GT7 SVG request thread.

[MidnightRun85]

Awesome work!! Thanks @huff !!!

 

[huff]

Awesome work!! Thanks @huff !!!

No problem.

 

[crackhaed]

I'm trying to put my car's license plate in the game, would someone mind helping with a black/yellow California plate with the text LGLZ MSG on it? I also want to add the correct registration stickers for the rear plate, probably just easiest to layer those over as their own, right? I attached those if someone wouldn't mind making those too.

 

[huff]

I'm trying to put my car's license plate in the game, would someone mind helping with a black/yellow California plate with the text LGLZ MSG on it? I also want to add the correct registration stickers for the rear plate, probably just easiest to layer those over as their own, right? I attached those if someone wouldn't mind making those too.

Best I can do is 3 seperate files. I didn’t even try the state seal on the orange one, it would just end up as pixel mush.

 

[chris berger]

Sorry but could some help me out here, I have tried so many times to svg these but I wouldn’t come out could someone plz help

 

[GTFan24]

Can someone turn this into an SVG?

 

[VXR]

Would it be possible to resize this SVG to fit? In two parts if need be?

 

[huff]

Sorry but could some help me out here, I have tried so many times to svg these but I wouldn’t come out could someone plz help

The full flag was a good quality picture that I was able to get a good auto trace from, 10 layers. Use duplicate replace

 

[huff]

Flag in map, not as crisp but it may work for you.again, just an auto trace.

 

[crackhaed]

Best I can do is 3 seperate files. I didn’t even try the state seal on the orange one, it would just end up as pixel mush.

Thank you, those are perfect! I figured as much for the state seal.

 

[huff]

Can someone turn this into an SVG?
View attachment 1227579

 

[huff]

Would it be possible to resize this SVG to fit? In two parts if need be?

View attachment 1227585

This is just a png of svg, a picture of the actual picture. This file from wiki commons is actually huge. Like 300kb. I can give it you in 25 decals if you want to duplicate and replace to get it on the car.

 

[VXR]

This is just a png of svg, a picture of the actual picture. This file from wiki commons is actually huge. Like 300kb. I can give it you in 25 decals if you want to duplicate and replace to get it on the car.

It's OK, I noticed afterwards. Given it's a period flag, it might be on there already.

 

[huff]

It's OK, I noticed afterwards. Given it's a period flag, it might be on there already.

I’m sure there are people talented enough to do it in 15 kB but I am not that guy. Sorry I couldn’t help.

 

[Lebowski]

Hello, i need some decals making in some very specific ways please!

Ignoring the background totally, i need these 2 logos done in white with a thin black outline please.

And both of these logos done as just the white outline only so it can be layed over any body colour with that colour showing through. Also, a solid version of ADA.

Thanks very much!

 

[daan]

Hello, i need some decals making in some very specific ways please!

View attachment 1227838
Ignoring the background totally, i need these 2 logos done in white with a thin black outline please.

View attachment 1227839

And both of these logos done as just the white outline only so it can be layed over any body colour with that colour showing through. Also, a solid version of ADA.

Thanks very much!

Here's what I've got. Some are see through, some aren't, some are just recolourable text.

 

[Lebowski]

Here's what I've got. Some are see through, some aren't, some are just recolourable text.

Awesome, thanks very much!

 

[wowbaggerBR]

Don't know if this is a big job or not, but I'm failing at reducing these to 15 KB. Could someone take a look at them?

 

[jfast]

Hi there folks,

Hope I'm doing this correctly. I've only recently started messing around with Inkscape with a view to hopefully creating my own SVG decals etc. Tried re-sizing one down to below the maximum 15KB allowed by the game and had it down to 14.8KB.

I got the image uploaded, it appeared to look the part on laptop, but when I went to the PS to add it to a vehicle it looked a complete mess.

Anyhoos I'd appreciate if anyone could find the time to create a couple of SVG files that fit the required in-game criteria from the image(s) below?

There should be a white circular background on the first one and ideally the 2nd (all blue) one should be transparant where white shows.

Thanks in advance.

👍

 

[huff]

Hi there folks,

Hope I'm doing this correctly. I've only recently started messing around with Inkscape with a view to hopefully creating my own SVG decals etc. Tried re-sizing one down to below the maximum 15KB allowed by the game and had it down to 14.8KB.

I got the image uploaded, it appeared to look the part on laptop, but when I went to the PS to add it to a vehicle it looked a complete mess.

Anyhoos I'd appreciate if anyone could find the time to create a couple of SVG files that fit the required in-game criteria from the image(s) below?

There should be a white circular background on the first one and ideally the 2nd (all blue) one should be transparant where white shows.

Thanks in advance.

👍

Can you share the svg, it may be fixable.

 

[Vectra4]

Hi there folks,

Hope I'm doing this correctly. I've only recently started messing around with Inkscape with a view to hopefully creating my own SVG decals etc. Tried re-sizing one down to below the maximum 15KB allowed by the game and had it down to 14.8KB.

I got the image uploaded, it appeared to look the part on laptop, but when I went to the PS to add it to a vehicle it looked a complete mess.

Anyhoos I'd appreciate if anyone could find the time to create a couple of SVG files that fit the required in-game criteria from the image(s) below?

There should be a white circular background on the first one and ideally the 2nd (all blue) one should be transparent where white shows.

Thanks in advance.

👍

Rangers F.C. - Wikipedia

en.wikipedia.org

Looks like its small enough as well, If you are learning Inkscape making the second from this one would be a good test of the exclusion function.

 

[jfast]

Can you share the svg, it may be fixable.

@huff

The following is what I'd uploaded to my own gallery in the game via my laptop and it looked fine. Turned into a plate of red ketchup once I fired up the PS to add it to a car 😂

 

[huff]

@huff

The following is what I'd uploaded to my own gallery in the game via my laptop and it looked fine. Turned into a plate of red ketchup once I fired up the PS to add it to a car 😂

I ran it through svg omg, I didn’t see any issues in vectornator, but sometimes svgomg fixes little things. I’m not at my ps, but maybe you can try this one.

 

[jfast]

... If you are learning Inkscape making the second from this one would be a good test of the exclusion function.

Hi,

When I said 'recently' started with Inkscape... I meant literally about 24 hours ago and it all looks a bit alien still

I use - and have done for years - Paint.net for image editing and fairly proficient with that, but SVG files and Inkscape are both completely new to me in terms of editing. Plus it doesn't help that nowadays I can remember something I did 50+ years ago but don't ask me what colour socks I put on this morning 🤭

 

[huff]

Hi,

When I said 'recently' started with Inkscape... I meant literally about 24 hours ago and it all looks a bit alien still

I use - and have done for years - Paint.net for image editing and fairly proficient with that, but SVG files and Inkscape are both completely new to me in terms of editing. Plus it doesn't help that nowadays I can remember something I did 50+ years ago but don't ask me what colour socks I put on this morning 🤭

Do you have an iPad? If so, I highly recommend vectornator. It is free and very powerful. Also extremely easy to learn.

 

[jfast]

I ran it through svg omg, I didn’t see any issues in vectornator, but sometimes svgomg fixes little things. I’m not at my ps, but maybe you can try this one.

I'll give it a go next time I get on PS but have uploaded it successfully to my own gallery via laptop meantime.

Thanks.

Update: @huff
Nope, not an iPad nor iPhone user. It's cool, I'll plod away and get something sorted. More miffed at what I thought was a successful attempt at re-sizing/uploading an SVG file for it not to work properly.

 

[jfast]

I ran it through svg omg, I didn’t see any issues in vectornator, but sometimes svgomg fixes little things. I’m not at my ps, but maybe you can try this one.

Yaay!

It worked perfectly @huff. Managed to create my first decent (in my mind) car livery using it, too. Going to attempt to do the 2nd version I posted now using the exclusion function within Inkscape as suggested by another.

You're a star. Was down to reading the helpful posts from yourself and others that I decided to sign up here.

Keep up the good work you do here.

Thanks a bunch.

👍

 

[TetsuKobura]

Delete

 

[Uncreative]

Can somebody make this text? I need just the California text without the sunset and the border.

 

[LpDenny]

Hi there, may someone would be kind enough to turn this M.A.C Cosmetics logo into an SVG for me, please?