Creating oversteer under breaking

[moxtau]

Hi guys,

I was testing on tsukuba and this is a circuit it really makes obvious a car's understeer problems. I would like to have a bit of oversteer when braking so I can have the front of the car pointing to the exit of the corner quicker.

I tried to mess with the setup but the only thing I could achieve is more oversteer accelerating but that's not what I'm looking for.

Any tips??

Thanks in advance.

 

[SS_1182]

Lower the braking setting on the LSD.

 

[moxtau]

thanks for your input but that didn't really help

anyone?

 

[oppositelock]

Move the brake bias rearward. You didn't mention what kind of car it is, but I don't think you're going to get entry oversteer in any car that doesn't have a rear weight bias.

 

[veyron1001]

Increase compression in the front
increase toe and camber in the front
reduce toe in the back

 

[moxtau]

thanks guys did all that and still no luck. Im on a celica btw, it does now feel like the front end is looser but as soon as the load from braking kicks in it becomes stiff again, no way to make the rear oversteer...

 

[saidaouita]

e-brake? Kidding.....are you driving the Celica GT Four Rally car? I found these settings from "ninbim"

Aerodynamics: 7 / 25

Gear Ratio (top speed): 210

Initial Torque: 5/13 ---front,rear----
Acceleration Sensitivity: 20/45
Braking Sensitivity: 12/23

torque split 25/75

Ride Height -40 / -38
Spring Rate: 8.0/10.0

Extension: 7 / 4
Compression: 6 / 5
Anti-roll Bars: 5 / 2

Camber: 2.6 / 1.5
Toe : +0.60 / -0.10

Brake Balance: 6 / 5

 

[moxtau]

I did try e-brake

many thanks mate will check that out later

e-brake? Kidding.....are you driving the Celica GT Four Rally car? I found these settings from "ninbim"

Aerodynamics: 7 / 25

Gear Ratio (top speed): 210

Initial Torque: 5/13 ---front,rear----
Acceleration Sensitivity: 20/45
Braking Sensitivity: 12/23

torque split 25/75

Ride Height -40 / -38
Spring Rate: 8.0/10.0

Extension: 7 / 4
Compression: 6 / 5
Anti-roll Bars: 5 / 2

Camber: 2.6 / 1.5
Toe : +0.60 / -0.10

Brake Balance: 6 / 5

 

[Egghead43]

Try negative rear toe.
If that doesn't work, try making the rear lower than the front.