GT Sport SVG request thread (Please read 1st post)

[Maninashed]

Just asking but could anyone of you decal wizards try creating a decal of the 2013 SRT Vipers rear fascia?

I mean the grey part between the taillights, because it gets stickered over if I try masking something.

If I could have a decal to put on top of all other decals to make it look unstickered, it would be awesome.

Dunno why PD made it so since in the GTS-R the rear fascia is grouped in the 'Other' part of decal set, and in the Gr. 4 Viper you can't put decals on it at all.

Thanks in advance.

Hope I got the right car and part. Try this using in line with camera projection. Needs a little squashing and stretching.

 

[Daz2708]

Here's everything you need. Black outlined with white filler, only the outline and only the filler to get every color combo you'd need

Top Man, Many thanks

 

[Threule]

Guys, what logos are used on 2018's LeMans vehicles appart from the white one?

 

[Jakedog23]

Little bit of a bigger request from me today. Thanks in advance for the help.

Spoiler: EcuTek

With this one can I get the black surround and the ECUT part in white?

Spoiler: Mishimoto

Spoiler: Verus

Spoiler: Whiteline

Can the get the outline of the yellow Whiteline in white and the line + whiteline.com.au in white as well?

 

[Savolainen83]

Hope I got the right car and part. Try this using in line with camera projection. Needs a little squashing and stretching.

Thanks man, gotta try it once I get on a proper computer instead of phone.

Also, what is your psn id, so I could check your ingame gallery and become a follower.

 

[Maninashed]

Thanks man, gotta try it once I get on a proper computer instead of phone.

Also, what is your psn id, so I could check your ingame gallery and become a follower.

Direct Link to decal here.
Or search tags used are dodge viper and gtplanetsvg. It's not 100 % but was about 8th reload.

 

[Maninashed]

Little bit of a bigger request from me today. Thanks in advance for the help.

Spoiler: EcuTek

View attachment 740006

With this one can I get the black surround and the ECUT part in white?

Spoiler: Mishimoto

View attachment 740007

Spoiler: Verus

View attachment 740008

Spoiler: Whiteline

View attachment 740009

Can the get the outline of the yellow Whiteline in white and the line + whiteline.com.au in white as well?

Doing them now, will edit here when done.

Edit: Was not sure with first one if you wanted small text also white so gave a few options.

 

[DesertPenguin]

So McLaren made this for someone. Can someone make it for all of us on the 650S. If it's not too hard and quick maybe also for the Gr. 3 and 4 cars? Much appreciated.

 

[JohnnyMac]

Hi everybody,
I could really use some help. I've been trying to make a simple two word .svg to go with a corporate logo that I downloaded online, and the GT site keeps telling me it's an invalid svg format. Been getting very very frustrated, because it looks to be sooo simple.

I'm using Inkscape (or trying to....). I've saved it as an Inkscape .svg, and as a plain .svg, but the GT site still kicks it out as invalid .svg.

The words OPTICAL FIBER, in font Sitka Display, in a light blue with the ability to change the color.....2hrs wasted with nothing to show except a couple of png's from Microsoft paint. I used the clear canvas option in paint. Example of what I'm failing at miserably shown below:

I tried breaking it up into two words, but that doesn't help.

Could someone please make this for me, or tell me what I'm doing wrong?

 

[Nuschel01]

Are you typing the words out in the font in Inkscape and then transform them to paths or are you just saving the mentioned PNG as a SVG file? 💡

 

[JohnnyMac]

Are you typing the words out in the font in Inkscape and then transform them to paths or are you just saving the mentioned PNG as a SVG file? 💡

I'm using Microsoft 3D paint to type the words out and get the font to match the corporate logo that I previously uploaded to the GT site..(found the mentioned corporate logo online as a svg, so no need to convert).
Then I'm saving it as a .png, then taking this to Inkscape and saving it as both an Inkscape .svg, and as a plain .svg.
GT tells me both are invalid.

I'm new to the .svg thing, and Inkscape has A LOT that I don't understand.

I can't figure out how to type the words and get the color in Inkscape..

 

[Maninashed]

I'm using Microsoft 3D paint to type the words out and get the font to match the corporate logo that I previously uploaded to the GT site..(found the mentioned corporate logo online as a svg, so no need to convert).
Then I'm saving it as a .png, then taking this to Inkscape and saving it as both an Inkscape .svg, and as a plain .svg.
GT tells me both are invalid.

I'm new to the .svg thing, and Inkscape has A LOT that I don't understand.

I can't figure out how to type the words and get the color in Inkscape..

If it is a font that you have Watch this video. (when he says design space just think gtsport)
Ignore what he says about page size as you will want to highlight all your text then click EDIT up the top then click resize page to selection.
To color text - have it highlighted and pick color from color bar.
many video tutorials for inkscape . This channel has some.
Hope it helps.

 

[svenhjs666]

anybody here to create this and upload it into zip/rar file ?

 

[Whiteshark90]

Hey guys, can anyone help me with this decal? I tried to convert it but on the decal uploader says SVG format not valid...
Many thanks in advance!

 

[MatskiMonk]

anybody here to create this and upload it into zip/rar file ?

 

[svenhjs666]

thanks mate

 

[JohnnyMac]

If it is a font that you have Watch this video. (when he says design space just think gtsport)
Ignore what he says about page size as you will want to highlight all your text then click EDIT up the top then click resize page to selection.
To color text - have it highlighted and pick color from color bar.
many video tutorials for inkscape . This channel has some.
Hope it helps.

The paths! That was it!

Thank You so much!

I started out using a trial version of Adobe Illustrator, and (to me), that was a little bit more user friendly than Inkscape. I uploaded a few with that, and failed on some other decals with that program as well. I didn't want to pay for the complete version, so when the trial ran out I went with Inkscape.
With the help of those video tutorials, I'm getting to know Inkscape a bit better. This graphic art stuff is far more complicated than I thought it would be.

When I get the car finished up later today (hopefully), I think I'll post it up so you can see what all the trouble was about. A very minor detail in truth, but I felt it was necessary to what I wanted to do.

Thanks again!!

 

[MisterWaffles]

Hey guys, I'm doing a request today and I'm going to need this logo done with the CORE part transparent, and the black masking cropped as close to the letters as possible. I'm also going to need the white "racing" part separate from the rest of the logo. Thanks!

 

[Crazy Taylor]

Hey giys looking for a logo to finish GT-R in my style.
Tonnies logo

 

[MisterWaffles]

Hey giys looking for 2 logos to finish GT-R in my style.

BROEMMLER. Need just the text.
View attachment 740440
Tonnies logo.
View attachment 740441

Broemmler's already been done, you should take it off your request.

https://www.gran-turismo.com/us/gtsport/user/discover/search/decal/decal/2074276/4683752423657832976 (black)

https://www.gran-turismo.com/us/gtsport/user/discover/search/decal/decal/2074276/4692759621301961232 (white)

https://www.gran-turismo.com/us/gtsport/user/discover/search/decal/decal/2074276/4981003191123444240 (weblink)

 

[MatskiMonk]

Hey guys, can anyone help me with this decal? I tried to convert it but on the decal uploader says SVG format not valid...
Many thanks in advance!View attachment 740319

Adapted from a version I found online.

 

[MatskiMonk]

Hey guys, I'm doing a request today and I'm going to need this logo done with the CORE part transparent, and the black masking cropped as close to the letters as possible. I'm also going to need the white "racing" part separate from the rest of the logo. Thanks!

 

[K32]

Could someone try making (and uploading) the vents on the C11 as shown here:

and here (just google sauber C11 for more reference photos):

And the three pointed star (would need to be made manually, couldn't find a better photo):

Thanks!

EDIT: Found another reference image

 

[4 Door Luv]

Hey all, just wanted to know someone could create this livery for me on the Supra. Thanks

 

[Whiteshark90]

View attachment 740447

Adapted from a version I found online.

Thank you very much mate!

 

[Bigjohn81]

View attachment 740703 View attachment 740703

Is the any chance someone could make these decals for ps4. I trying make the car in the pic but I can't find any matching decals. I know it a lot to ask,
just wish I could make them myself. Thx in advance.

 

[DublDee]

Not sure if anyone can help me here, but I'm trying to get these files converted to SVG and upload to GTS, but everything I've tried results in failure! If anyone can upload these for me, that would be awesome.

 

[Maninashed]

Hey giys looking for a logo to finish GT-R in my style.
Tonnies logo
View attachment 740441

One Tonnies.

 

[MatskiMonk]

edit: Tree'd

What are the chances

Hey giys looking for a logo to finish GT-R in my style.
Tonnies logo
View attachment 740441

 

[MatskiMonk]

@Maninashed

You working on any of the others at the moment?