AUTO
NO Oil change
Wheels : Stock
Car Paint : Rosso Corsa



Tuning Parts Installed :
NO Cats replica power :
Optional High RPM Range Turbo Kit + Isometric Exhaust Manifold -- see notes for more details.
Optional Intake Tuning + Isometric Exhaust Manifold -- see notes for more details.

Suspension Fully Customizable Kit
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Weight Reduction Stage 3
Window Weight Reduction



Suspension - Eibach ERS Springs with Street/Track Tuned Damper and Real World Alignment
Front, Rear

Ride Height: 101 101 - standard - Alternate Ride Height F/R : 63 56 ( lowest ), 115 115 ( high ) and 81 101 ( track lowered)
Spring Rate: 8.25 12.00 - Alternate High Speed Track Oriented Spring Rate F/R : 12.00 12.00
Dampers (Compression): 7 7
Dampers (Extension): 7 6
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33



Suspension - Eibach ERS Springs based on stock F40 spring ratio with Street/Track Tuned Damper with
Real World Alignment and Ride Height based on Best Motoring Tsukuba Battle driven by Motoharu Kurosawa

Front, Rear

Ride Height: 81 81 - Best Motoring Battle
Spring Rate: 8.04 11.61 - Based on factory F40 spring rate ratio
Dampers (Compression): 7 7
Dampers (Extension): 7 6
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33

DOG CLUTCH TRANSMISSION - Corrected EU Market AUTO Motorsport Mag 1989 Review Version Ratio Gear Set and Final
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed to 310kmh / 193mph
Adjust each gear :
1st 2.769
2nd 1.722
3rd 1.227
4th 0.963
5th 0.767
Final Gear : 3.620
Optimum Shift Point : 7400-7700 RPM ( as in real life )



LSD -ZF Self Locking LSD with 60% Lock and Medium Preload - AUTO Motorsport Mag 1989 Review Version
Initial Torque : 30
Acceleration Sensitivity: 36
Braking Sensitivity: 36

Alternate LSD Setup for looser handling :

Initial Torque : 27
Acceleration Sensitivity: 36
Braking Sensitivity: 36

or

Initial Torque : 20
Acceleration Sensitivity: 36
Braking Sensitivity: 36


OPTIONAL LSD SETUP F355 Spec :
LSD -ZF Self Locking LSD with 45% Lock and High Preload
Initial Torque : 40
Acceleration Sensitivity: 27
Braking Sensitivity: 27

Alternate LSD Setup for looser handling :

Initial Torque : 37
Acceleration Sensitivity: 27
Braking Sensitivity: 27

or

Initial Torque : 17
Acceleration Sensitivity: 27
Braking Sensitivity: 27



Brake Balance:
7/6 ( personal BB) or for ABS 0 wheel : 6/4, for ABS 1 7/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/6 brake balance as starting point.



Notes :
Ferrari F40, the last great Ferrari IMO, no electronics aids, just pure man and machine :)

This car is one of my most favorite ride in GT5 and GT6, and it's well known for it's inaccuracy in terms of stats and stock setup.

I made this special replica build with the main goal of correcting the mistakes and make it handle more like a Ferrari, whatever that means :P

First of all, there are 2 region market for Ferrari F40, Europe and US. Both has distinctive setup from power, weight to gearing.

The EU market has much lighter dry weight and comes with lift kit/variable ride height suspension system from factory, with lower final gear and slightly different 2nd and 5th gear :)

This replica is a representation of EU F40 with lift kit, EIBACH ERS springs installed and further based on specification from Auto Motorsport Magazine review back in February 1989. There are some differences to the earlier version replica I have built, mainly the weight, gearing and LSD. I have used LSD profile from F355, this time I have the correct data with 60% lock LSD. For gearing, the Auto Motorsport Mag version although uses different values, also achieved the exact speed/accceleration/top speed and rpm /speed figure on each gear as the other 2 version have posted. The other 2 replica earlier gearing was based on Ferrari owner's club and manual reports, while this one is based on magazine review.

The power of EU F40 from dyno reports with cat installed of 471HP / 478PS / 478CV with curb weight as measured and reported by Auto Motorsport Magazine = 1254kg / 2763.81 lbs and 39.2/60.8 weight distribution. This is curb weight with full fluids and full tank of fuel ( 120L ) - without driver. With a driver, the weight distribution will shift closer to 38/62.
Gross Vehicle Weight ( GVW ) as reported is 1430kg ( max operating weight with driver + passenger + cargo).

Some EU F40 do not have cats installed, usually the early years model, these non Cats F40 has been reported to have in excess of 500HP, some even dynoed with close to 520PS or 513HP.

To achieve the power figure of non cats EU F40, I decided to include 2 optional upgrades path, one uses high rpm range turbo kit and exhaust manifold, the other intake tuning and exhaust manifold. The specs are listed above.

For suspension, I have used EIBACH ERS springs at 8.25kg/mm front and 12.0kg/mm rear, maintaining spring ratio for the stock F40 spring rate, as the stock value can't be achieved. Damper setup for street and track, with ARB set for balance. Toe and camber has been setup with real world alignment values, based on F355 alignment which from report share similar alignment with F40 - closest information I can get :)

An alternate spring rate at 12kg/mm front and rear also provided, this is more oriented for high speed cornering and sweepers.

The real Ferrari F40 has ZF Self Locking LSD, based from Auto Motorsport review specs, the rear LSD has 60% lock, I have tuned likewise, with medium preload. The previous replica LSD which uses specs from Ferrari F355 with 45% lock and high preload also listed as optional.

The corrected EU F40 ratios and final based from the Auto Motorsport mag also able to replicate top speed of real F40 at 324kmh/201mph, furthermore, the rolling acceleration time and vehicle speed at 5th gear 1000rpm has been closely replicated - similar to the tested reports from the magazine.

Various test results from Auto Motorsport mag :

60kmh-100kmh in 4th gear rolling acceleration : 6.3s
80kmh-120kmh in 5th gear rolling acceleration : 8.5s
5th Gear speed at 1000 RPM : 43.5kmh

F40 speed on each gear at about 7400-7700rpm optimal shift point :
1st 90kmh
2nd 144kmh
3rd 201kmh
4th 255kmh
5th 321+kmh

Feel free to try it at SSR7 :)

The F40 was extensively tuned/tested at Ascari, Tsukuba, Spa, Bathurst, Nordschleife, SSR7, Apricot Hill, Brands Hatch GP and Willow Springs.

I also managed to replicate the real life lap time of F40 at Tsukuba, done on Best Motoring at 1:03.73. The car easily do 1:02s comfort soft - slightly quicker than the US F40, as it should :D

Another real life at Suzuka record 2:25.27 in real life can easily be replicated. I managed 2:21.175s on 1st lap.


ENJOY :cheers:



Real life vs GT6 Ride Height :

F/R 115mm / 115mm GT6 vs High Setting Lift Kit

View attachment 156919
View attachment 156928

F/R 101mm / 101mm GT6 vs Standard Lowered Setting Lift Kit

View attachment 156921
View attachment 156914

F/R 81mm / 101mm GT6 vs Track Lowered Setting Lift Kit

View attachment 156918
View attachment 156915

View attachment 156931
View attachment 156911

F/R 63mm / 56mm GT6 vs Dropped F40

View attachment 156906
View attachment 156910

AUTO MOTORSPORT Feb '89 Scan
View attachment 168536

UPDATE : Added weight figure without fuel, calculated from 120L full tank with 0.711kg = 1 litre of fuel. Weight without fuel is at 1169kg, very close to 1170kg :) Weight distribution at 42/58 without fuel. I have also added new suspension setup based on stock factory Ferrari F40 spring rate ratio, this is the lowest / closest to stock value possible, this setup has ride height based on Best Motoring F40 Tsukuba Battle as driven by Gan-San aka Motoharu Kurosawa, the F40 won the race :D. Ride height at 81mm / 81mm, visually matched :cheers: The F40 with no fuel and Best Motoring ride height + stock spring rate ratio, managed flat 1:42s at Red Bull Ring on Comfort Soft in 1st lap ( cold tires ) :eek:


I have updated the replica :)
 
Last edited:
Sierra fuel economy:

Realistic driving style (100km/h speed limit): ~5 liter per lap (~18.5 liter/ 100 km)

Racing driving style: ~15 liter per lap (~55.5 liter/ 100 km)


The F40 is really fun at Sierra on Comfort Softs. The track is very fast and the car is somewhat predictable. It takes slow corners nicely and fast corners can be taken in a sort of power slide in a low angle. Countersteer and you are dead!

Braking is look-free until about 150km/h but there are many sharp corners that you approach at 250+km/h. It is however very stable while braking.


That's my summary of my first 170km at Sierra.

I'm using no aids at all and driving in an online lobby with real grip and tyre wear.


Next goal at Sierra is a sub 10-minute lap. That is an average speed of 162km/h! Rain will be used too in my next session. If you got any specific questions, feel free to ask me.
 
ABP
Sierra fuel economy:

Realistic driving style (100km/h speed limit): ~5 liter per lap (~18.5 liter/ 100 km)

Racing driving style: ~15 liter per lap (~55.5 liter/ 100 km)


The F40 is really fun at Sierra on Comfort Softs. The track is very fast and the car is somewhat predictable. It takes slow corners nicely and fast corners can be taken in a sort of power slide in a low angle. Countersteer and you are dead!

Braking is look-free until about 150km/h but there are many sharp corners that you approach at 250+km/h. It is however very stable while braking.


That's my summary of my first 170km at Sierra.

I'm using no aids at all and driving in an online lobby with real grip and tyre wear.


Next goal at Sierra is a sub 10-minute lap. That is an average speed of 162km/h! Rain will be used too in my next session. If you got any specific questions, feel free to ask me.

👍 That's dedicated driving, close to 10 laps ? :eek: Do you use wheel ? I read that the new FFB makes driving a bit dull :scared: Are these true for Logitech wheel ?
 
Not true, Orido. :cheers:

That's a relieve, so wheel user now enjoys better FFB :P

This might be useful :

My experience of what each button does:
- FF Max Torque
this seems to linearly increase the gain on the actual force effects (steering weight while cornering, bumps, rumble strips)
- FF Sensitivity
This seems to add what PC sims call "damping" and "centering spring" combined. Using more than 2-3 of this setting causes oscillation on straights. So it smooths out the effects felt off bumps, gives the wheel some general "weight" to turning the wheel. Note: PC sims would have 3 separate sliders for this (filter, damping, center spring).

For the T500RS I ended up with:
- Max Torque of between 3-5 depending on the car and how much of a work out I wanted. A setting of 4 in a GT3 car was already pretty ferocious. 5 felt like plenty for drifting.
- Sensitivity of between 1-2 depending on whether I wanted a bit of damping. For FF cars the damping just feels odd so 1 was good. For something like a GT3 car it helps to smooth out the bumps so I was using 2.

One tip: don't immediately add FFS if you want heavier wheel weight, first try some fast tight corners, and see how the FFMT setting already generates heavy forces trying to return the wheel to center when such real forces exist. Effectively FFS is how much simulated power-assisted steering you want (1 being most assisted, 10 being least assisted).


ABP
Nah, I am on a DS3 and had some time to kill. :dopey:
Did about 7 laps, that is how long the track is (27km).

I wish I have Sierra :/ Still stuck in 1.09
 
Toyota VITZ F "RS" Turbo 2012 Silk Road RM/A8 450PP

Special Build Vitz "RS" Turbo tuned with Silk Road RM/A8 Kit 450PP

Comfort Soft to Sport Medium


Tsukuba Circuit_154.jpg



CAR : Toyota VITZ F '12
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 244 HP at 7000 RPM
Torque : 184.3 ft-lb at 6600 RPM
Power Limiter at : 100%
Weight: 990 kg
Ballast : 100 kg
Ballast Position : -18
Weight Distribution : 61 / 39 as the real car spec, close to 62/38
Performance Points: 450



GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED )
Wheels : Stock or ENKEI Competition S2 in Matte Pink
Car Paint : Matte Pink

City of Arts and Sciences - Night_4.jpg


Tuning Parts Installed :
Engine Tuning Stage 3
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
High RPM Range Turbo Kit
Fully Customizable Suspension
Adjustable LSD
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Weight Reduction Stage 2
Window Weight Reduction



Suspension -SILK ROAD RM/A8 5/4 Springs with Factory Alignment Range
( 1.75" Front Drop / 2.75" Rear Drop )

Front, Rear

Ride Height: 96 75 ( rear supposed to be 70, not possible, 75 used )
Spring Rate: 5.00 4.00
Dampers (Compression): 7 7
Dampers (Extension): 7 8
Anti-Roll Bars: 4 5
Camber Angle: 0.2 1.0 ( Front Camber 0.17+-0.75, Rear Camber 0.95+-0.75 )
Toe Angle: 0.08 0.24 ( Toe In Front range 0.08+-0.16, Toe In Rear range 0.24+-0.24 )


Suspension -SILK ROAD RM/A8 5/4 Springs with Track/Race Alignment
( 1.75" Front Drop / 2.75" Rear Drop )

Front, Rear

Ride Height: 96 75 ( rear supposed to be 70, not possible, 75 used )
Spring Rate: 5.00 4.00
Dampers (Compression): 7 7
Dampers (Extension): 7 8
Anti-Roll Bars: 4 5
Camber Angle: 0.2 1.0
Toe Angle: 0.00 -0.40 ( HKS Track Test Alignment )



DOG CLUTCH TRANSMISSION - Toyota VITZ RS Manual 5 Speed + Final Swap
Install all power parts
Set Default
Set Final to 4.312
Set Auto Max Speed at 220kmh / 137mph
Adjust each gear :
1st 3.166
2nd 1.904
3rd 1.392
4th 1.031
5th 0.815
Set Final : 4.312


City of Arts and Sciences - Night_5.jpg


LSD - 1 Way TRD Helical LSD

Initial Torque : 17
Acceleration Sensitivity: 20
Braking Sensitivity: 5


Brake Balance:
7/9 ( personal BB) or for ABS 0 wheel : 5/7, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/9 brake balance as starting point.

Notes :



This is one of rarest FF tuned in GT6 :)

For this build, I used Silk Road RM/A8 coilover damper kit with 5kg/4kg spring package. Toyota VITZ factory alignment range has also been implemented. The coilover allows nice drop at 1 3/4" front and 2 3/4" rear, this gives nice stance and visually level appearance.

LSD uses TRD Helical Type 1 Way. I retained stock weight and distribution, but I fine tuned the balance via weight reduction and ballast to achieve closer to 62/38 of the real car. With only rear seats removal and spare tire in real life, weight shifted forward to 63/37.

As the real car and in GT6 is equipped with 175 wide tire and 14 inch diameter, comfort soft will struggle for traction with the amount of power and torque on 450PP, thus sports hard is highly recommended.

Gearing has been changed from CCVT to 5 Speed Manual, taken from Toyota VITZ RS Manual Ratio. The gearing is well balanced with enough top speed for medium speed track.

The VITZ F 450PP was tuned and tested at Red Bull Ring Short, Tsukuba, Nurburgring GP/D and Big Willlow. At Tsukuba, it can lap easy 1:06s on CS tire, not bad for a VITZ :) Not as quick as my J's Racing Honda FIT RS Turbo as the VITZ retains stock ratio 5 Speed :P




UPDATE : Added race alignment setup and some fixes to the toe values.


City of Arts and Sciences - Night_6.jpg
 
Last edited:
Paul Cain BMW 3002 TTii Replica

Tuned to replicate Paul Cain BMW 3002 TTii

Comfort Soft to Sport Medium


397222_329204613773483_1630052238_n.jpg



CAR : BMW 2002 Turbo '73
Tire : Comfort Soft to Sports Medium


Specs - BMW 330i 2001 3.0i M54B30 DUAL VANOS Engine with Twin KKK Turbo
Horsepower: 372 HP at 6700 RPM
Torque : 320.8 ft-lb at 5500 RPM
Power Limiter at : 97.1%
Weight: 1220 kg ( empty fuel + fluids ) or 1243kg ( full tank )
Ballast : 140 kg or 163kg
Ballast Position : -4 ( 50.2% / 49.8% reflected in ballast position )
OPTIONAL Ballast Position : 2 ( for distribution without driver and empty tank )
Weight Distribution : 50 / 50 as the real car spec with driver and full tank ( 50.2% / 49.8% )
OPTIONAL Weight Distribution : 49/51 real car spec without driver and empty tank ( About 0.5% weight shifted rearward )
Performance Points: 483

Specs - BMW 330i 2001 3.0i M54B30 DUAL VANOS Engine with Twin KKK Turbo 450PP Version
Horsepower: 290 HP at 6000 RPM
Torque : 272.7 ft-lb at 5000 RPM
Power Limiter at : 96.4%
Weight: 1220 kg ( empty fuel ) or 1243kg ( full tank )
Ballast : 140 kg or 163kg
Ballast Position : -4 ( 50.2% / 49.8% reflected in ballast position )
OPTIONAL Ballast Position : 2 ( for distribution without driver and empty tank )
Weight Distribution : 50 / 50 as the real car spec with driver and full tank ( 50.2% / 49.8% )
OPTIONAL Weight Distribution : 49/51 real car spec without driver and empty tank ( About 0.5% weight shifted rearward )
Performance Points: 450



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED ) -MANDATORY- the real car has heavily modified chassis and roll cage.
Wheels : +2 Inch UP BBS-RS in Silver Metallic / Silver Chrome
Car Paint : Nurburgring Blue Metallic from Honda S2000 Type V


401891_329206937106584_1101363390_n.jpg


Tuning Parts Installed :
Engine Tuning Stage 3
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
High RPM Range Turbo Kit ( REMOVE for 450PP Version )
Fully Customizable Suspension
Adjustable LSD
Twin Plate Clutch
Carbon Drive Shaft
Fully Customizable Dog Clutch Transmission




Suspension - JEFF IRELAND Tuned Coilover with EIBACH Springs/Bilstein Damper and Custom Track Alignment
Front, Rear

Ride Height: 107 127 ( visually replicate the real car stance/height )
Spring Rate: 7.14 5.00
Dampers (Compression): 4 7
Dampers (Extension): 3 7
Anti-Roll Bars: 5 2
Camber Angle: 2.0 1.0
Toe Angle: -0.09 0.18


DOG CLUTCH TRANSMISSION - BMW E30 M3 265 GETRAG 5 Speed + BMW E34 M5 Final Drive
Install all power parts
Set Default
Set Auto Max Speed at 300kmh / 186mph
Adjust each gear :
1st 3.380
2nd 2.200
3rd 1.400
4th 1.000
5th 0.810
Set Final :3.710

Alternate Method :
Install all power parts
Set Default
Set Final To 4.530
Set Auto Max Speed at 220 kmh / 137mph
Adjust each gear :
1st 3.380
2nd 2.200
3rd 1.400
4th 1.000
5th 0.810
Set Final :3.710


bmw3002badge.jpg


LSD - BMW E34 M5 Quaife Torque Sensing 1.5 Way LSD

Initial Torque : 17
Acceleration Sensitivity: 24
Braking Sensitivity: 13


Brake Balance:
6/8 ( personal BB) or for ABS 0 wheel : 5/7, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/9 brake balance as starting point.

Notes :

This is one of the most challenging replica I ever made, even at the moment of posting, I'm still not satisfied with the handling :P

The car is based on Paul Cain built BMW 3002 TTii, a 2002 Turbo undergoing modern transformation.

First, the engine was swapped for bigger size with more power, more efficient, lighter and more advanced in technology. A Dual VANOS 6 Cylinder M54B30 engine from BMW 330i 2001 model. To make more power, yes, Mr Paul Cain craved for more power to humiliate the poor folks who look down on the old banger at the lights. He added 2 KKK turbocharger, a TT package that runs on mild boost of 6-8 Psi, but capable of producing 335HP at the wheel - that translate to 370+HP at the crank with 10% loss on the driveline :eek: He reckons that with lower compression, upgraded pistons, the M54 engine will spit out close to 485HP, possibly at the crank with 12 Psi boost :bowdown:

To accommodate that much power, the chassis, driveline and suspension needs some serious make over. The BMW received extensive weigh saving, chassis strengthening, custom wheel hubs, custom suspension linkages, custom sub frames, and special custom roll cage for safety and added rigidity. The real car wet weight ( no driver + full fluid ) at 2740lb / 1243kg. The BMW 3002 TTii has 8 US gallons fuel tank positioned at the rear axle ( half of original tank ), I have calculated weight at 1220kg without fuel and fluids. I also have included a variety of ballast + position. The car with driver and full fluids ( fuel and oil ) has 50.2% / 49.8% distribution, this is reflected in the ballast position of -4. Without driver, 1220kg, the distribution should shift rear ward at about 0.5%, reflected in ballast position of 2 ( 49/51 ).

The suspension is custom built by Jeff Ireland, employing Eibach Race Springs and custom valved Bilstein Damper all around. The spring rate is unknown, so I have to give my personal touch, with handling aimed at good balance, the real car is said to have almost no understeer / neutral turn in at low to medium speed. Ride height has also been visually replicated, with lower front to achieve level appearance like the real car.
I have tuned the damper and ARB to maintain balance on low speed, while medium speed needs good throttle control, while the real car has good handling even at higher speed. This is hard to achieve consistently, as the BMW 2002 Turbo in GT6 has stock skinny tires, while the real car has much wider 17" 7.5" wide front and 8.5" rear tires ( Michelin Pilot Sport ). Nevertheless, the replica should handle well on comfort soft with good throttle control :)

The transmission is another part that needs serious attention, a 5 speed Getrag 265 from E30 BMW M3 is used, with final drive at 3.710 taken from E34 BMW M5. The gearing is perfectly matched to the car engine, giving good acceleration and decent top speed. I have included 2 methods to achieve the ratio, both gives the same result, feel free to try them both and pick one that you prefer.

The LSD is torque sensing Quaife 1.5 way with 25% lock on preload taken from E34 BMW M5. The LSD is tuned to give stability on low to medium speed.

I have also provided a 450PP power figure spec, simply remove the high rpm turbo kit and adjust power limiter accordingly. I also highly recommend to fit sports hard or sports medium if you have hard time with throttle control.

The BMW 3002 TTii was tuned and tested at Tsukuba, Silverstone GP, Red Bull Ring, and SSR7 :P At Silverstone GP, with Comfort Soft tires, stock 4 speed, 370+HP, 1220kg, -4 ballast, it managed 2:30s :eek: A good time for such an old vintage car. I have included the replay for your enjoyment and reference, witness how smooth the BMW 3002 TTii carving the track :D something about old vintage look graciously eating up corners that never gets old.







tumblr_m9s9i2Y9D61qh3t6o.jpg
tumblr_lwmf0pt4sL1qh3t6o.jpg

tumblr_lwmf1q8n0x1qh3t6o.jpg
tumblr_lwmf7ahl8C1qh3t6o.jpg


tumblr_lwmf57KQsz1qh3t6o.jpg
 

Attachments

  • BMW3002TT2m30sSilverstoneGPCS.zip
    495.8 KB · Views: 22
Last edited:
FORD Focus ST 2013 Replica

Tuned to replicate Focus ST 2013

Comfort Medium


Mazda Raceway Laguna Seca_11.jpg



CAR : Ford Focus ST '13
Tire : Comfort Medium


Specs
Horsepower: 252 HP at 5300 RPM
Torque : 267.8 ft-lb at 2500 RPM
Power Limiter at : 92.5%
Weight: 1462 kg
Ballast : 191 kg
Ballast Position : -50
Weight Distribution : 60 / 40 as the real car spec when tested.
Performance Points: 431


GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED )
Wheels : Stock
Car Paint : White or Orange or Blue


Mazda Raceway Laguna Seca_16.jpg


Tuning Parts Installed :
Intake Tuning
Fully Customizable Suspension
Adjustable LSD
Fully Customizable Dog Clutch Transmission
Weight Reduction Stage 2


Suspension - Ford Factory ST Tuned Springs Ratio + Damper with
ST Tuned Street/Track Alignment Range

Front, Rear

Ride Height: 120 120
Spring Rate: 4.77 5.11
Dampers (Compression): 5 4
Dampers (Extension): 6 8
Anti-Roll Bars: 4 3
Camber Angle: 1.3 2.0 ( Front camber : -1.30 +- 0.30, Rear Camber : -2.00+-0.00 )
Toe Angle: 0.10 0.16 ( Front Toe In : 0.10 +- 0.15, Rear Toe In : 0.16 +- 0.56 )

OPTIONAL Factory Street Alignment :
Front
Camber ( Driver Side ) : -0.83 +- 0.75
Camber ( Passenger Side ) : -0.93 +- 0.75
Total Toe In : 0.20 +- 0.20

Rear
Camber : -1.35 +- 0.75
Total Toe In : 0.38 +- 0.20


DOG CLUTCH TRANSMISSION - Corrected Stock GETRAG MMT6 Dual Output Shaft Ratio with 4.063 Final
Install all power parts
Set Default
Set Auto Max Speed at 280kmh / 174mph
Adjust each gear :
1st 3.231
2nd 1.952
3rd 1.321
4th 1.029
5th 0.821 - Actual Ratio : 1.129 with 2nd final drive 2.955
6th 0.685 - Actual Ratio : 0.943 with 2nd final drive 2.955
Set Final :4.063



Mazda Raceway Laguna Seca_13.jpg


LSD - Traction Control Based Front Brake and Torque Vectoring Electronic LSD

Initial Torque : 15
Acceleration Sensitivity: 23
Braking Sensitivity: 5

OPTIONAL 2014 LSD ( Low Lock ) :
Initial Torque : 5
Acceleration Sensitivity: 15
Braking Sensitivity: 5


Brake Balance:
7/10 ( personal BB) or for ABS 0 wheel : 5/8, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/10 brake balance as starting point.

Notes :

The Ford Focus ST 2013 is one of the car in GT6 that is a stat disaster :lol:, wrong weight distribution, torque figure, spring rate too high and broken gearing.

For this replica, I made a corrected version, not really perfect, but as close as possible replicating the real car.

The Ford Focus ST 2013 has 270lb-ft torque, while in GT6 stock value is too low, I have installed intake tuning to get closer at 267.8ft-lb. Power limiter used to get 252HP stock value. Now, onto the weight distribution, the real car has 60/40 distribution, GT6 once again wrong, so I installed weight reduction stage 2 and put some ballast at -50 to get the proper distribution. Curb weight officially at 3223lbs / 1462kg.

For suspension, the stock spring rate is too high in GT6, and the real life stock value can't be reached ( not low enough on GT6 ). I chose to use the spring ratio instead and set the lowest possible spring rate on GT6.
The real car has 30N/mm or 171lb/in spring rate at the front and 32N/mm or 183lb/in spring rate at the rear, based on Ford Official documentation, but when tested by well respected suspension company, the actual rates are =

Front : 29N/mm or 166lb/in
Rear : 31N/mm or 177lb/in

Slightly lower than official stats.

For GT6, I used 4.77kg/mm or 267lb/in spring rate at the front and 5.11kg/mm or 286lb/in spring rate at the rear. This retains stock spring rate ratio, and I have tuned the damper and ARB to maintain balance similar to real life review, nimble with surgical precision while still can bite back on the limit.

I have also used Ford factory alignment ( camber and toe ), the alignment value used is recommended value by ST experts, while for daily driving factory alignment range are as below ( OPTIONAL ) :

Front
Camber ( Driver Side ) : -0.83 +- 0.75
Camber ( Passenger Side ) : -0.93 +- 0.75
Total Toe In : 0.20 +- 0.20

Rear
Camber : -1.35 +- 0.75
Total Toe In : 0.38 +- 0.20

The overall range of values are similar, but the one used on this replica offers better performance at the track.

Gearbox is another one that needs fixing, the real car uses Getrag MMT6 with dual output shaft which result in 2 different final drive, 4.063 final drive for the 1st to 4th gear, while 5th and 6th uses 2.955.
GT6 incorrectly set the 5th and 6th, which result on overly long gearing and useless. I have set the 5th and 6th with calculated effective ratio when 4.063 is used instead, this will replicate real life vehicle speed at max engine speed on all gears from 1st to 6th.

For LSD, I have setup in conjunction with brake balance to achieve similar effect to real life electronic based LSD and torque vectoring as well as cornering understeer control. I have use low preload and medium lock rate to give some locking action which reduce inside wheel spin and give some stability on mid corner, while the rear bias brake balance will help to give illusion of brake based system at the rear axle.

The real Focus ST uses several electronic system in synergy to maintain handling balance under heavy cornering, there's no mechanical parts that acts like limited slip differential. First is the brake based LSD, which relies on traction control system to maintain traction by applying brake pressure on each front wheel to reduce understeer. The Enhanced Torque Vectoring Control and Cornering Understeer Control work hand in hand on both front and rear axle to maintain balance, encourage oversteer, apply inside and outside brake pressure according situation. With trail braking, the Focus ST can be easily shifted to oversteer on entry, up to certain degree. When the car is really pushed hard at track pace, the brake based system is proven not really reliable, often resulting in overheated brake after several hot laps. When this happens, heavy understeer will slowly creep in which will show the Focus ST true colors.

Here is a quote from Randy Pobst on his experience at hot lapping the Focus ST at Laguna Seca MotorTrend Best Driver's Car 2013 :


The hot-shoe's take: "It was enjoyable while it was drifting, but once something changed when everything got good and heated up, it became just an understeerer and it lost that terrific entry rotation that it had originally."

Several tests review also shown that after several laps, the Focus ST tend to lose it's charm and starts to understeer as the braking performance reduced due to heat build up in the system.

I mainly tested the car at Tsukuba, Big Willow and Laguna Seca. At Laguna Seca, it can easily lap in 1:48s on comfort medium. The Best Driver's Car lap record is 1:49.30, driven by Pro Driver Randy Pobst ( MotorTrend )



Below I also provided a picture with detailed gearing and speed stat for the Getrag MMT6 on the Focus ST 2013, and a replay of the run at Laguna Seca for comparison to Randy Pobst lap :P

Watch it, to find out the similarity and difference in cornering as well as speed at braking points. Drive the Focus ST replica at Big Willow and Laguna Seca and hopefully you'll find pleasure like I do.



2013FordFocusTransmissionspecs.png



UPDATE : Added optional LSD with low lock to better reflect non mechanical LSD of the real car.
 

Attachments

  • FordFocusST131m48sLagunaSecaCM.zip
    388.7 KB · Views: 16
Last edited:
Toyota YARIS RS Turbo '02 TRD Street Pack 400PP

Special Build Yaris RS Turbo tuned with TRD S Pack 400PP

Comfort Medium to Sports Medium


list_vitz-f.jpg



CAR : Toyota Yaris RS Turbo (J) '02
Tire : Comfort Medium to Sports Medium


Specs
Horsepower: 158 HP at 5800 RPM
Torque : 160.4 ft-lb at 4400 RPM
Power Limiter at : 96.2%
Weight: 910 kg
Ballast : 14 kg
Ballast Position : -50
Weight Distribution : 61 / 39 as the real car spec, close to 62/38
Performance Points: 400



GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED )
Wheels : Stock or +1 Inch Up BOYD Coddington Wheels LEGACY F-09 in Bronze
Car Paint :Red



Tuning Parts Installed :
Semi Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Fully Customizable Suspension
Adjustable LSD
Twin Plate Clutch
Fully Customizable Dog Clutch Transmission
Weight Reduction Stage 1
Carbon Hood ( Body Color )
Window Weight Reduction



Suspension - TRD S Package Coilover Fixed Damper Rate with Factory Alignment
Front, Rear

Ride Height: 100 100
Spring Rate: 2.40 2.79
Dampers (Compression): 4 2
Dampers (Extension): 10 5
Anti-Roll Bars: 3 6
Camber Angle: 0.9 1.8 ( Front Camber 0.17+-0.75, Rear Camber 0.95+-0.75 )
Toe Angle: 0.37 0.00 ( Toe In Front : 0.15+-0.22, Toe In Rear : 0.28+-0.33 )


LSD - 1 Way TRD Helical LSD

Initial Torque : 17
Acceleration Sensitivity: 20
Braking Sensitivity: 5


Brake Balance:
7/10 ( personal BB) or for ABS 0 wheel : 5/8, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/10 brake balance as starting point.

Notes :

The Yaris RS Turbo in this build is a mild modified setup at 400PP, utilizing TRD parts.
Weight distribution at 61/39 with some weight saving employed.

Suspension is based on TRD Street Pack Coilover with Fixed Rate Damper, the spring rate are quite soft but gives good natural balance, with stiffer roll bar to reduce body roll under extreme load.

LSD is based on TRD 1 Way Helical LSD, this ensure good stability and traction even at tight turns.

Gearing remains stock as I felt for the power and speed, the gear ratio spread is quite good with decent top speed. The Yaris RS Turbo TRD is best suited to low to medium speed track.

I tuned and tested at Tsukuba, Red Bull Ring Short, Nurburgring GP/D and Autumn Ring. At Tsukuba, with CM tire, the 400 PP Yaris RS Turbo can easily lap in 1:10s.






 
Last edited:
Mmm, interesting, haven't tried to tune it to full power, long header + no cats = 1100HP IRL :P Let's see if I can find more info.
I tried that a couple of months ago, The GT500 in game goes to 1015 HP. Unfortunately Shelby keeps their cards close to their chest so there is no info on the suspension. So i just multiplied both spring rates by 1.5. It does handle pretty well, but is very 'lively' on SH, which i think are pretty close to the road tires.
 
I tried that a couple of months ago, The GT500 in game goes to 1015 HP. Unfortunately Shelby keeps their cards close to their chest so there is no info on the suspension. So i just multiplied both spring rates by 1.5. It does handle pretty well, but is very 'lively' on SH, which i think are pretty close to the road tires.

The Shelby GT500 springs are very soft and not reachable in GT6 :grumpy: There's only one spring set that can be used, and it's an aftermarket springs by the same brand as Shelby used on their cars :P I'm guessing the Shelby 1000 will use similar springs, too stiff on live rear axle is bad IRL :D If the suspension on my replica can handle Super Snake on CS tire, it should handle 1000HP, besides the Super Snake has much higher torque spec if going by real life torque figure.

The real question is can the torque figure be replicated ? I doubt the GT500 can reach 1000HP with lower torque than 850HP Super Snake :(
 
Last edited:
The Shelby GT500 springs are very soft and not reachable in GT6 :grumpy: There's only one spring set that can be used, and it's an aftermarket springs by the same brand as Shelby used on their cars :P I'm guessing the Shelby 1000 will use similar springs, too stiff on live rear axle is bad IRL :D If the suspension on my replica can handle Super Snake on CS tire, it should handle 1000HP, besides the Super Snake has much higher torque spec if going by real life torque figure.

The real question is can the torque figure be replicated ? I doubt the GT500 can reach 1000HP with lower torque than 850HP Super Snake :(
At 1000HP, it has 922Lb-Ft, and i am using the normal Gt500's weight at 1747kg (@55/45) because I could not find any info on weight.

Edit: I also found a dark blue that gives black stripes, it is Interlagos Blau Metallic, from the BMW Z4 M Coupe '08. It is not an exact match but i think the black stripes make up for the difference.
 
Last edited:
At 1000HP, it has 922Lb-Ft, and i am using the normal Gt500's weight at 1747kg (@55/45) because I could not find any info on weight.

Shelby documentation has 2014 GT500 and presumably Super Snake at 3845lbs - Super Snake has more lightweight parts to compensate for added weight from additional coolers, structural rigidity enhancement, power upgrade parts etc. Road test review by Road and Track says 3852lbs. Weight distribution is at 57/43 based on Shelby documentation, the Super Snake will be much closer to 58/42 with more parts added at the front ( coolers, bigger supercharger etc )

The Shelby 1000 only have 750lb-ft torque :) I also came across magazine article that states most Shelby Super Snake and 1000 weighs about 4000lbs - may include full tank of fuel :P Shelby 1000 uses specialized coilover kit with camber plates and adjustable dampers.

Found conflicting torque figure :( Some says 852lb-ft :/
 
Last edited:
Back