GT Sport Livery Request Thread (Please read 1st post before asking.)
- Thread starter daan
- 579 comments
- 72,360 views
krisduv
Premium
- 1,659
- France
- krisduv
The livery is finished so is it ok for you @hardvibes ?
There's only one logo I couldn't identify and I replaced it by the most relevant one I could (the Arsham logo).
"The cooper union" was impossible to make so it's the same font but less elaborate.
"The 86 turbo cup" is a bit different too.
Lines are not perfect but I did my best.
There's only one logo I couldn't identify and I replaced it by the most relevant one I could (the Arsham logo).
"The cooper union" was impossible to make so it's the same font but less elaborate.
"The 86 turbo cup" is a bit different too.
Lines are not perfect but I did my best.
Last edited:
krisduv
Premium
- 1,659
- France
- krisduv
Hi all,
I need liveries for a GT3 championship that is going to be run next 15-16 weeks so I need a livery for following cars:
Mercedes AMG GT3
Porsche 911 RSR
BMW М6 GT3 Walkenhorse
Nissan GT-R
Audi R8 LMS
The livery should be identical should include Club Speed BG logo
, The Number 88 and preferably Grabber Blue as main colour for the livery.
Thanks in advance.
I need liveries for a GT3 championship that is going to be run next 15-16 weeks so I need a livery for following cars:
Mercedes AMG GT3
Porsche 911 RSR
BMW М6 GT3 Walkenhorse
Nissan GT-R
Audi R8 LMS
The livery should be identical should include Club Speed BG logo
Thanks in advance.
Last edited:
- 727
- Australia
- Twisteddrift
- 727
- Australia
- Twisteddrift
Cheers mate
- 30
- senna71
I just came across this one.....WOWZERS https://www.ferrari.com/en-US/competizioni-gt/488-gt-modificata. Can somebody do this livery?????
- 1,154
- Iowa
- JaCor653
- JaCor653
Can someone make the press/launch livery for the 2015 Formula Renault 3.5 on one of the SuperFormula cars? It does not matter which one; I have both. Also, some of the images show the car as having yellow side pods while others show dark gray side pods. I prefer the look of the gray pods, so could you please do it that way? Thank you.
- 1,400
- Pennsylvania
- Drex125
- ScoobyMcPancake
- 2,043
- United Kingdom
- AWRacing17
@Adam Barber Good Morning! could you do your McLaren Lark design on the Gr.3 650s, your Gr.4 livery was soo well done
- 2,937
- Derby, UK
- TPC_Abarber95
That was on the short list of cars to do, should look really cool on the Gr3 car.
- 2,937
- Derby, UK
- TPC_Abarber95
- 2,043
- United Kingdom
- AWRacing17
Champion! Thank you very much
- 104
- Oshawa, Canada
- JaedonGaming
Can anyone create a Corvette GR3 and GR 4 with the SVG's from this post? I'd like the Deskit logo to be the primary sponsor and DealerCorp to be the secondary. The DC icon can be used wherever. Other decals can be used to make it look like a real team 
If this is the wrong place to post this, please let me know
If this is the wrong place to post this, please let me know
Last edited:
- 120
- Essex, UK
Cheeky ask, but is it possible someone can make a decal from this? I can upload a larger file if this isnt adequate. Thx
- 36,655
- Scotland
- GTP_daan
This is the livery request thread. The SVG decal thread is over there, but as it's a detailed photo, the answer is probably no.Cheeky ask, but is it possible someone can make a decal from this? I can upload a larger file if this isnt adequate. Thx
- 120
- Essex, UK
- 2,969
- Curitiba
Can anyone create a Corvette GR3 and GR 4 with the SVG's from this post? I'd like the Deskit logo to be the primary sponsor and DealerCorp to be the secondary. The DC icon can be used wherever. Other decals can be used to make it look like a real team
If this is the wrong place to post this, please let me know
I'll try something in the weekend.
Edit: @Jaedon, here's the GR3 Corvette. It's my first design on any Corvette, so there's probably some rough edges. You didn't specify, but I went for something Sport Mode friendly and that's why the number plate kinda breaks everything being right in the middle. I know you have asked for the GR4 car as well, but maybe somebody else gets it done with a different approach.
Last edited:
- 104
- Oshawa, Canada
- JaedonGaming
I'll try something in the weekend.
Edit: @Jaedon, here's the GR3 Corvette. It's my first design on any Corvette, so there's probably some rough edges. You didn't specified, but I went for something Sport Mode friendly and that's why the number plate kinda breaks everything being right in the middle. I know you have asked for the GR4 car as well, but maybe somebody else gets it done with a different approach.
wowbagger you rock my friend. Thanks for this. I’ll jump on tomorrow and pick it up
- 2,969
- Curitiba
wowbagger you rock my friend. Thanks for this. I’ll jump on tomorrow and pick it up
About the Gr4 version, I can't promise you anything, but I'll let the time pass and see if I can come up with something similar, but not exaclty the same. I just don't want to do the same thing again because you can't actually match the design exactly on another car and that would drive me insane because I know I simply would never stop trying
.- 2
- United States
- Cayman125
PSN: Cayman125
I've had a livery for the 70 Dodge Challenger (STP Nascar livery) that has 8,000+ likes and has been in "cool selections" and "trending for about 3 years now. Today, PD decided it was a "breach of contract" and violated their terms of service" without any explanation to me. Why does PD do this and what can I do to get it back to being available to everyone? There was absolutely NOTHING inappropriate about the livery.
I've had a livery for the 70 Dodge Challenger (STP Nascar livery) that has 8,000+ likes and has been in "cool selections" and "trending for about 3 years now. Today, PD decided it was a "breach of contract" and violated their terms of service" without any explanation to me. Why does PD do this and what can I do to get it back to being available to everyone? There was absolutely NOTHING inappropriate about the livery.
- 2,969
- Curitiba
I get your frustration, but this is not the thread for this.
Your livery was probably taken down due to copyright infringements after a request or report.
I guess you could upload and share it again.
Last edited:
- 990
- Morrow, OH
- DRR_Sinyster
- Sinyster Plague
so I have a particularly odd request but a request nonetheless! I was hoping to get this particular car put onto the Aston Martin GR.4 (most fitting body I believe). While I cannot find many photos on google, there is a link to the livery for those who also use Assetto Corsa who can use it as reference material as well!
(I know I could say put it on the Maserati GranTurismo road car, but I want it on a race car and sadly we don't have the Maserati GT4 in GTS
)
(livery download link for the Assetto Corsa car)
@Cytoria I feel you'd enjoy having a crack at this
(I know I could say put it on the Maserati GranTurismo road car, but I want it on a race car and sadly we don't have the Maserati GT4 in GTS
)
(livery download link for the Assetto Corsa car)
@Cytoria I feel you'd enjoy having a crack at this
- 104
- Oshawa, Canada
- JaedonGaming
Anything works. Doesn’t have to be the same. I wish you could Share and Square so I could learnAbout the Gr4 version, I can't promise you anything, but I'll let the time pass and see if I can come up with something similar, but not exaclty the same. I just don't want to do the same thing again because you can't actually match the design exactly on another car and that would drive me insane because I know I simply would never stop trying
mans youre awesome
- 2,969
- Curitiba
Anything works. Doesn’t have to be the same. I wish you could Share and Square so I could learn
mans youre awesome
I guess I could record it, or try to, because usually it'll take me some different sessions to get something done on a car I have never tried. And it is a bit chaotic, I'll throw random stuff at it until something sticks only to find near the end that it doesn't quite work and have to do all over again. But it can be quite rewarding and therapeutic, I find.
A good way to learn is pick a real world car with a simple design and try to replicate in game: if you like Corvettes, the WEC GTE Pros from past seasons are pretty simple. That's how I got the basics and after that you'll start to be more ambitious and develop your own ideas.
There are some helpful videos on YouTube (this channel has some great designs done from scratch) which could be helpful to learn how to do the basics.
- 1,154
- Iowa
- JaCor653
- JaCor653
Can someone make this livery on either one of the Super Formula cars?
The logo at the top of the rear fin by the #27 just says "Old Betsy" in some cursive-style font. The four logos at the bottom of the side pod are Carhartt, Mopar, the 1970s Dodge Challenger logo, and the Dodge emblem. The Donut Media logo is the one on the rear wing side plate.
The logo at the top of the rear fin by the #27 just says "Old Betsy" in some cursive-style font. The four logos at the bottom of the side pod are Carhartt, Mopar, the 1970s Dodge Challenger logo, and the Dodge emblem. The Donut Media logo is the one on the rear wing side plate.
