Suggestion on setting my EvoVI

[DarkEvoMaster]

Setting

| FRONT | REAR
spring rate: 15.2kgf/mm | 13.8kgf/mm
Ride Height: 98mm | 100mm
ShockBound: level 8 | level 8
ShockRebound: level 5 | level 5
camber angle: NONE
Toe angle: NONE
stabilizers: level 1 | level 1

brake balance: level 12 | level 12

Limited-slip
Initial Torque: 60 | 0
Acceleration: 60 | 0
Deceleration : 32 | 0

DownForce: 0.19 | 0.26

Gear Ratio |
1st 2.769
2nd 1.937
3rd 1.448
4th 1.134
5th 0.934
6th 0.728
7th none
Final 3.513
Autosetting level 28

AYC controller: 130
Active Stability Management: level 0
Traction Control Management: level 0
YCD Controller: 50%

Parts

Suspension: fully customizable
Brakes: Sports Brakes
Muffler: Racing
Computer: Sports
Turbo kit: Stage 3
Intercooler: Racing
Transmission: Full Racing
Clutch: Triple Plate
Flywheel: Racing
Limited slip: AYC Controller
Driveshaft: Carbon
Tires: Supersoft or superslick or medium slick( depends or the track)
AYC Controller: Installed
VCD Controller: Simulation
Lightweight : Stage 3

This is the setting of my DarkEvo VI (TMK edition)
I will gladly accept your suggestion.
With my Evo, I'm able to perform any kind of drift.
It is a little hard to control at first but I was able to get used to it.

 

[Sheron]

Wellcome to GTPlanet forums.
Firstly I want to remind you to use the search button before asking something.
This is the wrong forum. Anything related to drifting in GT3 goes here.

And watching your setting, I must tell you the spring rates are quite high. If you reduce all to the minimum I'm sure the car drifts more and better.

If you have problems while drifting any car, try to modify the toe, it's very important in the natural movement of the car (underteering-oversteering).

And there's a drift setting depot where you can find settings for almost any car. The link is my sig.

 

[DarkEvoMaster]

hehe Thanks Sheron.
Sorry for the trouble.