Official GTPlanet decals available here!

[Tom]

Just ordering a couple of these. Should go nicely on the Fiat and suitcase!

 

[jay*doc]

Can't get mine to come apart from the plastic-y bit (onto the white paper) cleanly.

Any tips/suggestions?

Hello, sorry for the delay in response, did you get it to work? What color did you order, we did have a report of a white decal being hard to release from the liner for a local customer. I can also suggest putting the decal face down and removing the liner off the decal, rather than the decal off the liner, sometimes this works better.

Please feel free to contact me at jason.huber@mygraphicdesigner.co for more help or if you need a replacement.

 

[Hayden]

Can't get mine to come apart from the plastic-y bit (onto the white paper) cleanly.

Any tips/suggestions?

I found that laying the sticker face down and using the supplied card to force it down while pulling the clear backing was easiest. It's hard to describe what I'm trying to say, so here's a photo.

Basically get it like that then push it down and grab a little bit of the plastic at a time to slowly walk it backwards. Watch closely and if a piece isn't cooperating grab another card and go in from the other side to push the letter down while continuing to walk the plastic back with your other hand. Definitely use the cards supplied if possible because they do a great job.

It's a slow process until you get used to it but I found it to be the best way of removing the backing.

 

[heingericke]

I think I'll have to get one soon. I'll settle for a gtplanet car freshener for now.

 

[Smurfybug]

@nascarfan1400 @BRRT_Angel We should get the series logos done!

 

[nascarfan1400]

@nascarfan1400 @BRRT_Angel We should get the series logos done!

No.

 

[Smurfybug]

No.

ok

 

[Dennisch]

Being subtle is the keyword, I guess.

Only one orb refused to stick with the others while applying. But that was a quick fix.

But hawtdawg, it looks good and it must at least add another 10 hp!

 

[heingericke]

Got me a new one.

 

[ryzno]

Hi @jay*doc. How much extra would it cost to get the member name in the same font included with the stacked logo?

 

[synchromesh]

Well, mine turned out great @jay*doc

Never has a window sticker been so hard to use.
Edit: turns out the letters are weak, too.

I tried to be as careful as I could.

 

[jay*doc]

Well, mine turned out great @jay*doc

I am sorry you had an issue, I have also responded to your email. This is not the norm whatsoever, but every once in a while, there are issues.

Replacement going out in tomorrow's mail.

 

[jay*doc]

Hi @jay*doc. How much extra would it cost to get the member name in the same font included with the stacked logo?

I can do that. Send me an email at Jason.huber@mygraphicdesigner.co (.co, not .com)

 

[Tom]

I lost a few dots, and one side is a bit wonky. But, it worked!

 

[synchromesh]

I lost a few dots, and one side is a bit wonky. But, it worked!

View attachment 446287

Same thing happened to me twice. @jay*doc i really think something is wrong here. I love your designs and you want what's best for your customers but they got to be better build quality man.
Edit: that or we're both taking them off wrong.

 

[Hayden]

How did you try doing it @synchromesh? I had lots of trouble until I figured out this technique. It still requires lots of care and patience but is definitely a very effective method.

I found that laying the sticker face down and using the supplied card to force it down while pulling the clear backing was easiest. It's hard to describe what I'm trying to say, so here's a photo.
View attachment 407208
Basically get it like that then push it down and grab a little bit of the plastic at a time to slowly walk it backwards. Watch closely and if a piece isn't cooperating grab another card and go in from the other side to push the letter down while continuing to walk the plastic back with your other hand. Definitely use the cards supplied if possible because they do a great job.

It's a slow process until you get used to it but I found it to be the best way of removing the backing.

 

[synchromesh]

How did you try doing it @synchromesh? I had lots of trouble until I figured out this technique. It still requires lots of care and patience but is definitely a very effective method.

I'm gonna try that but I've never had a sticker do this, it shouldn't be this hard.

 

[Brend]

Ordered! ...I think, paid with paypal but didn't get an order confirmation screen on the website.

 

[Mike-ZENKAI]

Ordered GTP stickers on the 21st of October and received today in good order in The Netherlands.

They look great. Thanks, @jay*doc

 

[Casey]

Just ordered myself one!

 

[Casey]

Realized i could just edit the pictures in my bad delete this.

 

[Lameonade]

Just ordered one white horizontal for the Focus. 👍

 

[Lameonade]

It finally came! Nevermind the dirt.

EDIT: Ordered another white horizontal for the other side and an etched glass stacked for whatever else I think to put it on.

 

[Nismonath5]

I have just placed an order for some stickers, will be going on my two racecars for the upcoming New Zealand 24 hours of Lemons!

 

[Lameonade]

I noticed the domain doesn't seem to exist anymore. Is there no way to purchase decals anymore, @jay*doc ?

 

[Fastcarguy]

I noticed the domain doesn't seem to exist anymore. Is there no way to purchase decals anymore, @jay*doc ?

Looks like he hasn't logged on since October 2016. Probably out of luck for official stickers. If you have a high resolution picture of the logo you could probably have some made for yourself.

 

[Jordan]

Yeah, @jay*doc is no longer producing the stickers for us. I have some new ones and will be adding them to the store soon, but you can send me a PM if you want to go ahead and order one now.