weeli

  • Thread starter GT
  • 2 comments
  • 557 views
Front Rear (If Appliable)
SPRING SETTINGS
Spring Rate: 0% 0%
Ride Height: 0% 0%
Shock Bound: 70% 70%
Shock Rebound: 70% 70%
Camber Angle: 0.0 0.0
Toe Angle: 0.0 0.0
Stabilizers: 50% 50%

BRAKE SETTINGS Front Rear (If Appliable)
Brake Balance: 30% 30%

GEAR SETTINGS Front Rear (If Appliable)
LS Initial Torque: 0% 0%
LS Accel: 0% 0%
LS Decel: 0% 0%

Gear Ratio (CRITICAL!!!)
Auto Setting: 100% Wide
1st: -500 (If It Stops, its okay, leave it there)
2nd: -500 (If It Stops, its okay, leave it there)
3rd: -500 (If It Stops, its okay, leave it there)
4th: -500 (If It Stops, its okay, leave it there)
5th: -500 (If It Stops, its okay, leave it there)
6th: -500 (If It Stops, its okay, leave it there)
7th: -500 (If It Stops, its okay, leave it there)
Final: 45-50% (you Judge)

OTHER SETTINGS (Not Required) Front Rear (If Appliable)
Downforce: 0% 100%
ASM: Level 0
TCS: Level 0

TIRE SETTINGS Front Rear (If Appliable)
Tires: Super-Softs Super-Softs

Other Notes
Spring Settings Dont really matter in this set.

The Brake Settings dont matter really in this set.

The Gear settings are Critical. Dont Touch them, make sure you
follow them exactly, just generally hold <- down until it stops.

The Downforce IS a requirement, and once you hit 215-230, youll find
out why.

ASM and TCS just serve to slow the vehicle down with Accel and speed
at Certain points in Racing (Such as a Turn or an unbalanced Road).
And with this, you Dont want them to touch your gears.

The Tires
YEA! ..Take Supa-Softs ONLY for this one.


Only with the 1000+ car
 
Back