Spyker C8 Preliator 2016

1,115
Uruguay
Rivera
Tsukishima-TDUDT
9cvI3R5.png
Spyker C8 Preliator '16
9cvI3R5.png

Spyker-1.JPG


The name “Preliator” means fighter or warrior in Latin, so it’s no surprise Spyker chose that name for its new C8. At the unveiling in Geneva, Victor R. Muller, Spyker’s Founder and CEO, said, “The greatest man in our industry, Enzo Ferrari Ferrari , once said: ‘What’s behind you, doesn’t matter.’ What does matter is the fact that we have returned to Geneva today to unveil the worthy successor to the Spyker C8 Aileron, launched right here in 2009, of which the last five units are being assembled in our new production facilities in Coventry, the United Kingdom.”

Exterior

At first glance, it’s easy to tell that this model is a Spyker C8, but it looks like more of a facelift than a new generation. Up front, the Preliator has the same large oval grille, but it now features a vertical louver right in the middle with a Spyker badge positioned to one side. The headlights take the same shape as those on the old C8, as does the hood. The hood, however, now has large, wide-open vents as opposed to the smaller, staggered vents on the Aileron’s hood. To the corners of the front fascia, thin, vertical vents make way for LED running lights. A thin front spoiler is positioned below the front fascia, with upswept wings where the spoiler meets the front wheel arches.

To the sides, there is definitely a change in profile between the Aileron and the Preliator. That lower body line that separates the doors and rear quarters from the tall side skirts still runs between the two wheel arches, but down below, a small wing has been added at the front of the rear wheel arch. The round vents behind the door have been replaced with more aerodynamic rectangular units that sit vertically. Cutouts in the body make it look like the body fades away into the vent – it’s a nice touch, really. The rear quarters are exceptionally dominating on the Preliator. That sweeping body line from the side view mirrors swoops downward on the doors before swooping up and over the rear quarters to help form those muscular rear haunches.

To the rear, the rear lid is flat, with an LED light strip running the full width of the rear end. The LED tail lamps are created out of stainless steel, and feature bright LED rings around the outside, with LED lighting on the inside to simulate something similar to the appearance of a jet turbine. A large mesh insert surrounds the taillights. Down below, a large rear diffuser provides some functional vents and makes way for dual oval exhaust outlets with a large “C8 Preliator” badge between them. Even the roof scoop on the Preliator has been replaced with a flatter, more aerodynamic scoop. Altogether, it’s not a bad package, but this is what the C8 should have looked like from the beginning.

Interior

Inside, you’ll find all of the smooth and unique details you would expect in a hand-built machine. The car on display in Geneva features Saddle interior with white honeycomb stitching and an ivory leather headlining. At the time of purchase, consumers can choose between 14 standard colors, but Spyker will provide any color requested by its customers as an option. The dash has been redesigned compared to the Aileron. There are still two round gauges ahead of the steering wheel, but the display screen in the middle is now gone. There are several small, circular lights between the two gauges. The forward section of the dash is done in what looks like smooth stainless steel.

The center console looks quite similar to that of the Aileron, with four circular gauges on top, a number of switches below them, two HVAC vents, and three more circular gauges – clearly simulating that of an airplane cockpit. And, let’s not forget about that weird joystick-like shifter that runs from the front of the center console to the rear of the vehicle.

The Preliator comes with a heads-up display that also functions as a navigation system. Since the demand for a sound system has increased, every Preliator comes with a high-end sound system with digital radio, Bluetooth interface, and Apple iPhone connectivity.

Drivetrain

The C8 Preliator is powered by Audi’s 4.2-liter V-8, but it’s been supercharged and now delivers 517 horsepower and 443 pound-feet of torque. The engine is mated to a Getrag, six-speed manual transmission with gear ratios that are matched to the engine. A ZF six-speed automatic with paddle shifters is an option, and like the Getrag, it has Spyker’s trademark exposed gear change mechanism. All told, the C8 Preliator can hit the 62 mph sprint in 3.7 seconds and has a top speed of 201 mph. Not too bad, if I say so myself.

The C8 Preliator is equipped with independent double-wishbone suspension from Lotus in the front and rear. The system includes front and rear stabilizer bars, mono-tube dampers, coilover steel springs, and anti-dive/anti-squat setup for improved handling and agility. When possible, the suspension was made with forged aluminum to help fight unsprung weight. The 19-inch, Turbofan wheels are wrapped in 235/35 series tires in the front and 295/25 series tires in the rear. Needless to say, Spyker went out of its way to make sure the C8 Preliator stays on the ground despite, its aviation-based design cues.

Text by Robert Moore

Specs:
Spyker C8 Preliator '16 specs.png


1882810655746272219.jpg

12559506991334078322.jpg

13095979071354129726.jpg

000 (3).jpg


000.jpg

000 (1).jpg

000 (2).jpg
 
Last edited:
9cvI3R5.png
Spyker C8 Preliator '16
9cvI3R5.png

View attachment 520509

Dutch specialty marque Spyker has risen from its own ashes for this year’s Geneva show where the company has on display the C8 Preliator. Acting as a successor for the C8 Aileron, the new model has received an evolutionary design and comes with NACA ducts as seen in the aviation industry. Spyker has removed the shark-like gills to create a cleaner appearance while the grille has a honeycomb mesh and a central pillar in the same vein as the 2013 B6 Venator concept.

Spyker worked on the rear diffuser to boost its aerodynamic efficiency that has also been enhanced by the small winglets mounted on the side skirts and front splitter. The back of the car hosts CNC-machined stainless steel LED taillights and these light-emitting diodes are also found in all of the other lighting clusters.

Featuring an all-aluminum space frame chassis, the C8 Preliator is powered by an Audi-sourced supercharged 4.2-liter V8 engine that now develops 525 horsepower (386 kilowatts) and 443 pound-feet (600 newton meters) of torque. As standard, the engine will be linked to a Getrag six-speed manual gearbox while an optional ZF six-speed automatic transmission will be available as well.

In terms of performances, Spyker says its new model needs a mere 3.7 seconds until 62 mph (100 kph) and will be able to hit 201 mph (322 kph.) To stop efficiently those 19-inch Turbofan wheels, the C8 Preliator has received AP Racing brakes with four-piston calipers while carbon ceramic brakes will cost extra.

Spyker has plans to make only 50 units at a pre-tax starting price of €324,900 for the manual model and from €330,990 if you go for the automatic. Customers will be able to choose from 16 body paints, including the pictured Satin Jet Grey along with the more special Spyker Squadron GT2 scheme.

Text by Adrian Padeanu

View attachment 520506
View attachment 520507
View attachment 520508
Looks nice! You have my vote on this one :)
 
Don't get me wrong on this one, i love Spyker!
But wouldn't hurt if we see a completely new model...

That "Spoiler:More Pictures" got me so bad.:lol:
 
Back