T500RS failed to start

[jackysatio]

Hello guys,
I have problems with my thrustmaster T500rs, last day I tried to update the latest driver using Thrustmaster apps, Its seems like when updating something went wrong, and now my wheel stop functioning. I tried the bootloader setup , but still cant.
Is there anyway I can manually insert the driver to the wheel using windows laptop/pc driver update?
Cause when I plug in the wheel to other laptop/pc, it seems like there are no driver inside the wheel, but my pc/laptop still can recognize the wheel as thrustmaster bootloader. So Im sure that nothing wrong with the wheel, only the driver inside missing/corrupted.
If I can insert the driver manually using windows pc/laptop, can anybody share the T500RS driver that directly copy from laptop/pc?

 

[APC900]

You may want to hold off on the Thrustmaster driver update if you are on an earlier driver and firmware....
This is what's happening in my case:
My T500RS steering wheel with Ferrari GTE rim add-on was tested and worked correctly with driver 4.TTRS.2016 (firmware 43) driver 2.9.1.0 just prior to installing the new package 6.TTRS.2017 (firmware 46) and driver 2.10.6.0.
The original (Chrome-colored, static) shifter work correctly, but the paddle shifters on the add-on rim do not. Everything worked as it should with the older firmware.
I am running Windows 10-64 version 1709 Creator edition (Build 16299.19). All drivers throughout the computer are up to date.
The previous driver package was removed using the add/remove feature in Windows.
(The wheel had been left unplugged prior to initial start-up of the PC, since I would be removing the old drivers.
The PC was restarted and the newer Thrustmaster driver package installed, with the wheel reconnected upon being asked to do so.
The firmware update was initiated AFTER the wheel setup was fully completed and only after a restart was performed.
The firmware process completed (all three green check boxes accepted) without any error messages.
A final restart was undertaken AFTER the firmware was completed simply as a precaution.