ARL SHENANIGANS

  • Thread starter Jw_wk1010
  • 1,308 comments
  • 42,313 views
SydViscus
I found @Stryker13 's worst nightmare
143786186_420358059186610_1085794485358471915_o.jpg
Click to expand...
Looks straight to me :D
 
Almost shared this yesterday because it was so insane, but after this morning...I have to share.

I bought a Mazda RX-Vision Concept on Monday (I know, way overdue)

Tuesdays gift car: Mazda RX-Vision Concept

Wednesday's gift car: Mazda RX-Vision Concept

Thursday's gift car: Mazda RX-Vision Concept

And the absolutely ridiculous part...

Friday's gift car: Mazda RX-Vision Concept


I may never get a different gift car again...

Known glitch, or horrible luck?
 
scarecrow937
Almost shared this yesterday because it was so insane, but after this morning...I have to share.

I bought a Mazda RX-Vision Concept on Monday (I know, way overdue)

Tuesdays gift car: Mazda RX-Vision Concept

Wednesday's gift car: Mazda RX-Vision Concept

Thursday's gift car: Mazda RX-Vision Concept

And the absolutely ridiculous part...

Friday's gift car: Mazda RX-Vision Concept


I may never get a different gift car again...

Known glitch, or horrible luck?
Click to expand...


So by this logic I need to buy the 20mil dollar Ferrari. Lol
 
Stryker13
@SydViscus @BPeacock2727

This is the USB hub I mentioned I use with the PS4/PS5
https://www.amazon.ca/gp/product/B00XMD7KPU/?tag=gtplanetca-20

I currently have my headset, keyboard, and G29 connected to it.
Click to expand...

That's the same one I use. I've got my PS Platinum headset hooked up to this hub. The only issue I have with it is that I have to disconnect\reconnect the hub to the PS4 every time I wake it from standby so my headset will work. I should probably do more than 30 second troubleshooting, but whatever.
 
Last edited:
Sandite5
That's the same one I use. I've got my PS Platinum headset hooked up the this hub. The only issue I have with it is that I have to disconnect\reconnect the hub to the PS4 every time I wake it from standby so my headset will work. I should probably do more than 30 second troubleshooting, but whatever.
Click to expand...
Thanks @Stryker13 and @Sandite5 - I ordered it. Ive tried another hub in the past and found my headphones (Sony Bluetooth or however they connect to the ps4) would cut in and out. @Sandite5 you just unplugged the hub and then back in after the ps4 was on? Maybe i should have tried that with my other hub first. Lol oh well.
 
Sandite5
That's the same one I use. I've got my PS Platinum headset hooked up the this hub. The only issue I have with it is that I have to disconnect\reconnect the hub to the PS4 every time I wake it from standby so my headset will work. I should probably do more than 30 second troubleshooting, but whatever.
Click to expand...

Weird, I've never had any issue with it, granted the receiver/transmitter for my headset is always on so that may be why.
 
Stryker13
Weird, I've never had any issue with it, granted the receiver/transmitter for my headset is always on so that may be why.
Click to expand...

Yea, just messed with it a little bit. Seems to only be the headset dongle that has issues with the hub. The controllers charge and the wheel still works when hooked up to the hub after the PS4 comes out of standby, which is good news!

I can see that the light flickers on the hub when the PS4 is resumed from standby too, so it's for sure getting a power cycle. I guess the headset dongle doesn't like the power switching when the PS4 wakes up.

Which is funny because I think that also explained why the T150 calibrates twice when I wake the PS4 up. The USB ports completely restart when the PS4 is resumed from standby

BPeacock2727
Ive tried another hub in the past and found my headphones (Sony Bluetooth or however they connect to the ps4) would cut in and out.
Click to expand...

For the cutting in and out I would recommend you buy like a 3ft USB extender.
https://www.amazon.com/dp/B003YKX6VI/?tag=gtplanet-20

Hook that up to the hub\PS4, then put your dongle in the other end. Then you can move that dongle away from your electronics for a cleaner signal.... assuming you have a USB dongle for your headset.
 
Last edited:
Sandite5
Yea, just messed with it a little bit. Seems to only be the headset dongle that has issues with the hub. The controllers charge and the wheel still works when hooked up to the hub after the PS4 comes out of standby, which is good news!

I can see that the light flickers on the hub when the PS4 is resumed from standby too, so it's for sure getting a power cycle. I guess the headset dongle doesn't like the power switching when the PS4 wakes up.

Which is funny because I think that also explained why the T150 calibrates twice when I wake the PS4 up. The USB ports completely restart when the PS4 is resumed from standby



For the cutting in and out I would recommend you buy like a 3ft USB extender.
https://www.amazon.com/dp/B003YKX6VI/?tag=gtplanet-20

Hook that up to the hub\PS4, then put your dongle in the other end. Then you can move that dongle away from your electronics for a cleaner signal.... assuming you have a USB dongle for your headset.
Click to expand...
Tyou sir will mess around some more
 
You must log in or register to reply here.

Similar threads

llNovall
Michelin Pilot Challenge 2024, "PS5 Users Only", GS/GT4 Monthly Series on Friday Nights 9pm EST, **Recruiting New Drivers**
Replies
2
Views
1K
Mac1032763
Mac1032763
Moby45
ARL Super Formula special announcement.
Replies
25
Views
2K
triebs2
triebs2
TexasJDC
  • Locked
  • Sticky
Welcome to ARL
Replies
1
Views
13K
TexasJDC
TexasJDC
Moby45
ARL Super Formula Series
2 3
Replies
84
Views
8K
VGR645
VGR645
GTR4MROD
ACC Wednesday nights! All welcome!!
Replies
0
Views
1K
GTR4MROD
GTR4MROD

Latest Posts

Back