Clarification on Wheel settings

[VTEC Driver]

Hi All,

I am using a T300 RS and I have set on FFB = 2 and Sensitivity = 10.
However there is a filed about "controller delay" (or something like that) with a scale that goes from -2 to 10.

I did in the past some changes on that from 5 to 8 even 10, but honestly I didn't recognized clear differences (most probably the issue is on me).
After the update 1.55 I decided to put = 0 (thinking to have a sort of neutral role on that).

Is this field really relevant for my wheel? Or does it affect more high level wheels like Fanatec and so on?

Thanks for the clarification.

 

[Goldin]

That controller setting doesn't affect wheel settings.

My settings on T300 are FFB=4 Sensitivity=2

 

[Pigems]

I use FFB 3-4, Sensitivity 1. Go into cockpit view in a car and park, then change the sens from 1-10 and jiggle the wheel back and forth on both settings. You will visibly see the lag in the on screen wheel vs your actual inputs on 10. 1 is 1:1 to what your actual wheel is doing.

 

[VTEC Driver]

That controller setting doesn't affect wheel settings.

My settings on T300 are FFB=4 Sensitivity=2

I use FFB 3-4, Sensitivity 1. Go into cockpit view in a car and park, then change the sens from 1-10 and jiggle the wheel back and forth on both settings. You will visibly see the lag in the on screen wheel vs your actual inputs on 10. 1 is 1:1 to what your actual wheel is doing.

Thank you both for the explanations.

I have tried the FFB=3 and it is incredible how much is increasing the reaction of the car to the wheel, it turns more quickly.
On the other hand changing the sensitivity to any other value I don't perceive any real change.
The instructions on the screen says that 10 would be the most sensitive to the asphalt reaction, while I see Pigems highlighting the opposite. I am confused.
However whatever I select I don't perceive changes in my driving while it is strongly impacted by changing FFB of just 1 point.