Honda of Japan produced three high-performance models of the Accord for the Japanese domestic market referred to as the SiR, which was available for sale at Honda Cliodealerships in Japan. The sports car approach to the Accord SiR was aimed at aligning the Accord with the Honda Verno sports sedan that replaced the Vigor, called the Honda Saber a platform mate shared with the Honda Inspire. The compact sedan role the Accord previously filled was now relegated to the Honda Rafaga and Ascot. The Accord SiR models came equipped with the Japan-spec H22A DOHC VTEC engine instead of the F22B1 SOHC VTEC engine found in the EX. The Japan-spec H22A DOHC VTEC engine specs were 190 bhp (142 kW; 193 PS) at 6800 rpm; peak torque 152 lb·ft (206 N·m) at 5500 rpm with a compression ratio of 10.6:1. The Japan-spec H22A DOHC VTEC engine was similar to the H22A1 engine found in the North America market used in the Prelude DOHC VTEC of the same era.
The Japan-built SiR sedan (94–97) was available with a 5-speed manual transmission as standard equipment or an optional "Grade-Logic" four-speed automatic transmission. The Honda of America-built (HAM) Accord SiR coupe and then the 1997 SiR wagon had the "Grade-Logic" four-speed automatic transmission as standard equipment (5-speed manual transmission were not available for these two models). It came with cloth sport seats styled similar to the Prelude or optional leather seats, both exclusive to the SiR. The SiR also had some power options found on the Accord EX. The Accord SiR coupe (94–97) and the Accord SiR wagon (1997) were exclusively available for the Japanese market. SiR chassis codes for the sedan were the CD6, the coupe-CD8 and the 1997 wagon-CF2 (production began on September 1996 for the 1997 SiR wagons which lasted for almost one year). The Accord SiR Coupe and the Accord SiR wagon (1997)which were exclusively built in the U.S. at Honda's Marysville Ohio plant (HAM) but were marketed for Japan export only for this particular model was not offered in North America.
The SiR Coupe and then wagon were built with the Japan-spec H22A DOHC VTEC powertrains which were shipped from Japan and were installed into the HAM-built Accord SiR models. The 1994–1997 "CD" Accord chassis was designed for the H22A DOHC VTEC powertrain to be installed; because the firewall was curved at the top to allow more space for the tilting backwards of the H22A DOHC VTEC engine near the middle of the firewall. The H22A DOHC VTEC engine was the most powerful inline four-cylinder engine Honda built for the Prelude and the Accord before the 1995 U.S.-spec V6 sedan. The Accord SiR suspension was improved with stiffer front sway bar(27.2mmXt4.0 mm), stiffer rear sway bar (16 mm), stiffer front coil springs and stiffer rear coil springs.
Features for the 94–95 Accord SiR models (sedans and coupes) included the following items: cruise control, automatic climate control (Similar to the first generation Acura CL), Bose stereo system, 7,400 redline tachometer, optional electronic traction control and optional limited slip differential for automatic transmission, optional SRS and airbags, factory installed driving lights, optional factory installed "pop up" navigation radio head unit, sound insulation liner under front hood, black-housing headlamps, no side molding was available on the Accord SiR sedan, optional rear sunscreen, optional sunroof and power retractable outside mirrors. Features for the 96–97 Accord SiR models (sedans, coupes and wagons) included the same as above while adding; optional cruise control, rear window wiper on the sedan, optional leather interior and a colored side molding for the sedan as well.
https://en.wikipedia.org/wiki/Honda_Accord#Honda_Accord_SiR_.281994.E2.80.931997.29
