- 1,362
I just received my CSP V2 pedals. For the past year, I've been using my Logitech G27 pedals with my Fanatec GT2. I was having some intermittent issues with the GT2 not seeing the G27 pedals when it was first turned on. However, I'd disconnect and reconnect the cable, and eventually they'd register.
Today I've connected the CSP V2 pedals directly to the GT2 via the PS/2 cable, and nothing. The wheel doesn't seem to be getting any signal or information from the pedals.
So far I've tried...
Using the wheel in FM4 on the XBox 360 and turned on the feedback screen while trying to drive a car (shows the wheel and pedal sliders on the left). The wheel will rotate, and the buttons work, but nothing at all from the pedals.
On the GT2, I've flashed and re-installed the 681 firmware, and I've hooked the wheel up to a Windows PC with the Fanatec GT2 driver installed. In the driver properties window, everything but the pedals are registering (wheel movement, shifting, vibration test).
I've also hooked the pedals (no wheel) directly to the PC via the USB cable (disconnected PS/2 cable to wheel), and in the ClubSport Pedals properties window I can get full movement of all pedals and successfully run the vibration test.
I have a PS3 with GT5 as well, but I haven't tested that yet.
At this time I don't have a PC set up with racing games, but using the driver to get feedback should be enough to cover testing that.
Any suggestions? You think my GT2 has a problem?
Today I've connected the CSP V2 pedals directly to the GT2 via the PS/2 cable, and nothing. The wheel doesn't seem to be getting any signal or information from the pedals.
So far I've tried...
Using the wheel in FM4 on the XBox 360 and turned on the feedback screen while trying to drive a car (shows the wheel and pedal sliders on the left). The wheel will rotate, and the buttons work, but nothing at all from the pedals.
On the GT2, I've flashed and re-installed the 681 firmware, and I've hooked the wheel up to a Windows PC with the Fanatec GT2 driver installed. In the driver properties window, everything but the pedals are registering (wheel movement, shifting, vibration test).
I've also hooked the pedals (no wheel) directly to the PC via the USB cable (disconnected PS/2 cable to wheel), and in the ClubSport Pedals properties window I can get full movement of all pedals and successfully run the vibration test.
I have a PS3 with GT5 as well, but I haven't tested that yet.
At this time I don't have a PC set up with racing games, but using the driver to get feedback should be enough to cover testing that.
Any suggestions? You think my GT2 has a problem?