GT Sport SVG request thread (Please read 1st post)

[TommyKaeselau]

And another two for you.

Thanks.
Look great. Design is almost done now

 

[CodeRedR51]

Not sure what you mean with a white outline. So I made you multiple versions of it, hope there is something suitable included.

Please complain if the quality is too bad, it was a bit hard to scan as the quality is a bit low.

Just a white outline around the black with clear background. You can remove the smaller text if necessary. Looks like one of the files wouldn't upload. (last one)

 

[Need4Speed685]

Hello again. I am looking to get the following decals converted into SVG for a FFF Racing Team livery replica, including certain criteria for each decal.

Orange1 Electric Motors/Foundry/Precision
View attachment 924854

Sicme Orange1
View attachment 924858

If you are able to get these all done, I shall refer to you as a decal god!

Now that the watches got done, is it possible for anyone to do these decals exactly as they're presented? On the real-life FFF Lamborghini, they have this black background underneath each one and it's not as simple as plucking an already existing decal in-game and trying to replicate it.

 

[baldgye]

Is this good enough?

Yeah man thats perfect, thanks

 

[ringkurier]

Just a white outline around the black with clear background. You can remove the smaller text if necessary. Looks like one of the files wouldn't upload. (last one)

Here is again the negative version of it.

If you want to have a thin outline, duplicate the decal and lay it under the original. You can achieve a 3D effect if you duplicate it twice and pull one horizontal and the other vertical a bit.

Should you have problems with that technique, someone with Inkscape skills have to put some work into this.

 

[Cytoria]

Hi @Cytoria I can't find back your post when you made me my number 27 based on Fabio Quartararo's number 20.

I'd love to have a masked version where I would be able to paint separately the outline and the outside (the inside would be the empty part).

I'm updating my Manufacturers Series livery, and I'd like to have my number the same color as the GT Planet logo and the stripes (whatever the base color would be).

View media item 63173
View media item 63172
View media item 63171
I put the decals you made in case it helps.

Hello,

Sorry for the late reply, this was a hard week at work.

Here are 3 decals :
27 as a mask
27 outline as a mask
27 outline for colouring aroud the mask (same as before but resized to be used in duplicate/replace with the mask above)

 

[TommyKaeselau]

Hey guys,
I don't know if anyone has done this one, but I can't find it anywhere.
View media item 63295
I know this is tough. I would need the text and the rooster.
If it's divided into several decals to make it work, that'd be fine.

I hope someone can help me.

 

[Cytoria]

Hey guys,
I don't know if anyone has done this one, but I can't find it anywhere.
View media item 63295
I know this is tough. I would need the text and the rooster.
If it's divided into several decals to make it work, that'd be fine.

I hope someone can help me.

Here are my Rooster Rojo decals from the previous LEC.

Rooster Rojo Scirocco GT4

• Cytoria
• May 1, 2020

Bonus - Pitlane

As usual, use duplicate/replace for the rooster layers (layer 1 at the bottom, layer 5 on top).

 

[Sian]

Hello,

Sorry for the late reply, this was a hard week at work.

Here are 3 decals :
27 as a mask
27 outline as a mask
27 outline for colouring aroud the mask (same as before but resized to be used in duplicate/replace with the mask above)

Thank you so much for your help and sorry for asking this when you also had so much to do with the LEC!

Edit : I'm about to go back to my livery and if I understand well what you did I'll be able to have also only the outline on the base paint... You just did more than I asked... and even thought about!

 

[TommyKaeselau]

Here are my Rooster Rojo decals from the previous LEC.

Rooster Rojo Scirocco GT4

• Cytoria
• May 1, 2020

Bonus - Pitlane

As usual, use duplicate/replace for the rooster layers (layer 1 at the bottom, layer 5 on top).

thank you so much.

Your design looks amazing btw

 

[OnlyOne07]

Hey guys!

I'm starting a new project, and I'd like to use his four decals, without the background color if it's too much to ask.

#001

• OnlyOne07
• Jun 7, 2020

#004

• OnlyOne07
• Jun 7, 2020

#007

• OnlyOne07
• Jun 7, 2020

#021

• OnlyOne07
• Jun 7, 2020

Thanks beforehand!

 

[RenoRanes007]

I have had a go myself but I just can't get the file size small enough without ruining the images.

I would really appreciate it if someone could convert these for me?

The one of the car may not be possible but thought I'd ask just in case.

Thanks alot!

 

[zortation]

 

[Cytoria]

Canada Dry decals

They are not perfect but they might do the job for you.

 

[Maninashed]

I have had a go myself but I just can't get the file size small enough without ruining the images.

I would really appreciate it if someone could convert these for me?

The one of the car may not be possible but thought I'd ask just in case.

Thanks alot!

Here are the first 3. The car would take 3-4 hours of hand tracing so I doubt it.

 

[RenoRanes007]

Here are the first 3. The car would take 3-4 hours of hand tracing so I doubt it.

Thanks alot for that, I thought that car one might be a bit too time consuming if it was even possible.

I have one other one thats a smaller file size to begin with and simpler, I had a crack at it but my limit is messing with settings on vectorizer and only got it down to about 76kb before it looked terrible. I don't mind loosing a bit of the detail like in my attempt, I've attached the original PNG and my SVG attempt, I'm aware it still might take too much time so never mind if so and thanks again.

 

[Maninashed]

Thanks alot for that, I thought that car one might be a bit too time consuming if it was even possible.

I have one other one thats a smaller file size to begin with and simpler, I had a crack at it but my limit is messing with settings on vectorizer and only got it down to about 76kb before it looked terrible. I don't mind loosing a bit of the detail like in my attempt, I've attached the original PNG and my SVG attempt, I'm aware it still might take too much time so never mind if so and thanks again.

Here is your svg that you supplied split into 5 layers. Only some of the shapes were simplified and the very small ones removed. Position layer 1, make 4 duplicates then replace each layer. Layer 1 bottom layer 5 top.

 

[RenoRanes007]

Here is your svg that you supplied split into 5 layers. Only some of the shapes were simplified and the very small ones removed. Position layer 1, make 4 duplicates then replace each layer. Layer 1 bottom layer 5 top.

Thanks a lot! It worked great!

 

[GTFan24]

This is a bit of a complicated request.

Basically it involves this logo:

Can someone make this version below with the vaporware logo above?

 

[Maninashed]

This is a bit of a complicated request.

Basically it involves this logo:

Can someone make this version below with the vaporware logo above?

Hopefully you want it like this.

 

[GTFan24]

Hopefully you want it like this.

Yup! Exactly like that thank you! Can you also make an svg for the Vaporware logo that includes only the text and not the bulls?

 

[Maninashed]

Yup! Exactly like that thank you! Can you also make an svg for the Vaporware logo that includes only the text and not the bulls?

Here you go.

 

[Need4Speed685]

DELETED

 

[jemuca]

Hello there guys! I´m looking and appreciate your assistance with the following logo (just the KODAI words). Thanks in advance!! cheers

 

[ringkurier]

Hello there guys! I´m looking and appreciate your assistance with the following logo (just the KODAI words). Thanks in advance!! cheers

Quality is a bit low to scan it. Please check the quality and complain if it's too bad for you.

 

[jemuca]

Quality is a bit low to scan it. Please check the quality and complain if it's too bad for you.

Thanks so much ringkurier that was fast!!! Its great!!

 

[zortation]

Canada Dry decals

They are not perfect but they might do the job for you.

Excellent, thanks

 

[Maninashed]

Hey guys!

I'm starting a new project, and I'd like to use his four decals, without the background color if it's too much to ask.



Thanks beforehand!

Pictures like these can be a pain for conversion. The black is patchy and broken up and the colors blend rather than have a sharp boundary. They would take some time to trace by hand and may still look a little ordinary. If they are not going to be very large on the vehicle the following auto scans with simplification may be of use. There are lots of Pokemon decals already made HERE.

 

[OnlyOne07]

Pictures like these can be a pain for conversion. The black is patchy and broken up and the colors blend rather than have a sharp boundary. They would take some time to trace by hand and may still look a little ordinary. If they are not going to be very large on the vehicle the following auto scans with simplification may be of use. There are lots of Pokemon decals already made HERE.

That is perfect, thanks a lot!

I was planning not to make them very big, as they'll be used to make some sort of patterns with them, so this definitely works.

 

[Andy_EVO432]

Would one of you kind souls be able to do these for me please.

Thanks in advance,

Andy