- 122
Hi,
This is PS4 related, unless otherwise mentioned.
I have a ProSim handbrake (usb) and I soldered the 4 wires on the potmeter which has a RJ12 connector.
I think the wiring is good, the hb is recognized since it's just only a potmeter doing the job, just like fanatec's own hb.
2 things:
1. when connected to the base, Dirt Rally 2.0 only registers it as a digital button
2. when connected to the usb hub from the loadcell pedal, DR 2.0 registers it as an analog hb, but......
when I pull the lever only 25%, the game registers it as already 100%.
Same happens when I connect the wheel to the pc, but on pc I can manually calibrate it the right way.
2 months ago I used a drivehub the connect the hb to the ps4. Same happened, but then when I pulled the lever all the way, in
the meantime the console registered 4 times the same 25% in a row.
I don't know if someone managed it to get this done the right way. I would like to hear from you.
TIA
This is PS4 related, unless otherwise mentioned.
I have a ProSim handbrake (usb) and I soldered the 4 wires on the potmeter which has a RJ12 connector.
I think the wiring is good, the hb is recognized since it's just only a potmeter doing the job, just like fanatec's own hb.
2 things:
1. when connected to the base, Dirt Rally 2.0 only registers it as a digital button
2. when connected to the usb hub from the loadcell pedal, DR 2.0 registers it as an analog hb, but......
when I pull the lever only 25%, the game registers it as already 100%.
Same happens when I connect the wheel to the pc, but on pc I can manually calibrate it the right way.
2 months ago I used a drivehub the connect the hb to the ps4. Same happened, but then when I pulled the lever all the way, in
the meantime the console registered 4 times the same 25% in a row.
I don't know if someone managed it to get this done the right way. I would like to hear from you.
TIA
