TheeFrogmanlego
(Banned)
- 1,546
- Downey
- frogmanlego
The major draw back to this is the time required is CRAZY its almost 5-6 min's to glitch in...
Red Bull Interior Glitch tutorial
- Thread starter gtuned
- 154 comments
- 34,621 views
kttheman001
(Banned)
- 837
- usa
- kttheman001
This glitch is really simply amazing, wow. So far ive only been able to get half way through the roof of the g37 but i cant on the itialia.
- 2,028
- Poland
- Ultimetal
It never took longer than 2 minutes for me.
But, if you 'aimed' your car to the wrong place... Yeah, it's a pain.
CAMAROBOY69
Premium
- 18,567
- Michigan
- CAMAROBOY69
A lot of amazing pics in this thread. So much attention to detail. Makes me wonder why they dont allow you to take interior shots without this glitch.
- 2,006
- Port Washington
- GTP_skeeter23
The ability to "glitch in" during a race would be great...
- 93
- Canada
- sidewaysfordays
I've noticed that in some places the carbon fibre look is 'achieved' with a chincy checker pattern, and in others it looks like a weave. I wonder why?
- 4,035
- Gothenburg
- Agremont
You must be doing something wrong because to me it only takes a minute or two.
When you're on the roof and go into camera mode, you don't really have to bother about pressing select twice quickly. I just press them slowly and then move the car itself if the camera goes outside.
Last edited:
- 2,006
- Port Washington
- GTP_skeeter23
sidewaysfordays
Probably has to do with some surfaces having a thick gloss resin coat and others being more "raw"... Just my guess.
kttheman001
(Banned)
- 837
- usa
- kttheman001
Anyone give me a few pointers? Im trying on my acr but i end up in front, in back, on the sides, or it simply wont go down any further no matter if i keep hitting select on the camera or not or if i move the car, i just sit on the roof.
- 2,006
- Port Washington
- GTP_skeeter23
kttheman001
When you glitch through the walkway make sure by looking down that you can see your car... Advance until when you look down you can only see the rear most edge if it
.. then go what you would think is about 3-4ft (1 meter?) And drop down.... Once inside the box make sure you use the left down analog while pressing select repeatedly... Boom! Yur in ;-)
TheeFrogmanlego
(Banned)
- 1,546
- Downey
- frogmanlego
The Gtr Schulze , is that 2.06 or 2.05?? If i recall the car looked unacceptable inside , the wires were just a sloppy grey texture with purple squiggly lines , looked like they fixed it with 2.06 and if not WOW! did you PS ?.. .Nissan Schulze motorsport
]
* ps i have picture of how bad it looked*
- 5,999
- Over there
- ask me
So I'm noticing interior shots in new locations like Kyoto and the plaza..
obviously I'm curious if anyone can explain new techniques to use at the locations and are we able to glitch in from all locations(pit lane is more than likely not going to work)
I know some shots were edited..but HaerBev has stated that his work here were glitches
obviously I'm curious if anyone can explain new techniques to use at the locations and are we able to glitch in from all locations(pit lane is more than likely not going to work)
I know some shots were edited..but HaerBev has stated that his work here were glitches
- 1,427
- Italy
Are old photos before 2.05
- 250
- pug106maxi
Jaguar XJR-9 LM Race Car 88
obsessive rules
(Banned)
- 2,002
- CARLISLEcumbria
- warmachine277-
Here's one of my veyron.
Last edited:
- 1,492
- Germany
- KiroKai
- KiroKai
The opening post's video tutorial link is dead, the uploader has closed his YouTube account.
I tried this glitch at different locations. Bern did not work (would've been lovely to shoot your interior with some of the red trams passing by in the background), neither did any else I tried except Kyoto Gion and Lucerne. Now that I've seen the video from Lucerne above, I pretty much did the same, had trouble to get it working with small cars though. And by small I mean the Scion FR-S.
Will try the position shown and see if it helps with smaller cars.
In Kyoto, you basically do the same as in Lucerne, it's even easier. Direct the car to the bridge the man is standing on until you "hit" the invisible wall with the front, move to the back end of your car and begin the stick-up-pressing-and-select-hitting thing, after less than 10 seconds it should work. I only tested that location with a LP560-4 and a SLS though, not sure if there are any differences when trying especially wide/huge/big/small cars.
I tried this glitch at different locations. Bern did not work (would've been lovely to shoot your interior with some of the red trams passing by in the background), neither did any else I tried except Kyoto Gion and Lucerne. Now that I've seen the video from Lucerne above, I pretty much did the same, had trouble to get it working with small cars though. And by small I mean the Scion FR-S.
Will try the position shown and see if it helps with smaller cars.In Kyoto, you basically do the same as in Lucerne, it's even easier. Direct the car to the bridge the man is standing on until you "hit" the invisible wall with the front, move to the back end of your car and begin the stick-up-pressing-and-select-hitting thing, after less than 10 seconds it should work. I only tested that location with a LP560-4 and a SLS though, not sure if there are any differences when trying especially wide/huge/big/small cars.
- 422
- Wroclaw
- fifomaniak
Kyoto Shoren-In also works. Choose location 'C' and push the car facing forwards in the direction of other parked cars. Worked for me with 458 Italia and old Challenger.
obsessive rules
(Banned)
- 2,002
- CARLISLEcumbria
- warmachine277-
Can you do this on track?
gamerdog6482
(Banned)
- 6,233
- Venom, USA
- Gamerdog6482
Just tried this with a Lancer and it worked! I'll try to upload the picture I took.
Similar threads
