- 161
- Aveiro
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 138,896 comments
- 38,058,913 views
__EASY__
(Banned)
- 864
- France
- 161
- Aveiro
Does it have the rallycross layout?
__EASY__
(Banned)
- 864
- France
- 602
- Doncaster
it'll take a while around 3 - 4 months to get them right 🤲
The Scud Race family is all together now. Just need the actual BPR Variants. And hopefuly. The Actual specs/models used for that game. AKA An F40 GTE model and the 9111995 Porsche 993 GT2 - Elf Haberthur Racing #82
Enjoy, hope you like it
1995 Porsche 993 GT2 - Elf Haberthur Racing #82
This is the Elf-Haberthur Racing Porsche 993 GT2 that ran in Le Mans 1995. It started 41th in the grid but it had an accident during the race. I have only found just a few photos of this car, so it's has been an adventure doing this skin. Link...www.racedepartment.com
View attachment 1062248
View attachment 1062249
Just Needing the models now. The mclarens bang on accurate just needing the correct skin for the viper and the accurate models for the Porka and F40.
- 161
- Aveiro
The GTA reference tho
- 6,687
- The Bunker
Thanks very much for this. Adding those two DDS files to each skin will bloat the car folder by about 150MB so I baked your two files into the main kn5 and it seems to have worked (setting CastShadow to 'false' in ksEditor was exploding some geometry, so I abandoned that idea for now - I'm not too familiar with ksEditor).
(back up the LOD_A kn5 first just in case I've borked something, it was a simple texture replacement in 3DSimEd which can be a bit squiffy at times, but everything seems to work OK).
Here's the new kn5. You can now remove the DDS files from each track skin.
https://we.tl/t-DhrGo853Vn
Last edited:
- 602
- Doncaster
can't Forget the Alpine GTA too which was NPC AI cars
- 206
- Russian Federation
good day. I can't figure out how to move these shadows, which are shifted to the side, from the wheel, but should be under the wheel. I used to correct it with "update ambient shadows" in cm showroom, now I can't change it.
- 156
- Madrid
Added to my list. Now I'm with exams and I'll be slower and a bit inactive, but I will do that skin.
Also, I think Tommy78's F40 have that skin if I remember, but it's a paid mod :c I think I'll buy it in a future
- 850
- Germany
for those of you unsure about tommy78's quality work you can now test his i30N TCR '19 for free.
mega.nz
tpongracz.com
File on MEGA
Free cars from the DTM ’91 and from the WTCR 2019 available
If you thinking about to buy the whole mod pack (DTM ’91 and/or the WTCR 2019) but you are not sure about it, and want to try before you buy, now you can try the 190E Evo2 on both platform AC…
tpongracz.com
Last edited:
- 602
- Doncaster
- 235
- Greece
Wonder IF anyone could help.
I am trying to skin a track wall at start-finish straight. If I go the usual way of exporting textures through CM and replacing the wall texture with the new one, things do the same as if I try to replace the material texture dds through 3dDimED.
This is the problem and this is how the new texture is applied to the material.
The question is what attributes do I have to set to Object/material (I don't know) and what do I have to change in general in order for things not to be double-sided or inverted. I really have no idea where to look.
Thanks
I am trying to skin a track wall at start-finish straight. If I go the usual way of exporting textures through CM and replacing the wall texture with the new one, things do the same as if I try to replace the material texture dds through 3dDimED.
This is the problem and this is how the new texture is applied to the material.
The question is what attributes do I have to set to Object/material (I don't know) and what do I have to change in general in order for things not to be double-sided or inverted. I really have no idea where to look.
Thanks
Last edited:
- 1,713
- Chicago, USA
- 5,553
- Belgium
This was a first for me... 🤔
- 509
- Brussels
I have no problem on my side. I use Eset Internet Security & Malware Bytes.
- 147
- Italy
Hi,
from min 19.20 you can see one of the first real onboard of ETCR Hyundai car.
That s new format started last week in Vallelunga Italy.
I know that s a lot of person don t like full electric car in motorsport races, however I think that it s very interesting the high level of technologhy behind of these car.
In the future we may get some good AC mod of full electric race cars.
Enjoy the video
from min 19.20 you can see one of the first real onboard of ETCR Hyundai car.
That s new format started last week in Vallelunga Italy.
I know that s a lot of person don t like full electric car in motorsport races, however I think that it s very interesting the high level of technologhy behind of these car.
In the future we may get some good AC mod of full electric race cars.
Enjoy the video
Last edited:
- 1,362
I'm looking forward to this. One of the best fictional tracks, if not the best (Maggiore is in the same league).
I must have spent several hundred hours on all its' different layouts, and it was a favorite for the league I raced with.
...and I'm imagining experiencing it in VR. Oooooh, it'll be good!
Thanks to "totally-not-Gutbomb" for working on it!
Last edited:
- 117
- Greece
Just an observation about file compress formats: previously (https://www.gtplanet.net/forum/threads/assetto-corsa-pc-mods-general-discussion.307899/post-13346658), you shared this same mod as 7z instead of zip, which was 40% (or 68 MB) smaller, which saves time and download quota.File on MEGA
Here is the original R15 Forza conversion that we did.
- 647
- France
BMW M4 Class1 2021
The car has just been made available for free for rFactor 2, I hope that some modders will not offer it for Assetto Corsa on their website as a paid mod this time 🤣🤣🤣🤣🤣🤣🤣😉
The car has just been made available for free for rFactor 2, I hope that some modders will not offer it for Assetto Corsa on their website as a paid mod this time 🤣🤣🤣🤣🤣🤣🤣😉
- 5,553
- Belgium
- 781
- United States
- 647
- France
- 5,553
- Belgium
Hmm... I overlooked the Class1 part, the one I posted is a GT3.
Similar threads
