Assetto Corsa PC Mods General DiscussionPC

[racinjoe013]

Try something like this
[EMISSIVE_LIGHT_...]
NAME= meshname
COLOR = xx, xx, xx 'Values you want
OFF_COLOR = 0, 0, 0

Cars – Emissive objects

Configuration files for Assetto Corsa Custom Shaders Patch - ac-custom-shaders-patch/acc-extension-config

github.com

That works to an extent. It changes the color of the headlights, but it doesn't seem to change the color of the light cast on objects in front of the car. That light still looks blue for some reason. I can't figure out where the game is getting that color from.

EDIT: I think I got it. Thanks for the push in the right direction.

 

[Smurth]

Thank you!

Friends, can someone send me a good power.lut for F1 1995 and F1 1996?

I don't know how to edit the power.lut.
F1 1995 hits 301km/h and F1 1996 reaches the 346km/h
Something is very wrong, 'cause the top speed of both it's like 315km/h

Use notepad or any text editor to edit power.lut.
Use https://acstuff.ru/u/torque-helper/ to build it from the data you possess.

Top speed doesn't really have to do with power.lut.
Top speed depend mainly of drivetrain.ini (gears ratio) and engine.ini (rev_limiter).
Higher rev_limiter = higher top speed.
Lower final_gear_ratio = higher top speed.

power.lut define how much enery (or strength) the car have at a given RPM. You need strength to move the car. But the speed depend of "how" (drivetrain) this strength is given to the wheels. You can move the wheels easily if you have enough strength ; or painfully, if you have not.


EDIT:
You may take a look at this: https://motofomo.com/power-and-torque-math/

 

[Pfalzdriver]

Released:
Mercedes-Benz AMG GLC 63s 4MATIC+ (v0.9)

Original car (v0.8) by DJP & MOLOD, Sound by grid-777

Rework (v0.9) by Pfalzdriver includes:
- RainFX v2 ready
- Open Bonnet (Extra-A)
- Basic HUD (Extra-B)
- Working Wipers, both front and rear
- LODs
- VAO
- Fixed external/internal meshes
- Damage and dirt textures (dirt texture will be replaced in the future tho)
- Damaged glass and body
- New plates
- Fixed engine damage caused by turbos
- Fixed dash light, added extra symbols
- Physics adjustments
- Adjusted cameras
- Removed semislicks
- Removed some skins and unnecessary files
- Fixed some textures and shaders
- Replaced navigator with android
- Extension updated
- CM Paintshop
- Camera Trajectory
and much more

Download @YT

 

[DerLucky]

Here's a little data replacement I put together for the FSR GR86 Cup. Delete the old data file/folder inside the car (maybe keep them somewhere so you can switch back) and drop these in. There's also a setup file in there, just drop that into any track you like.
Story behind this: I wasn't happy with how the car felt, so I started fiddling with it. Bear in mind, I have no background/experience with this stuff, so it just goes by how I feel in the car. That's also the reason for the setup file. Basically, it's meant to be the all-time-on, default setup.
Anything I've done might work for you with that setup, or it might not. It could work for other setups, I don't know.
A few notes:
I changed mainly the car.ini, drivetrain.ini, setup.ini, suspension.ini and the power.lut
The power data is eyeballed, so definitely too smooth
I'm pretty sure the dampers are f'd up, I stopped toying with them; while driving they feel overdamped but ok(ish) to me.
I think the brakes are on the weak side
Flames and lights n stuff are missing
As for the notes in the UI, they're just a digital post-it for me, to keep track of what I notice being missing/off/wrong. Keep them, disregard them, delete them, whatever.

For me, these changes have turned this car into something I actually enjoy driving. As with anything in here: if you like it, here you have it, if you don't like it, leave it be.
Most importantly, have fun on track!

 

[Alguecool]

Yummm... or a ratatouille, or a quiche lorraine... French cuisine is appreciated all around the world! 🤤

Your computer doesn't. Or at least wont, I'm afraid.

Good thing it's talking data around here, I got a simple question : is there any way to modify simple info on encrypted cars ? Like, AI.ini where the cars wont start because gear change is too high, or driver3D.ini where the shift animation is set on the wrong side, etc...
I get that we can't bake the data files from CM, but is there another way ? is ext_config capable of overwriting this sort of info ?

Really a shame when modders are more focused on encrypting what's not their to begin with rather than polishing their work.

 

[Greg_ST]

Nissan 300ZX JGTC version 8(base 2)

A new base means you have to delete the old one

before adding the new one

(Delete the folder "nissan_300zx_jgtc"

from"\common\assettocorsa\content\cars\")

changes

-Added headlights

-New rear lights

-Rain ready"I think"&wiper

-4 New skins (20 total)

-Some other changes

-Fixed AO map

-Some changes in the "ext_config.ini"

Special thanks to

Patrik Varga for the light reflections

To all that helping me "forums youtube and comments etc..."

And A BIG THANKS to all my Patreons and on Youtube that support me

Download for free: Patreon

Spoiler: More images

 

[Raceforever40]

Soon Verry Soon

 

[safi hellie]

Another helmet.

 

[xNAPx]

Another helmet.
View attachment 1241845

Very nice shots mate, what settings are you playing?

 

[algoritmo13]

Here's a little data replacement I put together for the FSR GR86 Cup. Delete the old data file/folder inside the car (maybe keep them somewhere so you can switch back) and drop these in. There's also a setup file in there, just drop that into any track you like.
Story behind this: I wasn't happy with how the car felt, so I started fiddling with it. Bear in mind, I have no background/experience with this stuff, so it just goes by how I feel in the car. That's also the reason for the setup file. Basically, it's meant to be the all-time-on, default setup.
Anything I've done might work for you with that setup, or it might not. It could work for other setups, I don't know.
A few notes:
I changed mainly the car.ini, drivetrain.ini, setup.ini, suspension.ini and the power.lut
The power data is eyeballed, so definitely too smooth
I'm pretty sure the dampers are f'd up, I stopped toying with them; while driving they feel overdamped but ok(ish) to me.
I think the brakes are on the weak side
Flames and lights n stuff are missing
As for the notes in the UI, they're just a digital post-it for me, to keep track of what I notice being missing/off/wrong. Keep them, disregard them, delete them, whatever.

For me, these changes have turned this car into something I actually enjoy driving. As with anything in here: if you like it, here you have it, if you don't like it, leave it be.
Most importantly, have fun on track!

Another stealed car from iracing ? i hope one day iracing sue them for selling stealed content

 

[safi hellie]

Very nice shots mate, what settings are you playing?

I use loads but that one is default weathers (by ilija) which I've fiddled with and tweaked over time, filter again a tweaked one based on natural filter.
I have all the SOL's and Pures but always go back to default weathers I tweaked, i have about 30 weathers configs and over 40 pp filters.

I have over 40 configs just for CSP which are saved and i chop and change.

I need to get rid of some.... like my modding, its ordered chaos.

A new driveable showroom concept, needs more work on lighting.
And an early base for another one that needs lights and refining.

 

[Beezer215]

These are wonderful cars and allow me to drive some great mod tracks I haven't been able to race much because there were no cars that worked\fit the track. Tracks like @RMi_wood Charlotte oval layout for example. Curious though, are there road versions of these three cars available as well. Would love to whip these around Watkins Glen or Road America.

On another note, I hope i'm not stepping on any toes, but I redid the Ford and Toyota data file to fix the broken mirrors. It was nothing more than incorrect mesh names in the mirrors.ini file. You can use the mirror configurator app to set the display style for the mirrors the way you want them. The original data files are included in case I screwed something up.

Thank you, I appreciate the fix. No stepping on toes. Something I overlooked to be honest. 😬
I planned on doing Road Course versions as well. I'm trying to get to it soon. You really do need to have separate oval and road course version to do it right in AC.

 

[mrhenkz]

Use notepad or any text editor to edit power.lut.
Use https://acstuff.ru/u/torque-helper/ to build it from the data you possess.

Top speed doesn't really have to do with power.lut.
Top speed depend mainly of drivetrain.ini (gears ratio) and engine.ini (rev_limiter).
Higher rev_limiter = higher top speed.
Lower final_gear_ratio = higher top speed.

power.lut define how much enery (or strength) the car have at a given RPM. You need strength to move the car. But the speed depend of "how" (drivetrain) this strength is given to the wheels. You can move the wheels easily if you have enough strength ; or painfully, if you have not.


EDIT:
You may take a look at this: https://motofomo.com/power-and-torque-math/

Don't forget that aero also has a role in top speed. A lot more than I intially thought

 

[Hibki]

Hi guys!
Sorry for going really off topic here but i've been searching Gtplanet for the last couple of hours trying to find the Toprace GT3 conversions. All of the links i've come across didn't work. I have their Lexus RCF GT3 and it drives like a dream.
Can anyone give me a fresh Gdrive link or something for their GT3 cars?
Thanks in advance

 

[Atticus]

Indianapolis Motor Speedway 2.0

Finally i got the time and help to finish it . I hope you like it.

9 layouts.

• Indy 500
• Indy GP
• F1 GP (based on USA F1 GP)
• Moto GP
• Loco GP (based on Infield Layout from older conversions)
• All road courses have reversed layouts.

----
AI, AI limits, VAO patches DRS zones by KevinK2
Cams by DaBaeda


Many thanks to Coby Hill, KevinK2, slider666, Fanapryde and DaBaeda i appreciate your help a lot.

Enjoy.

https://mega.nz/folder/SOAQVbDL#zAo0G0ix_Vg4r6KEg-_0wg

Anyone knows if this is an rF2 conversion? (It is a conversion - from something - damone said so himself, and it's the reason it's not on RD - but from what?)

S397 updated the Indy Road Course from the 2008-2013 layout to the 2014- layout on 10 Feb, 2021, and this post from damone is from 20 Mar, 2021, so theoretically it's possble, if a bit tight.

 

[xedos6]

Another helmet.
View attachment 1241845

Oh! Nice: a duck!

 

[MasterFocus]

Soon Verry Soon View attachment 1241837

 

[RMi_wood]

Anyone knows if this is an rF2 conversion? (It is a conversion - from something - damone said so himself, and it's the reason it's not on RD - but from what?)

S397 updated the Indy Road Course from the 2008-2013 layout to the 2014- layout on 10 Feb, 2021, and this post from damone is from 20 Mar, 2021, so theoretically it's possble, if a bit tight.

Might be from NascarHeat5

 

[racinjoe013]

Your computer doesn't. Or at least wont, I'm afraid.

Good thing it's talking data around here, I got a simple question : is there any way to modify simple info on encrypted cars ? Like, AI.ini where the cars wont start because gear change is too high, or driver3D.ini where the shift animation is set on the wrong side, etc...
I get that we can't bake the data files from CM, but is there another way ? is ext_config capable of overwriting this sort of info ?

Really a shame when modders are more focused on encrypting what's not their to begin with rather than polishing their work.

Someone can correct me if i'm wrong, but I think you can still unpack the data file using CM even if it's encrypted. Then you can modify the files you want. You just won't be able to re-pack the data file. So you will have to rename the data.acd file to something like data_backup.acd. Then the game will read the files in the data folder instead of the data file and your changes should take effect.

 

[Atticus]

Might be from NascarHeat5

Huh, I got scared for a moment - but no, that's definitely not it, I just checked a video of the Indy RC from NASCAR Heat 5 and the track there has completely different geometry, object placements, kerbs etc. (Needless to say almost comically inaccurate.) Luckily it's not it.

rF2 is reasonably accurate, obviously not as much as the laser-scanned ACC version (which would be good enough for me had it not ran that silly Tilke loop for T5-6-7 instead of the modern chicane).

And damone's version is close enough to rF2's, but I'm not sure.

Let's tag the man himself, maybe he's still around sometimes. @damone13x

 

[CrisT86]

Someone can correct me if i'm wrong, but I think you can still unpack the data file using CM even if it's encrypted. Then you can modify the files you want. You just won't be able to re-pack the data file. So you will have to rename the data.acd file to something like data_backup.acd. Then the game will read the files in the data folder instead of the data file and your changes should take effect.

as far as i remember, if you try to unpack an encrypted data, you can extract the files, but they are totally destroyed and unreadable.

 

[JK1977]

Released : Renault Laguna Touring Car

here is my Renault in Version 1.0
-add lods
-add new physics (not real but better as the old)
-add new wheels

f302_renault_laguna_touringcar

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

 

[FeherDenes]

Does anyone have a mod for portland that doesn’t have big issues and looks alright too? Only two decent mods i know of are damone and simtraxx, but both have the pit limiter hang onto the start-finish straight next to the pitwall and some t1 track limit problems

 

[racinjoe013]

as far as i remember, if you try to unpack an encrypted data, you can extract the files, but they are totally destroyed and unreadable.

Ok. The only encrypted mod I ever tried was the GUE McLaren GT4 and I was able to unpack the data file and edit the mirrors.ini file. I just wasn't able to repack it. So I thought they all worked the same way.

 

[CrisT86]

Ok. The only encrypted mod I ever tried was the GUE McLaren GT4 and I was able to unpack the data file and edit the mirrors.ini file. I just wasn't able to repack it. So I thought they all worked the same way.

i have no idea because i trash almost the 99,9% of encrypted mods, btw maybe there's different levels of encryption, don't know tbh

 

[ROZTER]

Nissan 300ZX JGTC version 8(base 2)
View attachment 1241827

A new base means you have to delete the old one

before adding the new one

(Delete the folder "nissan_300zx_jgtc"

from"\common\assettocorsa\content\cars\")

changes

-Added headlights

-New rear lights

-Rain ready"I think"&wiper

-4 New skins (20 total)

-Some other changes

-Fixed AO map

-Some changes in the "ext_config.ini"

Special thanks to

Patrik Varga for the light reflections

To all that helping me "forums youtube and comments etc..."

And A BIG THANKS to all my Patreons and on Youtube that support me

Download for free: Patreon

Spoiler: More images

View attachment 1241828View attachment 1241829View attachment 1241830

Wow Amazing thanks

 

[jac0]

hi, for the Mercedes-Benz SL500 AMG , v1.1 by Unknown (found here )

has anyone been able to remove the disturbing mirror effect on the 2 little digital instrument pannels (showing the reflection of your gloves all the time)?

Would love the altered extension file ... to learn how this is done
I tried to solve it myself but failed

A very enjoyable cabrio for the rest! (well the car audio depiction is disturbing too ... but not as much

 

[safi hellie]

Oh! Nice: a duck!

Less duck like now.

And more progress on these, I think the PC one will be scraped though.

 

[Atticus]

I'm torn between the RT Oulton Park and the iRacing rip Oulton Park from years ago.

I'm mainly interested in the International no Chicanes layout, and while the iRacing version's mesh is so bad and bumpy out of Deer Leap that it peaks the revs like crazy, the RT version is practically undrivable in the braking zone into the original Knickerbrook corner due to two massive bumps in the mesh.

So far, I'm sticking to the iRacing version: peak revs are easier to tolerate than the rallycross in a proper corner. (Also the iRacing version's kerbs are more forgiving if I do go into the chicanes.)

 

[Fanapryde]

I'm torn between the RT Oulton Park and the iRacing rip Oulton Park from years ago.

I'm mainly interested in the International no Chicanes layout, and while the iRacing version's mesh is so bad and bumpy out of Deer Leap that it peaks the revs like crazy, the RT version is practically undrivable in the braking zone into the original Knickerbrook corner due to two massive bumps in the mesh.

So far, I'm sticking to the iRacing version: peak revs are easier to tolerate than the rallycross in a proper corner. (Also the iRacing version's kerbs are more forgiving if I do go into the chicanes.)

Practically undrivable ... 🤔 A bit exaggerated isn't it ?
First of all, it's laserscanned. That part of the track hasn't been in use since early 1970's, so it 's normal that the road surface isn't optimal.
The bumps are there, you know they are so why not adapt your driving style ?
I for one have no difficulties in any car there.
It has been discussed before here. Maybe it would be useful to make a seperate historic Oulton Park with matching surroundings, but this layout has been added because it was shown in the official Oulton Park site (which was most probably a mistake, since the layout is not used anymore).
Take it as a bonus to the other modern layouts.
Oh, and there’s no reason to be torn, both versions are free, use them at will.