- 647
- France
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 139,913 comments
- 38,616,435 views
- 651
- Germany
Just found a track (Sandia Speedway) somebody was looking for on FB, link in the video description:
The mod could use some AI lines and lights, the 3d grass is not bad.Since I don't drift I removed MODEL_4 from models.ini to get rid of the cones standing in the middle of the track.
RainFX:
Update: it seems the cones need to be hidden via ext config:
The mod could use some AI lines and lights, the 3d grass is not bad.
RainFX:
INI:
[RAIN_FX]
PUDDLES_MATERIALS = road?, concre?, winnerc
SOAKING_MATERIALS = road?, concre?, winnerc
SMOOTH_MATERIALS = mshut, advs1, carteles
ROUGH_MATERIALS = curb?Update: it seems the cones need to be hidden via ext config:
INI:
[MESH_ADJUSTMENT_...]
MESHES = Traffic_Cone_027, Traffic_Cone_028, Traffic_Cone_029
IS_ACTIVE = 1
IS_RENDERABLE = 0you need to introduce yourself in either "Les pilotes > -présentez vous" or "Le coin modders > -présentez vous" depending on whether you consider yourself a racer or a modder.
Last edited:
- 1,852
- Tatooine - Outer Rim Territories
- 213
- Curitiba
I've been away from the forum, so this is why I am replying just now. Yeah, I agree. The same happened to our beloved race track here in Curitiba (Pinhais, actually, near Curitiba), Brazil. It ill be replaced by a residencial place.
I began to love racing cars when I went there for the first time. I was so passioned by this world that I made a webasite dedicated to this and managed to access the events for free as a photographer. It is so nostalgic to remeber that place that now it is in ruins.
Goodbye old friend...
Last edited:
- 1,267
- Italy
Wait wait wait wait. They have destroyed Curitiba too?!??!?!I've been away from the forum, so this is why I am replying just now. Yeah, I agree. The same happened to our beloved race track here in Curitiba (Pinhais, actually, near Curitiba), Brazil. It ill be replaced by a residencial place.
I began to love racing cars when I went there for the first time. I was so passioned by this world that I made a webasite dedicated to this and managed to access the events for free as a photographer. It is so nostalgic to remeber that place that now it is in ruins.
Goodbye old friend...
- 803
- Italy
Have you accepted the rules (reglement section) with a thumb-up?
- 651
- Germany
Assetto Corsa PC Mods General Discussion
On some cars when watching a replay and using the TV camera, the driver helmet sits higher than it should. But when close enough to the camera the helmet pops into the correct position. Is there a fix for this? Download: Driver_80 Floating Head Fix
www.gtplanet.net
- 1,852
- Tatooine - Outer Rim Territories
How can I present myself if I am not allowed to write? 
Yes I did.
I made the 1st step - accepted the rules (reglement section) with a thumb-up - of 3 steps.
1st step is accepting the rules and press the thumb-up icon.
Edit: I left discord and rejoin. Now I can write.
Thank you both.
Last edited:
- 647
- France
- 137
- São Paulo-SP
- NandoRockSP
This is Bolsonaro's Brazil.I've been away from the forum, so this is why I am replying just now. Yeah, I agree. The same happened to our beloved race track here in Curitiba (Pinhais, actually, near Curitiba), Brazil. It ill be replaced by a residencial place.
I began to love racing cars when I went there for the first time. I was so passioned by this world that I made a webasite dedicated to this and managed to access the events for free as a photographer. It is so nostalgic to remeber that place that now it is in ruins.
Goodbye old friend...
- 544
- Brazil
F Long <fernando.longa17@gmail.com> Attachments 08:44 (9 hours ago) for ETc Hello...hello...Gabriel, once again asking for help. A small drawing is included to explain what is happening. Summing up. Hello friends, if anyone has a suggestion on how to solve this problem I would be grateful. 1-I took the Ferrari 156 Sharknose to use as a base (chassis) to put the body of the Lotus 18 from 1960/61 from Rfactor, practically the same size. 2- In 3dsimed I just deleted the Ferrari body (first I saved the textures) I added the Lotus body and adjusted. 3- As the Ferrari wheels are spoked, I exchanged them with the Cooper T51 ones, however in the exchange, I noticed that the proportions of the Cooper wheels got bigger, I had to adjust the right size in 3dsimed. 4. I saved everything, first in 3dfx format, then kn5, everything is fine. 5. I opened the showroom in Content Manager practically the same thing as Ferrari 6. I enter a track, the car loads normally, drives normally, but the position of the wheels is very different. 7. Front position became narrow (almost glued to the car body). 8. Rear position departs . 9. I'm not able to solve what it could be, I tried to change some parameters in the "suspensions" file inside the DATA...but it only changes the height of the suspension.
Attachments
It's so sad so see when a track 'dies.' Riverside, Continental Divide, old Hockenheim, old Kyalami, old Zandvoort... Oran Park. The list is endless.I've been away from the forum, so this is why I am replying just now. Yeah, I agree. The same happened to our beloved race track here in Curitiba (Pinhais, actually, near Curitiba), Brazil. It ill be replaced by a residencial place.
I began to love racing cars when I went there for the first time. I was so passioned by this world that I made a webasite dedicated to this and managed to access the events for free as a photographer. It is so nostalgic to remeber that place that now it is in ruins.
Goodbye old friend...
And only sometimes of sometimes do the replacement projects make sense, even commercially. (Of the above, Kyalami is probably the only one I can understand, that hill seems a thriving place.)
- 46
- United Kingdom
Anyone have better lines and working ai for Willow Springs and Big Willow on Espirit305's channel ?
- 44
- United States
You're right, those are objective faults. I should have been clear that I was referring to mods with, for example, "reworked physics". While Jim Clark's lotus had objective behavior (which probably changed from race to race), there's nobody alive qualified to judge whether a simulated version of that car is "realistic". So while we're dealing with facts, there is an element of subjectivity in how we judge a mod's behavior.
I still think it's better for people to be able to submit fixes to an original author for incorporation into the "canonical" instance of a mod, but at least people who do "reworks" and "enhancements" should throw in a text file explaining what they did, why, and how -- that fort of practice raises everybody's knowledge and skill set.
- 544
- Brazil
So I discovered the problem. A Brazilian friend who is ( modder ) sent me a video explaining that this usually happens in 3dsimed when we change or move the original wheels of a car, as it is difficult to adjust later. And that's what happened, I changed all the wheels and tires of the Ferrari for all of the Cooper T51, as they contained the brake discs that theoretically would make it easier for me (and they are similar to those of the Lotus 18). Now it's a step back, that is, putting the complete set of the Ferrari and trying to change just the hub of the wheels.
- 1,205
- Arrakis
All the apps are here on this github acc-extension-apps page Claudio:
GitHub - ac-custom-shaders-patch/acc-extension-apps: Python apps for Assetto Corsa Custom Shaders Patch
Python apps for Assetto Corsa Custom Shaders Patch - ac-custom-shaders-patch/acc-extension-apps
github.com
Just put them in the python app folder, then turn them on in the CM settings/apps tab.
- 6,722
- The Bunker
Kunos Mazda MX5 ND (right-hand drive conversion for civilised VR users).
Wipers are on the correct side... they just need animating by magic pixies or AC's version of Rumpelstiltskin.
Wipers are on the correct side... they just need animating by magic pixies or AC's version of Rumpelstiltskin.
- Original car by Kunos
- RHD conversion by Kaiser (whereabouts unknown)
- LODs, driver swap, suits/helmets/gloves, shifting animation, paint jobs added by Momma Bongos (whereabouts unknown)
- New LODs and more accurate shifting animation added by M (last seen in the Dog & Duck)
mazda_mx5_nd
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
- 158
- Germany
I prefer the black ones, the gold ones seem a bit too "oldschool" for a racecar that modern.I ve done new shoes for the BMW , what do u think ?
Before/ after
View attachment 1114399
View attachment 1114400
View attachment 1114401
- 5,579
- Belgium
Tbh, I'd prefer the black shoes...
Last edited:
- 300
- Brazil
Hi my friend, thanks!
Would you share the link to the version you mentioned? I'll see if it's possible.
that's truly not great, the problem is everywhere too.I've been away from the forum, so this is why I am replying just now. Yeah, I agree. The same happened to our beloved race track here in Curitiba (Pinhais, actually, near Curitiba), Brazil. It ill be replaced by a residencial place.
I began to love racing cars when I went there for the first time. I was so passioned by this world that I made a webasite dedicated to this and managed to access the events for free as a photographer. It is so nostalgic to remeber that place that now it is in ruins.
Goodbye old friend...
Get the newest version of CM from here. Auto update is broken and your version is old.
- 803
- Italy
It is called Remastered but the layout's name is Revised.
Highly recommended add-on anyway.SPA - Remastered
This was not meant to be released. Was tired of looking at an outdated Spa track and have been tinkering with it... but since there was a lot of interest from the community, here it is. To install: simply put the extension folder and vao-patch...
www.racedepartment.com
I just renamed your file with the new layout name and it seems to works: spa_spa_revised-ATR.json
Your new Camtool and the discovery of this little tweak are a nice 45th birthday present.
- 141
- Canada
John's stuff is always goodIt is called Remastered but the layout's name is Revised.
SPA - Remastered
This was not meant to be released. Was tired of looking at an outdated Spa track and have been tinkering with it... but since there was a lot of interest from the community, here it is. To install: simply put the extension folder and vao-patch...
I just renamed your file with the new layout name and it seems to works: spa_spa_revised-ATR.json
Your new Camtool and the discovery of this little tweak are a nice 45th birthday present.
Similar threads
