Driving seat advice...

E

EversmannGT

5
EversmannGT
Dear GTP experts...

I've finally saved up to invest on a seat for the new year... and this Open Wheeler item is my best pick for this price...

http://www.ebay.co.uk/itm/ws/eBayIS...sPageName=ADME:B:WNAFP:GB:1123#ht_4052wt_1270

I don't plan on upgrading the wheel to a g27 anytime soon (only got the standard DFGT) - i think this is better value than gameracer pro/elite? would massively appreciate your feedback... before i say bye bye to 270quid plus!

Cheers
EversmannGT
 
Damn, that would be an amazing gaming experience. Out of my league tho. Sticking to my "normal" PS3 controller...lol. However, if I had the room and the money....my story would have a different ending.
 
I would say no, but it's a matter of preference. Look at the seat height compared to the pedal plate. I wouldn't like that driving position, plus it looks like a pain to get in and out of.

But that's just my preference. Seems a little bit expensive for what it is.
 
Go for it dude! I use a Playseats and can't complain at all, great set up and my G27 was able to bolt right to the chair....I pity the foo who uses the controller! Good luck and see you on the virtual track!!
 
Coxis
I would say no, but it's a matter of preference. Look at the seat height compared to the pedal plate. I wouldn't like that driving position, plus it looks like a pain to get in and out of.

But that's just my preference. Seems a little bit expensive for what it is.
Click to expand...

Thanks for the comments Coxis...

I think I know what you mean - but the typical driving position in a go kart or sports car (if you got bucket seats) would be lower like this wouldn't it? compared to higher driving position in everyday cars...
 
Seat looks red hot (no pun) but I wouldn't get that because the wheel stand pillar being in the centre might be a hindrance to right foot braking. Something with the pillars on each side would be a better bet in my opinion.

I'm using this by the way:
http://www.obutto.com/simracing.html
 
If you're good with your hands then I would suggest in building your own chassis. I did.

It will only cost you a lot less than a prebuilt one.
 
chteo
Seat looks red hot (no pun) but I wouldn't get that because the wheel stand pillar being in the centre might be a hindrance to right foot braking. Something with the pillars on each side would be a better bet in my opinion.

I'm using this by the way:
http://www.obutto.com/simracing.html
Click to expand...

this exactly.

Go for another wheel stand if you think you are going to upgrade in the future.
 
EversmannGT
Thanks for the comments Coxis...

I think I know what you mean - but the typical driving position in a go kart or sports car (if you got bucket seats) would be lower like this wouldn't it? compared to higher driving position in everyday cars...
Click to expand...

Na, the position in this one is more in between GT and Formula 1 cars. Yet, it's a bit low, in my opinion.
 
It's a great looking seat. Assuming you left foot brake there will be no problems. If you don't left foot braking is faster. So you might end up doing it any way.
I think Dario Franchitti is the only major league racers of (indycar, F1. Lemans,etc) who right foot brakes.
 
Make a list of things you want and things you do not, I'm not a fan of centre posts. others have no problem. That's going to be your call.

Another thing to think about is most of these rigs have a narrow seat, if you or your mates are a little larger it's not going to be comfortable. Before you buy anything ask loads of questions, buy right buy once.
 
I also would say no to a center post,as Taff mentioned, do your homework. There are a lot of rigs out there and some are good and some are very good. I have had 4 rigs since I started sim racing, from not so good to very good.

Some are very flashy and some are very functional, which is it you want. I built a custom Zalem rig, they are made in Spain. You can see mine Here

Questions to ask yourself, do you only console race or are PC racers in the future.

Will you eventually add different pedals or a wheel, maybe a better shifter.

If you have any questions either post here or send a PM to one of the members here.

cheers
Darren
 
Don't build your own unless you're good at building things and making them look halfway decent. You'll end up with something junky, in your house, and you won't be driving. Get the chair of your choice and start racing, then if you want, for your second rig you can take what you've learned and build your own. IMO though building your own, unless you're good at it is highly overrated. You spend more time fixing than racing. Not to mention it just doesn't have the fit and finish of a commercial rig. Rig building companies aren't evil people, they are trying to service our market. I know I've had a couple of coworkers order a rig after seeing mine. They never would have gotten into the hobby if I had some contraption of wood in my living room. Good luck with your decision. :)
 
Mayaman
Don't build your own unless you're good at building things and making them look halfway decent. You'll end up with something junky, in your house, and you won't be driving. Get the chair of your choice and start racing, then if you want, for your second rig you can take what you've learned and build your own. IMO though building your own, unless you're good at it is highly overrated. You spend more time fixing than racing. Not to mention it just doesn't have the fit and finish of a commercial rig. Rig building companies aren't evil people, they are trying to service our market. I know I've had a couple of coworkers order a rig after seeing mine. They never would have gotten into the hobby if I had some contraption of wood in my living room. Good luck with your decision. :)
Click to expand...
If you find a good set of plans and are able to use a saw, drill, and screwdriver there is no reason you can build a professional looking racing chassis. I have limited skills with my hands and build a very nice solid chassis for around $100.

https://www.gtplanet.net/forum/showthread.php?t=227046

IMG_0554.jpg

IMG_0555.jpg
 
Last edited:
That's great, but judging from the last few years of DIYs not a lot of people have the time, skill, want to do so. I know it's some sort of sin to spend money on a cockpit, or at least people make you feel that way lol, but not everyone wants that. Gasp I know. But great job on yours, it looks fantastic.
 
Mayaman
That's great, but judging from the last few years of DIYs not a lot of people have the time, skill, want to do so. I know it's some sort of sin to spend money on a cockpit, or at least people make you feel that way lol, but not everyone wants that. Gasp I know. But great job on yours, it looks fantastic.
Click to expand...

Thats not why people advise others to build their own. they only advise that to those who have nothing - going straight from a controller and want to know how they should spend their money most wisely first.
most of these people are on a tight budget and can only afford a medeocre setup if they were to budget for everything at once. that is the only time i recommend people to build their own, because they should spend their money on a good wheel and pedals first, as they are the priority, THEN if they have money left over buy a nice rig, if not,build one
 
I'm always surprised — here and on other forums — how people who "build their own" assume everyone can, if they choose to.

Many of us can't; we don't have the skill set to do this. Not everyone took wood shop in high school. And not everyone who took wood shop aced it. I can write, and I get paid to do it. But I don't assume everyone can.
 
lemansfanatic
.......most of these people are on a tight budget and can only afford a medeocre setup if they were to budget for everything at once. that is the only time i recommend people to build their own, because they should spend their money on a good wheel and pedals first, as they are the priority, THEN if they have money left over buy a nice rig, if not,build one
Click to expand...

New Yorker
I'm always surprised — here and on other forums — how people who "build their own" assume everyone can, if they choose to.

Many of us can't; we don't have the skill set to do this. Not everyone took wood shop in high school. And not everyone who took wood shop aced it. I can write, and I get paid to do it. But I don't assume everyone can.
Click to expand...


This is just what I'm aiming at with my own project. To have the best of the both worlds in a way. Easy to build & cheap(ish) & still a proper rig. I do believe many would like to build their own if they had the tools & means and if the outcome could be guaranteed to be good as well.

So I'm trying to go middle way here.. build half of it and get the rest ready & much cheaper than a rig bought ready from a store.

In my project, the only thing you need to be able to do are to cut these alu tubes to lenght and drill some holes in them..

Basically these:

6672064143_a2daae385c_z.jpg


And you'll have the basic skeleton / frame done for the rig. No welding or anything that complicated needed to be done.

It will still be a "building project" but that can only be a good thing if you like to do things yourself & get some enjoyment out of it. :)
 
New Yorker
I'm always surprised — here and on other forums — how people who "build their own" assume everyone can, if they choose to.

Many of us can't; we don't have the skill set to do this. Not everyone took wood shop in high school. And not everyone who took wood shop aced it. I can write, and I get paid to do it. But I don't assume everyone can.
Click to expand...

You can't draw straight lines and cut 1x4's and 2x4's with a handsaw? After that all it takes is some wood glue, wood screws, and a screwdriver (or a cheap drill).

There is no real skill set needed for these simple cockpit builds.

The reason I encourage DIY and discourage spending so much money on a pre-built rig is 1) Money savings and 2) you can build it exactly how you want. So you don't have to deal with settling for something you dont like. The only cockpit that will ever be a perfect ergonomic fit for you is one you built yourself.
 
superbike81
The only cockpit that will ever be a perfect ergonomic fit for you is one you built yourself.
Click to expand...

Or a one that can be adjusted to that same position :P (pick your own seat always though)
 

Similar threads

N
just got a wheel for £1.33 ha!
Replies
5
Views
910
Mike0105
Mike0105
Maccer_42
Quagmire shaped crisp selling at ridiculous price on Ebay
2
Replies
39
Views
8K
Lizard
Lizard
B
Ebay GT4 Seat
Replies
1
Views
1K
Barry Burton
B
cpp214
  • Locked
DFGT now for sale on eBay!
Replies
0
Views
3K
cpp214
cpp214
amar212
Fanatec CSL Seat Review + ClubSport family vs. T500RS in GT5
2
Replies
57
Views
38K
superslowme
superslowme

Latest Posts

Back