Assetto Corsa PC Mods General DiscussionPC

[Valyul]

I have some problems with the interior's UVW map in some parts of the car and I need to finish the driver/crew suits for the final release

When in cockpit, ground reflections on windscreen are related with those problems, cause I wanted to report that?

 

[sml44]

Hello everyone, this is my first time posting here. I need help with my Honda NSX from GTP.
I have a problem with the interior net in the car, which constantly appears and disappears while I'm driving.
Does anyone know how I can fix this?
Thanks.

 

[Natan5]

hello to all! since I always had help on this forum I share my Ferrari F355 Challenge ! (V0.96)

View attachment 1436746


Link : https://mega.nz/file/8kxR3TIJ#iPV1Lzabi3O20hPz54JkXZSLyJEMOFFXFHEUg3a3Amo

Good Fun !

Thanks for your share !!!!!!!!!!!

 

[holden0335]

Good evening. Where do you think the problem might be coming from?
I've reset all my CSP settings. I'm using the latest Pure with LCS. I'm using CM version -0.8.2731.39678. CSP 0.2.8 preview1. AMD driver 25.3.1.
the graphics have a metallic look
thank you for your help

 

[Frank25]

Hello everyone, this is my first time posting here. I need help with my Honda NSX from GTP.
I have a problem with the interior net in the car, which constantly appears and disappears while I'm driving.
Does anyone know how I can fix this?
Thanks.

This was a bug of an older CSP version. Install the latest version CSP 0.2.7.

 

[sml44]

This was a bug of an older CSP version. Install the latest version CSP 0.2.7.

ok thank you very much for the answer

 

[MasterFocus]

Good evening. Where do you think the problem might be coming from?
I've reset all my CSP settings. I'm using the latest Pure with LCS. I'm using CM version -0.8.2731.39678. CSP 0.2.8 preview1. AMD driver 25.3.1.
the graphics have a metallic look
thank you for your help

Seems like the paint is set to "transparent"?

 

[Aaron Green]

I seem to remember reading someone having issues with the Suzuka reboot circuit graphically, im having issues with the racing groove line looking very bitty and almost like a low res gif image sat above the track, there looks to be no shading it in, like its a low compression image all of a sudden. Any ideas what i can edit ext wise?

 

[313]

I seem to remember reading someone having issues with the Suzuka reboot circuit graphically, im having issues with the racing groove line looking very bitty and almost like a low res gif image sat above the track, there looks to be no shading it in, like its a low compression image all of a sudden. Any ideas what i can edit ext wise?

Look for
[SHADER_REPLACEMENT_...]
ACTIVE=1
DESCRIPTION= shadows cast on white lines
MATERIALS= groovesuzuka, groovesuzukalayouts
BLEND_MODE = ALPHA_TEST
IS_TRANSPARENT = 0

Delete or disable the entry (ACTIVE=0) This should help.
This is a so called shadow fix for rt tracks. I didn't noticed any disadvantages disabling it.

 

[GT3Masters97]

Logbook - What happened to you?

I won't deny that I've slowed down a lot on the various projects. I've spent more hours on Blender than on AC, and that's worn me out a lot. Lately I'm getting back into it, not fully but better than nothing. I'm trying to improve my skills, especially in the optimization and shading sector. I also thought about interspersing some simpler work, taking some models from Forza Horizon 5. It's an absurd disaster with the materials due to some conversion problems in 3dSimed, but nothing impossible. I think the first one that will come out is this 695 biposto. It's not finished but it's well underway. Unfortunately the correct dashboard is still missing. This way you'll have something every now and then, without waiting a year for a restoration of a gtr2 model.

Now I'm practicing with the self light script to create some nice effects, like headlights or interior lights. Of course, I redid the rims from scratch. I can't help it, I can't resist.

 

[Swift20B]

Hello everyone, been a long time since I've made a post since the track editing days of GT6. Been working with AC since then. Current mod I'm working with is this 2017 Ford Fusion Titanium by FSR from what I've gathered. I've meticulously edited it to be like my daily an 2018 SE model. I've got the physics down as well as fix most of the lights, wiper blade animation and added Android Auto to the dash screen. Only thing left is Hazard/turn signal lights, adjusting brights to light up inner bulb like irl, functioning speedometer and add license plates. I don't think I can add a plate without 3D software. Although is there any script I can add to my cars config file to fix the lights and speedometer?

 

[peppemuratore]

Has anyone else received the same email from RRS? I see a nice silhouette of a new GT3 car...😎😎

 

[giorgos_nes]

Has anyone else received the same email from RRS? I see a nice silhouette of a new GT3 car...😎😎View attachment 1436899

Got it too.
It is the Ferrari 296. Afaik it's the next car to be released by RSS

 

[Greg_ST]

When in cockpit, ground reflections on windscreen are related with those problems, cause I wanted to report that?

Ground reflections on the windscreen? can you post a picture, also I think it is from a setting in CSP but I don't remember

 

[Masscot]

Ground reflections on the windscreen? can you post a picture, also I think it is from a setting in CSP but I don't remember

Try this (add internal windscreen material name) :

;to remove road reflection from internal glass
[SHADER_REPLACEMENT_...]
ACTIVE = 1
MATERIALS =
SHADER = ksWindscreen

 

[BruceD]

Hello everyone, been a long time since I've made a post since the track editing days of GT6. Been working with AC since then. Current mod I'm working with is this 2017 Ford Fusion Titanium by FSR from what I've gathered. I've meticulously edited it to be like my daily an 2018 SE model. I've got the physics down as well as fix most of the lights, wiper blade animation and added Android Auto to the dash screen. Only thing left is Hazard/turn signal lights, adjusting brights to light up inner bulb like irl, functioning speedometer and add license plates. I don't think I can add a plate without 3D software. Although is there any script I can add to my cars config file to fix the lights and speedometer?

So I did a bit of digging about the speedometer because it depends if it is analog or digital as to how you sort it out. If I'm right the dash is as per the picture below? I managed to find a video which I presume is the FSR car that shows that the dash doesn't work. Being an analog it will require a dummy and physical needle to work properly, after that its just a bit of fiddling numbers in analoginstruments.ini to sort it out. Not sure if the model already has a dummy and needle in it.

You can also add the digital info as well, but that requires a dummy too. So some model editing will be needed.

Unless someone has a better idea...