Drivehub SQ 1.5 sequential mode reverse

[kimsuhanmu]

Hi. I have a question.

Use 2.0.3 for the Drivehub.

This is because other versions of firmware operate sequentially in reverse direction. (item - Fanatech SQ1.5)

The problem is that the GT7 Fanatech mode error correction update will soon come out from the drive hub.

If it works opposite to that firmware, I can't enjoy GT7.

If you have a friend who solved this problem, please answer.


ps. Please understand that the context is strange using a translator.

 

[Turismo10]

Hi. I have a question.

Use 2.0.3 for the Drivehub.

This is because other versions of firmware operate sequentially in reverse direction. (item - Fanatech SQ1.5)

The problem is that the GT7 Fanatech mode error correction update will soon come out from the drive hub.

If it works opposite to that firmware, I can't enjoy GT7.

If you have a friend who solved this problem, please answer.


ps. Please understand that the context is strange using a translator.

Are you talking about how pushing the sequential shifter forwards changes the gear up and pulling it back changes the gear down?

If so you just need to go into the controller settings, button assign and swap the left paddle/l1 with right paddle/r1.

 

[kimsuhanmu]

순차 시프터를 앞으로 밀면 기어가 위로 바뀌고 뒤로 당기면 기어가 아래로 바뀐다는 말씀이세요?

컨트롤러 설정으로 들어가면 버튼 할당 및 오른쪽 패들/l1과 오른쪽 패들/r1을 교환하십시오.

Thank you for your answer!

You can change it in settings like your answer.

But that way, the paddle shifter works the other way around.

I don't know how to solve this problem.

 

[zeroasdf]

I also encountered the same problem, even with the latest 2.1.1 version