dope, slammed cars.

[Azuremen]

And with the poke if look with your eyes the tires meets with the fender, wheel pokes out. Learned the game if you want to talk again don't like don't post.

So is there a term for the poke when the wheel sticks out from the tire because it just can't be stretched that much? I'll take as much as I like regardless if I know the correct "STANCE" term for such nonsense, sorry.

I like some of these, but others are just plan stupid, like that S2000. Thus why I am posting. Problem?

 

[motortrend]

Not saying this in an agressive way mira_alex, but please stop double posting and overusing the term "low life"

 

[Perfect Balance]

Can everyone just be happy, if you don't like it then just to even come in this thread, you guys seriously don't know the low life.

And with the poke if look with your eyes the tires meets with the fender, wheel pokes out. Learned the game if you want to talk again don't like don't post.

Lol.

That was an inch ago. Static drop.

That was outside just now. 17x9 +10 215/45/17 and 205/45/17s on the front.

I don't know the low life. Let's see your "acheivement" brah.

BTW, just because the import thread isn't full of slammed cars doesn't mean that it's not the suitable thread for it. Go post your pics there.

Poke = tire sticking out past the metal because it doesn't fit under fenders.

Mexiflush is also a type of "fitment" but it regards this:

It doesn't fit.

EDIT: This is your claimed car.

Pretty sure I'm lower than that lol.

Point is, we know what fitment is, and there's PLENTY of it in the import thread, where it, and all of these cars posted here would be perfectly suited for.

 

[motortrend]

Is that... A supra spoiler?

 

[Stotty]

Why is this thread still open?

 

[Perfect Balance]

Why is this thread still open?

I'd like to know as well.

 

[Eric.]

Can everyone just be happy, if you don't like it then just to even come in this thread, you guys seriously don't know the low life.

And with the poke if look with your eyes the tires meets with the fender, wheel pokes out. Learned the game if you want to talk again don't like don't post.

Drop the whole "haters gonna hate" attitude. This could ALL be in the Imports thread, and a lot of them probably are.

 

[hemisport15]

This is probably the last time i'm going to post in this thread, but can we all just stop using "hater" or any other form of the word. You guys probably don't know this but Mike and all the other guys that run the site got so tired of that word that now if you try to make a post with "hater" in it, it shows up as *****.

 

[Keef]

This is probably the last time i'm going to post in this thread, but can we all just stop using "hater" or any other form of the word. You guys probably don't know this but Mike and all the other guys that run the site got so tired of that word that now if you try to make a post with "hater" in it, it shows up as *****.

Bro, hate the hater, not the word.

The Imports thread is the best place for pictures like these. It's a one-stop shop for import cars and styles and trends and race cars and whatever. The only problem is we all have bickering matches occasionally, but it's all in good fun.

Even people that are into the fitment and stance scene don't all agree on what is good and what isn't. The idea of a thread where nobody bitches is great, but to tell you the truth, it's never going to happen. Therefore, one thread where everything goes is much easier for all of us.

 

[CCXRacer]

Hey im glad there is a separate thread for these, keep them out of the import thread. haha

 

[RenoRanes007]

I'll throw my old Karmann Ghia in the mix:

 

[Sniffs]

Hey im glad there is a separate thread for these, keep them out of the import thread. haha

he's got a point.

where's the slammed trucks, btw?

 

[Eric.]

Thread title very specifically says cars...You may have to make your own thread for truck owners living "the low life".

 

[mira_alex]

Lol.

That was an inch ago. Static drop.

That was outside just now. 17x9 +10 215/45/17 and 205/45/17s on the front.

I don't know the low life. Let's see your "acheivement" brah.

BTW, just because the import thread isn't full of slammed cars doesn't mean that it's not the suitable thread for it. Go post your pics there.

Poke = tire sticking out past the metal because it doesn't fit under fenders.

Mexiflush is also a type of "fitment" but it regards this:

It doesn't fit.

EDIT: This is your claimed car.

Pretty sure I'm lower than that lol.

Point is, we know what fitment is, and there's PLENTY of it in the import thread, where it, and all of these cars posted here would be perfectly suited for.

Never said I was the lowest off all, and I know I'm not I'm coils and that's the lowest I can go without busting my pan, in about 2 months I will have my bag set up and then I can start saying I'm slammed. Right now I'm 21 and half inches from the ground to the fender. What about you? And again when I created this thread when people saw the pictures they knew what it was about so I don't get why you have to start and get technical. Just post pictures. 👍

And I'm far from the hater attitude, AGAIN I don't hate people and thier car, I dislike the negativity.

 

[mira_alex]

 

[Perfect Balance]

Never said I was the lowest off all, and I know I'm not I'm coils and that's the lowest I can go without busting my pan, in about 2 months I will have my bag set up and then I can start saying I'm slammed.

I never said that you claimed to be the lowest of all, but I do recall you posting that we "seriously don't know the low life" and I'm a good inch at least lower than you. Fender to ground clearance in irrelevant, because all cars have fenders designed to different heights. You could have a car tucking a lot of tire but still be high off the ground, and vice verse. Actual ground clearance is what hinders your ability to drive the car.

Oh, all those cars you posted could have gone in the import thread, and that Cobalt doesn't belong here, it has wheel gap.

 

[buickgnx88]

Would this be an apt example for this thread?

 

[mira_alex]

I never said that you claimed to be the lowest of all, but I do recall you posting that we "seriously don't know the low life" and I'm a good inch at least lower than you. Fender to ground clearance in irrelevant, because all cars have fenders designed to different heights. You could have a car tucking a lot of tire but still be high off the ground, and vice verse. Actual ground clearance is what hinders your ability to drive the car.

Oh, all those cars you posted could have gone in the import thread, and that Cobalt doesn't belong here, it has wheel gap.

Never said that to you directly right? Anyways man with the measurements this is what I meant, it will be the same on most car, lots of people measure their car like this to see how low the are.

My car:



Uploaded with ImageShack.us

Oh and this thread is not all about slammed cars, is about clean, simply stance cars.

 

[Eric.]

First person I've ever heard of talking about their fender-to-ground clearance.


How about "lowest-point-of-the-car-to-the-ground" clearance? More commonly referred to as ground clearance.

 

[WeinerSchnitzel]

I've actually heard/read people talking about their ground clearance measuring from the fender to the ground.

 

[Small_Fryz]

Never said that to you directly right? Anyways man with the measurements this is what I meant, it will be the same on most car, lots of people measure their car like this to see how low the are.

My car:



Uploaded with ImageShack.us

Oh and this thread is not all about slammed cars, is about clean, simply stance cars.

Thread Win?

 

[Azuremen]

I've actually heard/read people talking about their ground clearance measuring from the fender to the ground.

It makes so little sense to measure it that way.

Must be part of the "low-life"

 

[mira_alex]

anyways i'm done with trying to prove a point, because you will try to find a car irrelevant to what I'm talking about but here enjoy.

http://youtu.be/mak6blqwSAc

http://vimeo.com/24352879

 

[UnionStrike]

It's not always about who's the faster. Most of you guys don't like this, all you guys like are 4x4 and go fast, but I bet the Supra and the VW R and the Subi will take a lot cars even that low just saying.

Till they meet a VW R and a subi with properly sorted out suspension and wheels.

 

[mustangGT90210]

Never said I was the lowest off all, and I know I'm not I'm coils and that's the lowest I can go without busting my pan, in about 2 months I will have my bag set up and then I can start saying I'm slammed. Right now I'm 21 and half inches from the ground to the fender. What about you? And again when I created this thread when people saw the pictures they knew what it was about so I don't get why you have to start and get technical. Just post pictures. 👍

And I'm far from the hater attitude, AGAIN I don't hate people and thier car, I dislike the negativity.

I hope we never meet head on, because my bumper is exactly the height of the front of your car

 

[J-PaP]

This was clearing 6cm off the ground at the chassis rails and oil pan.

Ran the coil overs as low as they can go. Didn't drive that great though.

 

[Glubags]

I can't tell which is worse--the wheel fitment or the exhaust fitment.

And this... this is just getting stupid.

 

[Keef]

First person I've ever heard of talking about their fender-to-ground clearance.


How about "lowest-point-of-the-car-to-the-ground" clearance? More commonly referred to as ground clearance.

Totally. I've heard it before, and I've argued before that it's a completely useless measurement. Like you and PB said, the only fair measurement is ground clearance from the lowest point.

Fender-to-ground clearance is a great way to get thrown out of all the slammed threads on the hipster trendy forums. Ooooo, getting thrown out of a slammed thread. Blasphemy!

 

[RenoRanes007]

I forgot one:

 

[astrosdude91]

Mexiflush is also a type of "fitment" but it regards this:

It doesn't fit.

That would be a Houston car.