I now now tried the Baza new version and Mac 10 version and Velos. All have the same oscillating. The Beck version is fine. Tried swapping data files but car crashed. I’m using a DD2. Tried the other fixes but no luck. It’s got to be a force feedback problem somewhere. Perhaps the question asked to Baza may resolve this. Fingers crossed.Many thanks for all the replies and suggestions.
As with @rjwylie, nothing has changed after trying the car.ini edit, or the FFB Tweaks.
Sad panda.
Barring any better ideas, now considering a fizzix swap with Legion's Beck 904. All Porsches, amirite?
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 139,162 comments
- 38,244,092 views
- 175
- Poland
- 167
- United Kingdom
I mean there's "evidence" of them "changing their ways" but it's pointless if they are just leaving key details out of their "evidence". If they really want to show them changing do a whole time-lapse of the car being made.
I do think that people are falling for the whole "we are changed" but they haven't changed. They are still taking others work and saying it's theirs.
It's one of them. I believe in people changing but I don't think simdream have yet (or haven't shown it)
Gas12
(Banned)
- 506
- England
Agreed, but in some form of defence, they get singled out along with RTM yet others get no metion at all and if you do, it quickly gets stiffled.
Someone selling ripped stuff for 7.99, isn't all that differnt if they charge a 7.99 sub on patreon per month... in fact logically its worse.
- 167
- United Kingdom
- 1,415
- Coventry
- graveltrap
Not sure the physics should be called good!! I just tried to plug in some real numbers… I look forward to the improvements you have made
Last edited:
What is your wheel lock in game/ windows? What are your FFB strength settings, both in game and in windows? sounds like you're compressing the signal, amplifying output resulting in clipping... Could you run a session with the ingame 'pedals' app activated, and have a look at the far right bar (that's the FFB) if that's constantly maxed out then you're clipping and have to reduce ffbHi there 👋
Firstly, thanks for all the great mods!
A couple of us are having a weird FFB issue with one of the 60's GTC cars (904) and (seems like) all of the Trans-Am mod cars.
I described what's happening above. Seems like some G920, G29, and at least one TT300RS users.
I'd really appreciate any suggestions or help you could offer?
Let's ask the man
Last edited:
- 1,937
- United States
- RaceManiacGT1
want to try it out later today, I've been hoping for a decent FK8 and haven't found one, since I drive one IRL as well.Not sure the physics should be called good!! I just tried to plug in some real numbers… I look forward to the improvements you have made
- 1
- United States
Anybody know any good low level open wheel racing mods? Tryna get one of my friend into circuit racing, but I don't wanna start them off with one of the faster, more intimidating cars.
Last edited:
- 167
- United Kingdom
RSS F3. Skippy. Formula Renault 2.0 make sure you add this. Formula Student.
These are just free ones. But there is an RSS F4 car. and so many other great cars I've missed.
Last edited:
- 788
- South Africa
Thanks for taking the time. Appreciated.
So, in Windows (GHub) I leave the wheel lock at 900, and in AC I check the "auto-adjust scale to match car's steer lock".
GHub doesn't have a strength setting, sensitivity is 50%. In game I use FBB post-processing with a LUT created using WheelCheck and LUT generator, and an in-game app called FBBClip specifically designed to modulate FFB and avoid clipping. It's set to 80% and Active On so it's watching for clipping all the time.
Ran a session with pedals app active and the FFB bar is pulsing in time with the oscillations at about 10%. Video if required (not sure if I can post that here)
Just discovered: If I use FFBClip and turn the strength down to 10% (it's lowest setting) the oscillations are just barely there. Of course there's no FFB either. Also, if I deactivate FFBClip completely and turn off FFB post-processing, and then turn in-game FFB to 150% (barely tactile FFB on a G920), I can just feel the tick-tock. Almost gone.
Okay, I can't speak for others that are having trouble, but I have an idea how to work around this now in my setup.
Thanks again. Keep on truckin'
Last edited:
- 1,362
For someone completely new to sim racing, I start them out with the MX-5 Cup.
If you really want to only go with open-wheel cars, here's a few candidates.
Estonia-25
Download from Race Department.
Formula Jedi
Download from Legion's Site
Formula Agile
Download from Race Department.
Last edited:
- 200
- Argentina
Formula Argentina 2.0
Presentamos la Formula Argentina 2.0 Mod desarrollado por Vracer y H22 . Cualquier error o sugerencia, dejarla en los comentarios !
www.racedepartment.com
Hi sir
Not FFB related but a little disturbing also is the lighting in the Mercedes SL. At night light casted by opponent cars onto the cockpit is way too strong... it happens only with the Mercedes. Can I change casted light per car in the data file or something please?
Last edited:
- 2,233
- MI
I don't think that's what they're talking about. I'm on a DD2 and I can guarantee that I'm not clipping one bit. It happens on certain cars say on the back straight of VIR. The wheel will start a mini back and forth oscillation until it gets so quick it's a vibrate. I'm thinking it has to do with either something not jiving in the suspension layout (something loose?) or the FFB Tweaks in CSP. Haven't done more testing but it's happened in other cars too.
Will try testing with FFB Tweaks off tonight and if I have time, moving some suspension arms. Caster? Something in here might be doing it.
- 1,937
- United States
- RaceManiacGT1
Quick impression, there are still some interior visual things that I am sure you know about(I am using VR these days), the oh shoot handle and the speaker grille has some weird reflection to them,and the dash looks very "oh the surface" as opposed to inset into the cluster.
The driving, I think the balance is believable. Most of my seat time in my car is on autoX courses(lower speed, 2nd gear mostly) and I have an adjustable rear bar so I assume my car is more "loose" compare to a stock one would be on a track. But from a traction standpoint this car seems to struggle to put power down more on SM tires, most autoXer uses "200TW" tires these days which are in theory a step down from pure street legal track tires like Cup 2s or R888R or something though most newer ones are not that far off over 1 lap compare to those, just don't hold their temperature management as well. I see SM being maybe sort of analog to 200TW but most SM tired car seems to be less grippy than what I'd consider realistic IRL. Unless my tires are very worn or on really dusty surface I rarely have traction issue even in driving around mostly in 2nd. I haven't tried the HR tires yet. Comparing laptime(having spend a lot of time recently in game on RT Mont Tremblant) the time(with SM) is a few sec faster than the stock tire new GR86, which seems plausible considering the higher speed track. Played with the alignment a bit and honestly balance wise seems reasonable.
- 44
- United States
Any chance it's the "FFB tweaks" in CSP? It seems like before I updated to 1.75 I seldom if ever had clipping and now I do for several cars, even old ones that were fine before.Many thanks for all the replies and suggestions.
As with @rjwylie, nothing has changed after trying the car.ini edit, or the FFB Tweaks.
Sad panda.
Barring any better ideas, now considering a fizzix swap with Legion's Beck 904. All Porsches, amirite?
- 6,269
- Ottawa
- Pyano1132
If anyone wants to know where Scamdream got their new Glickey model, here's the link. I don't have access to the model or the mod, nor do I want to, but judging from the images and some of the stuff on our photo thread, it's a 100% match AFAIK.
www.opticaldreamsoft.com
So yeah there's a few people on this sub who are still defending them. Stop.
If you really need a Glickey, wait until URD releases theirs and buy it. The GR010 sucked at first but the new update made it much better, so I have faith their officially licensed rendition will do the car justice.
Glickenhaus Racing SCG 007 LMH WEC 2021 Hypercar 3D model | OpticalDreamSoft
Low-poly PBR 3D model of Glickenhaus Racing SCG 007 LMH WEC 2021 Hypercar by OpticalDreamSoft. The model is suitable for computer/mobile games, broadcast, advertising, visualization.
www.opticaldreamsoft.com
So yeah there's a few people on this sub who are still defending them. Stop.
If you really need a Glickey, wait until URD releases theirs and buy it. The GR010 sucked at first but the new update made it much better, so I have faith their officially licensed rendition will do the car justice.
Last edited:
- 286
- Australia
Random question, not sure if anyone would be able to help:
Here's the scenario, and what I'm trying to do.
There's a mod of Bristol Dirt oval from NASCAR, but the cars all have slick tyres. What's the best way to give them treaded/dirt tyres?
Here's the scenario, and what I'm trying to do.
There's a mod of Bristol Dirt oval from NASCAR, but the cars all have slick tyres. What's the best way to give them treaded/dirt tyres?
- 178
- United States
- 4
- United States
- 788
- South Africa
Haha, the car barely has brakes, nevermind ABS
Thanks for the suggestion, turned ABS off in setup, no difference.This seemed like a good lead. Reverted to 0.1.74 and turned off ALL FFB Tweaks, restart CM... No change
Went as far back as 0.1.60 without success.
- 2,740
- Italy
- Yellohead
- Clydeyellow
Ohh, so that's where the painted on, cheap-1/43-scale-model seam lines come from! Gotta wonder, tho, the model has a poly count in the low 20ks, where do the extra 700k in the finished Simdreams mod come from?If anyone wants to know where Scamdream got their new Glickey model, here's the link. I don't have access to the model or the mod, nor do I want to, but judging from the images and some of the stuff on our photo thread, it's a 100% match AFAIK.
Glickenhaus Racing SCG 007 LMH WEC 2021 Hypercar 3D model | OpticalDreamSoft
Low-poly PBR 3D model of Glickenhaus Racing SCG 007 LMH WEC 2021 Hypercar by OpticalDreamSoft. The model is suitable for computer/mobile games, broadcast, advertising, visualization.
So yeah there's a few people on this sub who are still defending them. Stop.
If you really need a Glickey, wait until URD releases theirs and buy it. The GR010 sucked at first but the new update made it much better, so I have faith their officially licensed rendition will do the car justice.
Gotta wonder where they are ripping the 1973 formula models, tbh. Considering how their Brabham looks (gorgeous), sounds (like a cat being tortured in a CIA black site) and handles (like a dump truck), it would be interesting if we could cut out the middleman and start porting said models decently.
Last edited:
- 850
- Germany
The only question i have is.. did the pay the 99$ for the model?
Would make much sense for them.
Similar threads
