Ferrari Enzo Tune or not?

[Fastcarsrock]

i did some fine tuning in the direction i was going with the enzo and i found a few tiny changes effected the handling and turning ability of the car greatly. It really has no understeer now and im lovin the car now. Heres my revised setup


Ride hight i left at the default level. Spring rate is
10.87F/15.38R

Dampers(compression)
3F/4R
Extension
5F/9R

Anti roll bars
4F/3R

Camber
0.0F/0.0R

Toe
-0.30F/0.16R

Brakes
6F/3R

Drivetrain
Initial torque 6
Accel 30
Braking 5

Downforce 70 (with optional rear wing)

Weight ballast
144kg
-50 (front).

 

[Fastcarsrock]

Im shure that from the original setup i had to this one Some changes might seem really odd or really really different from the original tune but i have put litteral days of tinkering click by click and saw large improvements in this setup change. Vs. the last setup. I tuned one on a setup sheet and the revised setup on b sheet so i could click bk and forth so i could better see the effects of each change.