Assetto Corsa PC Mods General DiscussionPC

[Felix789]

Drove around both sides of the track and noted where there were issues with holes. At least the ones I could find. Eau Rouge\Raidillon is fixed. Kemmel and Les Combes will be fixed shortly. Problem is, I can't find the other two you mentioned. Any chance you could make some screenshots of the general area you are referring to? Thanks...

And BTW, where were you people when I released the track in 2022? I specifically asked for people to point out mistakes so I could fix them and no one said anything about the holes in the road. I just assumed everything was fine for the past two years. Just joking of course. Thanks for making me aware so I could clean things up.

Hi and thanks for the reply! Unfortunately since 2022 I fell into one of those holes but I got out when WSC + GTC updates got released! x)
It's possible that there are more but I'm not sure, seems that connection of asphalt and that brighter 'concrete' edge creates some issues? Cheers!

• One post from our Discord showing the hole before the La Carriere entry at the house with the map beside with the X marking it
• the Kemmel straight hole on the left side of the track
• The last image below is the third one I know about, after La Carriere and the house, before the next right kink

 

[PGMurphy]

Every thing os good on my side, latest everything using LCS
Did you manually installed it or did you drag & drop into CM?
View attachment 1418418

I did a manual install, after deleting all files first.

For some reason the WSC60 Ferrari 330 P4 Spyder doesn't work for me (Failed to read car model, it might be due to encryption, if possible, consider not using it).
So I can't drive it, can't see it in showroom. The Berlinetta is OK...
Anyone else ?

EDIT:
@PGMurphy Pure GAMMA and C13 Aegis filter (v.2.14)
With Pure LCS it looks about the same.
Did you try to reset to default in the Pure PP app ?

View attachment 1418416

I did try a reset to default, but no change. Thanks, though!

 

[Jezza819]

Happy New Year

• https://thracing.de/wsc-legends-60s-pack/
• https://thracing.de/ac-legends-gtc-60s-by-bazza/

48 new or updated cars (including 6 new models never seen in AC before), only a few encrypted where it was the request/condition of the modeller. If you want to contribute or improve the cars, reach out.

There's a manual with installation instructions, credits (apologies if anyone's missed, DM and we can change it), a donate button and much more.

Please note the Alfa Romeo TZ2 will only work on CSP versions prior to v0.2.3 at the moment.

Highly recommended with Alguecool's magnificent DeTomaso and Piper mods and Pasta, Bazza & co's the Alfa T33/2 from Overtake.gg

Enjoy!

Out of both packs this seems to be the only car I have an error for. Is this another problem with one of the skins or in the car file itself?

 

[racinjoe013]

Hi and thanks for the reply! Unfortunately since 2022 I fell into one of those holes but I got out when WSC + GTC updates got released! x)
It's possible that there are more but I'm not sure, seems that connection of asphalt and that brighter 'concrete' edge creates some issues? Cheers!

• One post from our Discord showing the hole before the La Carriere entry at the house with the map beside with the X marking it
• the Kemmel straight hole on the left side of the track
• The last image below is the third one I know about, after La Carriere and the house, before the next right kink

View attachment 1418427


View attachment 1418428

This is going to be a lot harder than I thought and may be above my pay grade. I can do a quick and probably not correct fix, but it has one problem. You no longer feel a bump when you go from the asphalt to the concrete edge. On the plus side, the holes seem to be gone. Going to have to learn some new Blender tricks if i'm going to solve this problem the correct way.

 

[I_R_Brainiac]

Coming soonly to an Alfa Romeo near me.

 

[MasterFocus]

Out of both packs this seems to be the only car I have an error for. Is this another problem with one of the skins or in the car file itself?

View attachment 1418443

Just hit Relaod at the bottom and should be fine

 

[racinjoe013]

Hi and thanks for the reply! Unfortunately since 2022 I fell into one of those holes but I got out when WSC + GTC updates got released! x)
It's possible that there are more but I'm not sure, seems that connection of asphalt and that brighter 'concrete' edge creates some issues? Cheers!

• One post from our Discord showing the hole before the La Carriere entry at the house with the map beside with the X marking it
• the Kemmel straight hole on the left side of the track
• The last image below is the third one I know about, after La Carriere and the house, before the next right kink

View attachment 1418427


View attachment 1418428

When you have time, can you give this updated spa66_phy file a try and tell me if you still have hole issues in those spots you mentioned. Also, let me know if you notice any difference in how the track feels for better or worse. Like I said above, this was a quick and probably incorrect attempt to fix the holes, but if it works and the track feels the same, i'm good with that. Then I can move on to trying to tone down the road feel.

Thanks for the help...

spa66_phy_update

 

[Peter Boese]

I'm getting this strange grayscale look with the C13 Aegis filter (v.2.14). It's been like this with the last couple of versions of the filter as well. This version apparently has scripts for both Pure Gamma and LCS; the attached image is from Pure Gamma. I've done a fresh install of all PPF files. BTW, the LCS looks even more messed up. Any ideas?View attachment 1418415

You could try to reset the script settings in Pure PP app. Press the "DEFAULT" or "DELETE" button.

Question:

I just updated my csp to 0.2.5 and i fixed all the little issues apart from 1, which is on all kunos tracks i have a snow effect and no 3d grassfx the 3 or 4 modded tracks i quickly tried are unaffected. I have reverted back to 0.2.4 but i still have the issue. Has anyone come across this?

cheers

If you don't want seasonal track adjustments (we have winter now) then select a date in summer for your drive session or deactivate seasonal adjustments in the CM settings - CSP - track adjustments. Set it to "Never - use actual sun trajectory".

 

[ninezeroniner]

GTC Abarth Simca and WSC Ferrari Dino working fine here.

 

[Rodger Davies]

I'm getting this strange grayscale look with the C13 Aegis filter (v.2.14). It's been like this with the last couple of versions of the filter as well. This version apparently has scripts for both Pure Gamma and LCS; the attached image is from Pure Gamma. I've done a fresh install of all PPF files. BTW, the LCS looks even more messed up. Any ideas?View attachment 1418415

I was getting the same with LCS, went back to Gamma on my side and it's alright. I should try to figure out LCS (I get weird quirks like crazy amounts of sparks, headlight issues) but Gamma already looks great.

For some reason the WSC60 Ferrari 330 P4 Spyder doesn't work for me (Failed to read car model, it might be due to encryption, if possible, consider not using it).
So I can't drive it, can't see it in showroom. The Berlinetta is OK...
Anyone else ?

EDIT:
@PGMurphy Pure GAMMA and C13 Aegis filter (v.2.14)
With Pure LCS it looks about the same.
Did you try to reset to default in the Pure PP app ?

View attachment 1418416

330 Spyder doesn't have any encryption. Easiest thing would be to copy kn5 files and lods.ini from the Kunos car

 

[MS6Driver]

are where some good reference pictures of the 2019 Nismo that has been driven in 2019 DTM final round at Hockenheim?

Skin work in progress -> URD Shiro 2021

 

[Greg_ST]

New mod (WIP) from Forza model and project cars" but something is not right"
Also, I hope I did a good AO map for livery skins

 

[Den_88]

I like LCS))))

 

[maximeerkat]

You could try to reset the script settings in Pure PP app. Press the "DEFAULT" or "DELETE" button.


If you don't want seasonal track adjustments (we have winter now) then select a date in summer for your drive session or deactivate seasonal adjustments in the CM settings - CSP - track adjustments. Set it to "Never - use actual sun trajectory".

Thankyou very much for the reply Peter, it was indeed the issue with the "use seasons" setting. I totally missed this and should not have done. Cheers!

 

[shi]

Spa-Francorchamps 1994 v1.1

https://www.patreon.com/posts/spa-1994-116498468

View attachment 1407187
Spa-Francorchamps with 1994 layout.
Following the deaths of Roland Ratzenberger and Ayrton Senna at Imola earlier in the season, a chicane was installed at Eau Rouge to slow the cars. (wikipedia)
Conversion from F1 Challenge/ rFactor.

-CSP recommended
-30 pit/start
-AI, cam

NOTE; If you are using Sol and the track screen is dark, rename ext_config_for_sol.ini to ext_config.ini in the extension folder.

Credits & Thanks;
F1 Challenge Track by dmarques
(Based on the default F1C circuit with major upgrades to buildings and surroundings)

rFactor Track by F1-S-R (1994 Track Pack)
-Thank you for giving me permission

AC converted by @shi (shin956)
AI, sidelines and ai_hints.ini by IMEAN
logo.png and Sections file by @Fanapryde
Spa-Francorchamps 1988 Real TV Replay Cameras from 1988 & 1991 by @Gregz0r (Edited by me)
lights objects by @CrisT86 (new_lights_by_crist86.kn5, Part of spa1988)
Crowds texture by @Kniker97
.lua, fonts and config from Spa Francorchamps 2022

Spa Francorchamps 2022

About The first ever race that was hosted at Spa-Francorchamps in 1921 was a motorbike race. And for the 100 years anniversary of the track, Spa-Francorchamps wanted to reconnect with its history. That's why in 2022 the circuit has undergone...

www.racedepartment.com

some textures by kunos
Test and Feedback by Connor - Timonike

Enjoy.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
v1.01 changelog;
Updated cam by Gregz0r. (Thanks)
Added missing white lines. (chicane and T1)

v1.02 changelog;
Fixed a buried white line in the chicane.

v1.1 changelog;
“Ayrton how can i forget you” road surface signs were added to the chicane.
(Loomis3 created the texture. Thank you.)

Spa-Francorchamps 1994 v1.1
The link is in the quote.

v1.1 changelog;
“Ayrton how can i forget you” road surface signs were added to the chicane.
(Loomis3 created the texture. Thank you.)

Screenshot by Loomis3

 

[RicME85]

are where some good reference pictures of the 2019 Nismo that has been driven in 2019 DTM final round at Hockenheim?

Skin work in progress -> URD Shiro 2021

The best image that shows the layout of the whole car is unfortunately not linked anymore on Autosport, you just get a thumbnail of it on Google image search:

There is this one available elsewhere:

Seems the livery is the same as the SuperGT one but with very basic sponsor coverage

 

[Fanapryde]

330 Spyder doesn't have any encryption. Easiest thing would be to copy kn5 files and lods.ini from the Kunos car

I figured that, but copying the original kn5 from the Kunos car did not work either. Then a friend send me his kn5 and that got rid of the issue.
My original was from 2018 and his from 2021. So something must have changed somewhere.
Strangely enough, my Kunos car with the 'not working' kn5, has no errors and drives fine...

 

[Thockard]

Sure.

bsas_h22/6

Layout 6 is the correct one for 1998.

bsas_h22

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

I would appreciate if you could look at the Caesars Palace 1982 fastlane too. The cars always crash in the last corner before the goalline during the races and the ai is both slow and crashy on this track. We managed to improve it a bit with pekkahe but it's still crap.

caesarspalace1982

MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.

www.mediafire.com

I’ve created a new pitlane.ai file for the layout 6.

You can download it here : https://www.mediafire.com/folder/90jb3l4zij0l2/bsas_h22

It only has to be used with the layout 6, not tested with others and should not work with them.

To make a pitlane.ai work, the fastlane path and the pitlane path need to cross along a minimal distance, or to be close to each other on a minimal distance, in order to give AI some time to make its choice between staying on the track or pitting-in.

With this layout, there was only 1 intersection point between the two lines, after a flat-out turn, so AI had no time to decide to pit-in.

I've found another ai line for this layout made by Parrilla, you can download it here :

Buenos Aires faster AI

Faster AI for the H22 Buenos Aires Autodromo. You can find the full track for free on his Patreon here. Fast line + boundaries + hints for various layouts: 6 7 8 Alt. 9 Alt. B. 12 15 Other layouts I didn't bother with as many of those are for...

www.overtake.gg

He uses a hint file to make AI faster in each straight line, I think it is too much, the line is still fast without it. The only problem is that the line uses all the kerbs, not always ideal for F1. He should have make it with a car with a high ride height.

Question to track modders :

This layout is not exactly the 1998 layout.
To achieve this, there are only 5 cones to delete as the one on the following picture :

In the mesh, they are named AC_POBJECT 43, AC_POBJECT 44 .. AC_POBJECT 47.

Their material name is “ butacas”, I think they share this name with all the other cones on the track.

The car can collide with them and move them.

I don’t know much in modding tracks, but if I understood well, the ext_config.ini file allows to modify properties of mesh items.

Is it possible to modify the collision properties and visual properties of these 5 elements?

Or does it need to modify the kn5 file?

 

[RMi_wood]

try:

[MESH_ADJUSTMENT_0]
MESHES = AC_POBJECT 43, AC_POBJECT 44, AC_POBJECT 45, AC_POBJECT 46, AC_POBJECT 47
IS_RENDERABLE = 0
IS_ACTIVE = 0

be sure the names are correct, an underscore may have been missed when you posted

 

[MasterFocus]

Spa-Francorchamps 1994 v1.1
The link is in the quote.

v1.1 changelog;
“Ayrton how can i forget you” road surface signs were added to the chicane.
(Loomis3 created the texture. Thank you.)
View attachment 1418527
Screenshot by Loomis3

Funny enough, I watched this yesterday!!

Edit: I HIGHLY recommand to anyone!! (Its on Netflix)

 

[PGMurphy]

You could try to reset the script settings in Pure PP app. Press the "DEFAULT" or "DELETE" button.

I did this, but no change. Thanks, though.

 

[_Bazza_]

When you have time, can you give this updated spa66_phy file a try and tell me if you still have hole issues in those spots you mentioned. Also, let me know if you notice any difference in how the track feels for better or worse. Like I said above, this was a quick and probably incorrect attempt to fix the holes, but if it works and the track feels the same, i'm good with that. Then I can move on to trying to tone down the road feel.

Thanks for the help...

spa66_phy_update

Thanks a lot!

Could it be that part of the confusion is from Spa 34-66 not having the same physics-mesh? The folder does not contain a spa66_phy.kn5 file. Or was that somehow integrated in the main kn5 file?

When watching this tutorial, it looks like the surfaces.ini is also linked to the physical mesh, however it is just named road in this occasion. Is this correct?

 

[racinjoe013]

Hi racingjoe013, first of all, I'm a big fan of your work! Really amazing to see how you breath new life into all these tracks, in VR it's almost like being there

Is there any chance this track will get a track surface 3d-mesh overhaul? Even with old, soft vintage racing cars the bumps are hardly bearable, the bumps literally feel like massive potholes, with a DD wheel its ripping your arms...

Is anyone within this community aware of an existing 3d-mesh update? Does this mean a lot of work or is it do-able?

Best regards, Bazza

Can you try this updated road mesh file for Spa66 and let me know if the road seems toned down or the same as it was? If it's smoother, is it too smooth now? I can try to add some noise to the mesh. Thanks...

spa66_phy_update2

Thanks a lot!

Already feels like an improvement!

Could it be that part of the confusion is from Spa 34-66 not having the same physics-mesh? The folder does not contain a spa66_phy.kn5 file. Or was that somehow integrated in the main kn5 file?

I think Spa 34-66 had the road mesh integrated, but i'd have to go back and check. That was a THR track so whoever created that version may have integrated the mesh into the main kn5 file. I just added my visual upgrades\additions to what was already there.

EDIT: I just checked. The road mesh is separate in the 34-66 version, but it's named base_collision. You could try renaming the updated files i've posted to base_collision and see if they work with the 34-66 version of the track. No guarantees they will.

 

[_Bazza_]

So after watching that above mentioned tutorial it states renaming the surfaces.ini add a P for the ROAD and PIT parameters.
Is this still needed or does CSP manage this by itself? Question to trackmodders

../data/surfaces.ini

...

[SURFACE_0]
KEY=PROAD

[SURFACE_5]
KEY=PPITS

...

 

[StoffelWaffle]

New mod (WIP) from Forza model and project cars" but something is not right"
Also, I hope I did a good AO map for livery skins
View attachment 1418523

I've seen that one before !

 

[jac0]

anyone else has spotted this weird skydome issue of late?
The skydome is not rendered correct in both eyes...
when tilting my head to the left (VR only I presume ! - using Oculus render, CSP 0.2.3-preview1 and Pure Gamma 2.38)
in 1 eye the sky becomes plain blue , and the clouds are no longer rendered to some extent (above the horizon - from a certain height they are still rendered , just the clouds near the horizon are gone in 1 eye)
The further you tilt your head left the higher the clouds dissapear...

edit: this with Single Pass Stereo OFF ... when turning SPS on it's fixed !

(and I had SPS off because of the grass not being rendered correctly , but that seems fixed now! )

@Peter Boese : maybe still put that on a todo for people wanting to keep SPS off for some reason ?

 

[petercrill]

BMW M135i (F21) Public Release!!
Download:https://www.mediafire.com/file/4a3dyp6uubgd3dn/bmw_m135i_2013_1.0.zip/file
Converted From FH1
-AO inside and out
-Realistic Dashboard
-Physics By VRDRIVING
-CSP Settings
-Driver Animation

 

[MS6Driver]

DTM Dream Race 2019 Team Nissan Nismo #35 Matsuda (DTM meets Super GT GT500)

In light of the series' partnership with the Deutsche Tourenwagen Masters, two races featured entries from both Super GT and DTM. The first was the DTM season finale at the Hockenheimring, where one team from each GT500 manufacturer was invited...

www.overtake.gg

In light of the series' partnership with the Deutsche Tourenwagen Masters, two races featured entries from both Super GT and DTM. The first was the DTM season finale at the Hockenheimring, where one team from each GT500 manufacturer was invited to take part as a wildcard entry.

here is the first livery, the Nissan GT-R GT500 #35, driven by Tsugio Matsuda.

the Skin is for URD´s Shiro JT5 2021 car.

 

[Peter Boese]

anyone else has spotted this weird skydome issue of late?
The skydome is not rendered correct in both eyes...
when tilting my head to the left (VR only I presume ! - using Oculus render, CSP 0.2.3-preview1 and Pure Gamma 2.38)
in 1 eye the sky becomes plain blue , and the clouds are no longer rendered to some extent (above the horizon - from a certain height they are still rendered , just the clouds near the horizon are gone in 1 eye)
The further you tilt your head left the higher the clouds dissapear...

View attachment 1418605

edit: this with Single Pass Stereo OFF ... when turning SPS on it's fixed !

(and I had SPS off because of the grass not being rendered correctly , but that seems fixed now! )

@Peter Boese : maybe still put that on a todo for people wanting to keep SPS off for some reason ?

It is already fixed in CSP development and will be working with the next CSP update. There is/was a bug in the render pipeline...

 

[RMi_wood]

So after watching that above mentioned tutorial it states renaming the surfaces.ini add a P for the ROAD and PIT parameters.
Is this still needed or does CSP manage this by itself? Question to trackmodders

../data/surfaces.ini

...

[SURFACE_0]
KEY=PROAD

[SURFACE_5]
KEY=PPITS

...

this is absolutely wrong unless the actual meshes are 1PROAD_*, 1PPITS_, etc

surfaces.ini names MUST match the MESH name. If the mesh is 1ROAD_FOO the surfaces.ini must have
[SURFACE_0]
KEY=ROAD

for example

you can check any of my tracks to use as reference and you will find this exact convention