Which seat?

[Tool1312]

I have the Xrocker XR wheelstand which is virtually identical to the GT Omega Classic wheelstand apart from the pedal deck isn't adjustable for angle. The measurements are the same.
I'm in the market for a seat and frame to fit. My options are the revamped Xrocker XR Chicane or the GT Omega RS6 plus rear frame. Both will fit my wheelstand and atm are only £5 different
The only thing about the RS6 is I've seen that it's a bit narrow, and I'm not the slimmest. Just wondering if you've experience with either
Xrocker is on the left

 

[opelgt1969]

I have the Xrocker XR wheelstand which is virtually identical to the GT Omega Classic wheelstand apart from the pedal deck isn't adjustable for angle. The measurements are the same.
I'm in the market for a seat and frame to fit. My options are the revamped Xrocker XR Chicane or the GT Omega RS6 plus rear frame. Both will fit my wheelstand and atm are only £5 different
The only thing about the RS6 is I've seen that it's a bit narrow, and I'm not the slimmest. Just wondering if you've experience with either
Xrocker is on the left

I have a Next Level wheel stand and went with a X rocker seat with the round base. I drilled a hole in base of round base and at the front of wheel stand placed small bolt into each (drilled hole into bolt in seat bolt) then made a flat strip with holes drilled in each end used nut to hold into wheel stand then used a clip pin in seat end. Why? To keep seat from moving away from wheel, makes it easier to move and less room if you don't want to keep it setup all the time.If you would like to see pictures I could take some and post them.

 

[Tool1312]

I have a Next Level wheel stand and went with a X rocker seat with the round base. I drilled a hole in base of round base and at the front of wheel stand placed small bolt into each (drilled hole into bolt in seat bolt) then made a flat strip with holes drilled in each end used nut to hold into wheel stand then used a clip pin in seat end. Why? To keep seat from moving away from wheel, makes it easier to move and less room if you don't want to keep it setup all the time.If you would like to see pictures I could take some and post them.

I have an Xrocker Adrenaline seat at the moment which is getting a bit worn but it's setup all the time. Feel free to post your setup pictures

 

[opelgt1969]

Here's some pictures sorry about quality

 

[Tool1312]

I see what you mean, you've anchored it to the wheelstand

 

[opelgt1969]

I see what you mean, you've anchored it to the wheelstand

Yes if you do this make sure the hole in seat base is far enough back as to not scratch floor I think the bolt in the wheel stand I used a self tapper bolt leave it a little loose so you can swing the bar around as it would be a real toe pain.