Toyota Supra Gear Ratios?

  • Thread starter Im_A_Ninja
  • 4 comments
  • 24,267 views
I´ve tested my Toyota Supra RZ ´97 with 904 bhp, and this is the setup I used to get 303.29 mph on the max speed test.
Front/Rear

Tyres: R5/R5

NOS: 70

Brakes: Never mind

Suspension
Springrate: 7.6/3.6
Rideheight: 156/86
Damper bounce 1/1
Damper rebound: 1/1
Camber: 1.0/0.0
Toe: 0/0
Stabilisers: 1/2

Gears
1: 2.180
2: 1.530
3: 1.150
4: 0.900
5: 0.740
6: 0.653
Final: 2.650
Auto: 6
To get this formation, first slide Auto to 25, then Final to max and Auto to 6. Final goes to 2.650 after that. Then adjust all gears as stated above.

Downforce: 0/30

LSD: 60/60/20 Apparently the maxvalue of 60 on the initial torqueset, locks the diff, so the other are not really important.

All the best parts are bought (Except brakes. Who needs brakes for max speed tests?), but the stage 4 turbo is applied for this run. Also give the car a wash and an oilchange!
Try it out and tell me what you think!
Enjoy!
 
Leonidae
:odd: well well.. does it do a wheelie?
Nope, it can´t AFAIK, but maybe if you put a crapload of ballast at the rear. Never tried that though. I´ve found that all FR roadcars I´ve tested are unable to wheelie even with 0 DF in the front. The engine seems to be too heavy for a liftoff.
Racecars are different; they pack more DF, and are made from lighter materials.
 
Back