Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter daan
  • 139,950 comments
  • 38,625,760 views
Thanks @El Locho , I subscribed. I will give it a try tonight.

So, I should uninstall Sol and then manually copy the files over?
View attachment 1081860
Update SOL to the latest version (uninstall using the batch file in the SOL archive) and then just drop the CSP archive onto Content Manager to install it - I always select the "clean/reset configs" option in the installation dropdown when installing a new CSP version to prevent side effects/incompatibilities.
 
Update SOL to the latest version (uninstall using the batch file in the SOL archive) and then just drop the CSP archive onto Content Manager to install it - I always select the "clean/reset configs" option in the installation dropdown when installing a new CSP version to prevent side effects/incompatibilities.
With "CSP archive" you mean "lights-patch-v0.1.75-preview1-full.zip"?
 
I use JSGME for sol and csp previews
As a matter of fact, they are both built for it (thats why the MODS folder)

note: CM uses JSGME internaly, but I prefer not using it for any mods)

HERE is a link to a version I modified to work with a new, separate folder MODZ
 
Last edited:
The CSP wiper requires some more tweaking, the pivot point is not correct:

View attachment 1081855


RainFX is only functional in the preview builds which can be downloaded from x4fab's Patreon page. The official (free) versions don't yet include it.
Thank for spotting this out, here's the tweaked code:


[ANIMATED_WIPER_0]
ANIMATION_OFFSET = 0.25
DEBUG = 1
MESHES = WiperArm, WiperBlade, WiperRubber
UNDERLYING_SURFACE = Glass
GROUP_0 = 'WiperBlade@A=', 'WiperRubber@A='
GROUP_0_ANGLE_FROM = 47.7
GROUP_0_ANGLE_TO = -47.7
GROUP_0_ARM = 'WiperArm@A=*'
GROUP_0_AXIS = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_0 = 0.000000, 0.707107, 0.707107
GROUP_0_AXIS_OFFSET_1 = 0.000000, 0.707107, 0.707107
GROUP_0_END = -0.005520, 0.903320, 0.636231
GROUP_0_PIVOT = 0.000000, 0.615234, 1.289000
 
Hi. Just purchased the URD Cup Porsche and i think its great.
The only downside is the Dashboard inside the Cockpit.
Its too small in size so that the numbers are overlapping, and the resolution of it is too low so that it looks ugly, and it mirrors so that you can see the track behind the car...
Does anybody know if theres a fix somewhere out there ?

Thank you
 
Hi. Just purchased the URD Cup Porsche and i think its great.
The only downside is the Dashboard inside the Cockpit.
Its too small in size so that the numbers are overlapping, and the resolution of it is too low so that it looks ugly, and it mirrors so that you can see the track behind the car...
Does anybody know if theres a fix somewhere out there ?

Thank you
eventually post some pictures of the problem? and what exactly do you mean by its low res, if its not?
 
you can try my releases:

Rally dirt/tarmac (50/60)

rallycross:
(Lyngasrx is not great sorry)

re: "hell"
There is a version released but it is quite poor imho. I have a wip, but it is quite difficult convert and needs alot of help.

upcoming is Shibuya dirt/tarmac but not quite ready for beta status...

you might like the rally track in my Dirt Car Racing - An Offroad Car Chasing Game conversion (yes, that is the name... ) https://sharemods.com/cug0gi3c67ew/rmi_dcroffroadracing_-_v1.0.7z.html
Thanks @RMi_wood - I just had an awesome few RX races with the a.i on Höljes. Great fun! This AC rally rabbit hole is gonna go a long way, I think.
 
Last edited:
Another small tinker I did very recently is updating the driver position in the Darche Cup. The first thing I noticed that the driver model is kind of short? And the hands clip into the steering wheel while turning which is a turn off for me. Anyway, I borrowed the KSANIM file from the AMG GT3 and it worked pretty well! Now the driver is in place as it should (though it is not perfect, I think this is much better than what came in the box).

Before:
Screenshot_urd_darche_cup_2021_sepang_21-8-121-18-35-28.jpg


After:
Screenshot_urd_darche_cup_2021_sepang_21-8-121-18-37-28.jpg


Screenshot_urd_darche_cup_2021_sepang_21-8-121-18-37-43.jpg


How it should be:
sample.jpg
 

Attachments

  • steer.zip
    96.6 KB · Views: 33
Last edited:
eventually post some pictures of the problem? and what exactly do you mean by its low res, if its not?
i cant because i drive in VR, i photo wouldnt show what i mean. the dashboard just looks ugly because its low res textures. the gear number looks like tetris. but not too big of a problem, never mind, thx!
 
Update SOL to the latest version (uninstall using the batch file in the SOL archive) and then just drop the CSP archive onto Content Manager to install it - I always select the "clean/reset configs" option in the installation dropdown when installing a new CSP version to prevent side effects/incompatibilities.
Probably a silly question but if you do a clean install do you have to redo all of your settings again? Thanks
 
Done some changes I felt needed to be done on the Bolide.
  • Fixed 3D face for the front air curtain and other parts of the car including the right side brake calipers
  • The upper half of the body is now in a gloss finish
  • Updated skins and colour schemes to reflect the concept car
  • Optimised textures
  • Updated power curve and output to Bugatti's specs, suspension, and tyres for improved drivability.
  • Steering lock-to-lock is now 300-degrees like in LMP1 cars.
  • Included baked AO
  • New setup options including aero, dampers, and suspension travel
  • Rear mirror is now a screen
  • Fixed passenger camera
  • Headlights now function as DRLs as intended on the IRL car
  • Exhaust flames now amber instead of blue
  • Other small CSP adjustments and stuff

View attachment 1081678

View attachment 1081676

View attachment 1081677

View attachment 1081690
Thanks. Great job. Car is a complete hooligan!
 
i cant because i drive in VR, i photo wouldnt show what i mean. the dashboard just looks ugly because its low res textures. the gear number looks like tetris. but not too big of a problem, never mind, thx!
vr, the first victim is always pixelated. got an vrheadset myself and res multiplier doesnt do anything aswell, even ran ac with csp and sol in vr on a 780 so thats probably why.


[/QUOTE]
 
Last edited by a moderator:
Probably a silly question but if you do a clean install do you have to redo all of your settings again? Thanks
the settings shouldn't be affected by a clean install, but if you save the settings to a profile you should be safe.
 
Last edited:
View attachment 941695 View attachment 941696 View attachment 941697


Eastern Creek Raceway 2014 v3.5 a R1cho by Rainmaker updated by CrisT86 for AC 1.16.3

  • Easter Creek, Easter Creek Amaroo, Easter Creek Brabham, Easter Creek Druitt track variations
  • GrassFX enabled on all track variations

Feel free to update more, maybe if possibile, where possible with lights.

https://sharemods.com/75j83ja11oxs/...aker_updated_by_CrisT86_for_AC_1.16.3.7z.html
This is a while ago, and the link no longer works. Is there an alt, please?
 
Probably a silly question but if you do a clean install do you have to redo all of your settings again? Thanks
personal settings are stored in .\AppData\Local\AcTools Content Manager\
so yea, it keeps your settings... but thats not always a good thing. The good thing is they are dynamic so be sure to check for new options in newer releases and enable/disable them etc to save for that ver.
 
Done some changes I felt needed to be done on the Bolide.
  • Fixed 3D face for the front air curtain and other parts of the car including the right side brake calipers
  • The upper half of the body is now in a gloss finish
  • Updated skins and colour schemes to reflect the concept car
  • Optimised textures
  • Updated power curve and output to Bugatti's specs, suspension, and tyres for improved drivability.
  • Steering lock-to-lock is now 300-degrees like in LMP1 cars.
  • Included baked AO
  • New setup options including aero, dampers, and suspension travel
  • Rear mirror is now a screen
  • Fixed passenger camera
  • Headlights now function as DRLs as intended on the IRL car
  • Exhaust flames now amber instead of blue
  • Other small CSP adjustments and stuff

View attachment 1081678

View attachment 1081676

View attachment 1081677

View attachment 1081690
Reuploaded a new version now with working wipers (CSP needed) thanks to @El Locho and @Mahad!

 
wow. thx..

well it is like that. ive done this display texture and it wasnt bad as i did it so id wonder if that changed now. its a wonder AC even supports VR
 
Another small tinker I did very recently is updating the driver position in the Darche Cup. The first thing I noticed that the driver model is kind of short? And the hands clip into the steering wheel while turning which is a turn off for me. Anyway, I borrowed the KSANIM file from the AMG GT3 and it worked pretty well! Now the driver is in place as it should (though it is not perfect, I think this is much better than what came in the box).

Before:
View attachment 1081880

After:
View attachment 1081881

View attachment 1081882

How it should be:
View attachment 1081883
You describe the changes and add a photo for clarity, but nothing is visible in the photo, not even the driver itself. Do you check what you publish, and even in expanded form? The last photo with the caption "how it should be" shows the car on the outside, when the corrections you made on the inside. Be more accurate.
 
wow. thx..

well it is like that. ive done this display texture and it wasnt bad as i did it so id wonder if that changed now. its a wonder AC even supports VR
i drive in VR since years, now with the G2. the resolution in it is crisp as hell.
The Darche is a great car! exept the unfinished dashboard. But it works and therefor a minor issue
 
i drive in VR since years, now with the G2. the resolution in it is crisp as hell.
The Darche is a great car! exept the unfinished dashboard. But it works and therefor a minor issue
its not really an issue since its normally no complain, the texture looks as good as the previous one so i dont see a problem or an issue at all. maybe checking your game would do the trick? also youre the first one i heared that from btw
 
Last edited:
Hi guys! I've posted a huge mod that fixed SimDream F1 2021 mod! Enjoy it!


Screenshot_gp_2021_at02_paul_ricard_2021_21-8-121-13-54-13.png

Screenshot_gp_2021_amr21_paul_ricard_2021_21-8-121-13-50-30.png

Screenshot_gp_2021_at02_paul_ricard_2021_21-8-121-13-48-14.png
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.

Latest Posts

Back