RIDOX Replica Garage-In Memory of TurnLeft-GT40,300ZX,F430,TVR,AEM S2000,Cizeta,TransAm Doug Nash

  • Thread starter Ridox2JZGTE
  • 5,032 comments
  • 908,252 views
One of my old replicas, will be posted soon :)

Mugen CIVIC SSR /
TEIN ATS ED Cars - Tokai PALLAS : Driver T. Matsui ( Civic One Make Series )

MugenCivicSSRTeinCivicFD2.jpg


Fuji Speedway F_16.jpg


Twin Ring Motegi Road Course_6.jpg


Suzuka Circuit_16.jpg


500_011.jpg
 
Last edited:
Hey, Quick question, what GT6 tires do you think would be realistic for a '66 GT40 racing at LeMans.

There's no lap time to compare yet, searching ..... :( Older racing tire were not as grippy as modern slick. I would start by finding lap time at shorter track like Laguna Seca, if there's one. I think fitting CS or SH is a good start.

It seems after my experience building GT4 replicas and taking consideration of the my older build like the FD2 Civic Type R One Make Race Car above ( modern period cars ), Sports Medium or between SM and SS ( depend on cars ) roughly simulate modern hard compound slick. Most of my GT4 uses SS, and most of them can be 2 to 4 seconds quicker than real life qualifying lap at Silverstone GP.
 
Team Kunimitsu NSX GT2
LM Replica 1995 GT2 Class Winner No 84
Keiichi Tsuchiya, Akira Iida and Kunimitsu Takahashi

Tuned to replicate Team Kunimitsu NSX GT2
Sports Medium to Racing Hard




CAR : Acura NSX LM Race Car '91
Tire : Sports Medium to Racing Hard


Specs
Horsepower: 380 HP at 8500 RPM
Torque : 272.2 ft-lb at 6500 RPM
Power Limiter at : 96.4%
Weight: 1045 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 46 / 54
Performance Points: 518


GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED IN THIS BUILD ) - MANDATORY
Wheels : Standard
Car Paint : Formula Red or any solid red.
Driver Number : 84, Font Type B


Tuning Parts Installed :
Engine Tuning Stage 2
Racing Exhaust
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Fully Customizable Suspension
Racing Brakes Kit



Suspension - EIBACH Springs with Dynamic Damper
High Camber

Front, Rear

Ride Height: 110 110
Spring Rate: 16.07 14.84
Dampers (Compression): 4 6
Dampers (Extension): 5 5
Anti-Roll Bars: 3 3
Camber Angle: 3.2 2.0
Toe Angle: 0.16 0.32

Suspension - EIBACH Springs with Dynamic Damper - Special Non Body Rigidity Version
High Camber

Front, Rear

Ride Height: 110 110
Spring Rate: 16.07 14.84
Dampers (Compression): 5 7
Dampers (Extension): 6 6
Anti-Roll Bars: 3 3
Camber Angle: 3.2 2.0
Toe Angle: 0.16 0.32



LSD - 1.5 way Hewland LSD
Initial Torque : 30
Acceleration Sensitivity: 30
Braking Sensitivity: 15


DOG CLUTCH TRANSMISSION - HEWLAND 5 Speed Sequential Gearbox with LLS Type Catalogue Ratio and Final
Install all power parts
Set Default
Set Final to 5.500
Set Auto Max Speed at 210kmh / 130mph
Adjust each gear :
1st 2.846
2nd 2.063
3rd 1.611
4th 1.320
5th 1.081
Set Final to 3.444

AERO
Front : 150
Rear : 300


Brake Balance:
3/3 ( personal BB) or for ABS 0 wheel : 3/3, for ABS 1 - feel free to use your preferred brake balance.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 3/3 brake balance as starting point.


Notes :


The NSX GT2 was entered in 1995 Le Mans, the car number 84 driven by Akira Iida, Kunimitsu Takahashi, and Keiichi Tsuchiya. It became the class winner.

This replica is based on that same car. I did a lot of research to find details and specs. Some of them can't be achieved accurately. There have been different weight figure, 1043kg and 1050kg. The GT6 NSX LM can only go as low as 1045kg. Power is at 380HP, but later on the NSX GT2 with different chassis has 400HP power in 2001 when it raced in European Endurance series. The Gran Turismo version on PSX has 549HP power and 1050kg. This power level can't be achieved in GT6.

I based the suspension on the 2001 update NSX GT2 to compete with modern race car spec. The suspension uses Eibach springs and Dynamic Damper System. I set the spring rate to similar ratio as used on JGTC NSX as the value range is not reachable in GT6. This should give similar handling albeit at softer overall rate. I have also setup the damper, ARB and alignment to work with the extra rigidity applied and include a damper setup for non body rigidity for those who don't want to apply the irreversible upgrade.

LSD is 1.5 way, with high preload and lock to ensure stability. Gearing is based on Hewland 5 Speed Sequential as it used on 1995 Le Mans. I adapted the current Hewland offering of 5 speed sequential for MR cars, the ratio and finals are taken from the Hewland catalogue, aimed to replicate the top speed during the race at close to 280kmh.

The NSX GT2 Team Kunimitsu has been tuned and tested at La Sarthe, Silverstone GP, Special Stage Route 5 and Motegi East Course. It can lap SSR5 in 1:28s and Motegi East in 1:27s on SM tires.





ENJOY :cheers:


View attachment 204181 View attachment 204182 View attachment 204183 View attachment 204184 View attachment 204185



Good replica,quite difficult to drive,but i'm used to it already - 4:12.3 at De La Sarthe with room to go 4:11.0,max speed 273 kph.
 
BMW Z4 GT3 '11 600PP
Tuned on Racing Hard






CAR : BMW Z4 GT3 '11
Tire : Racing Hard


Specs
Horsepower: 534 HP at 8500 RPM
Torque: 399.0 ft-lb at 5500 RPM
Power Limiter at : 100%
Weight: 1190 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 48 / 52
Performance Points: 600



GT AUTO
Oil change
Wheels : Standard
Car Paint : Standard



Tuning Parts Installed :
Racing Exhaust
Suspension Fully Customizable Kit
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Racing Brakes Kit



AERO
Front : 350 ( stock )
Rear : 730 ( stock ) --- adjust according to track, running max aero is preferable.



LSD ( 2 way medium preload )
Initial Torque : 19
Acceleration Sensitivity: 46
Braking Sensitivity: 46



Suspension
Front, Rear
Ride Height: 75 80
Spring Rate: 13.27 15.58 --- alternative stiffer rate : F 17.27 R 20.25
Dampers (Compression): 7 6
Dampers (Extension): 9 5
Anti-Roll Bars: 7 5
Camber Angle: 0.0 0.0
Toe Angle: -0.04 0.16



Transmission
Stock gearing and final, I would recommend adjust final according to the track.



Brake Balance:
9/8 ( personal BB) or for ABS 0 wheel : 3/2, for ABS 1 8/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/6 brake balance as starting point.



Notes :


Wow, I have heard this car is unruly and a beast to drive :lol:, so I bought it and drove it, to my surprise it was one of the easiest GT3 car ( similar to SLS AMG GT3 ) :D. I did simple suspension and LSD tweak to make it even more fun while easy to drive ( well for me :lol: ). Tested and tuned at Brands Hatch GP and Mt Panorama Bathurst. With above tune, it managed 1:22s at Brands Hatch GP and easy consistent 2:07s at Bathurst.

The Z4 has very sharp handling, nimble in low speed corners, be smooth and steady, trail braking is highly advised for better lap times.


Hello, you think the ride height 55 59 to Spa is too low?
 
Hello, you think the ride height 55 59 to Spa is too low?

Yes, you might bottom out on eau rouge, the down then up hill climb after 1st corner. If you are running low aero or stiff springs, you might do okay with 55 59. You should do fine using my tune, but avoid hitting curbs.
 
Yes, you might bottom out on eau rouge, the down then up hill climb after 1st corner. If you are running low aero or stiff springs, you might do okay with 55 59. You should do fine using my tune, but avoid hitting curbs.
Indeed, but i'm not sure if its too soft or too stiff, have to do some more tests.
 
Mustang GT S197
Blue Moon Control Freak IRS / Cortex Racing Xtreme-Grip Watt's Link
" COOKIE CUTTER PONY "

Special Build Mustang GT S197 450PP
Comfort Soft to Sports Medium



Autumn Ring_74.jpg



CAR : Ford Mustang GT '05
Tire : Comfort Soft to Sports Medium


Specs - 57/43 distribution
Horsepower: 273 HP at 5900 RPM
Torque : 331.7 ft-lb at 4300 RPM
Power Limiter at : 71.8%
Weight: 1450 kg
Ballast : 195 kg
Ballast Position : +39
Weight Distribution : 57 / 43 - as in real life
Performance Points: 450

Specs - 55/45 distribution
Horsepower: 273 HP at 5900 RPM
Torque : 331.7 ft-lb at 4300 RPM
Power Limiter at : 71.8%
Weight: 1450 kg
Ballast : 195 kg
Ballast Position : 50
Weight Distribution : 55 / 45 - as in real life
Performance Points: 450


GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED IN THIS BUILD )
Wheels : +2 Inch Up RAYS TE37SL in Silver Chrome
Car Paint : Red or Isotope Green


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Racing Exhaust
Catalytic Converter Sports
Twin Plate Clutch
Adjustable LSD
Carbon Drive Shaft
Fully Customizable Dog Clutch Transmission
Fully Customizable Suspension
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction

Nürburgring Nordschleife_68.jpg

Suspension - Blue Moon Control Freak IRS Kit + Bilstein Damper and Eibach Springs 500/500
Personal Setup

Front, Rear

Ride Height: 100 100
Spring Rate: 8.93 8.93
Dampers (Compression): 5 7
Dampers (Extension): 4 5
Anti-Roll Bars: 5 2
Camber Angle: 1.8 0.2
Toe Angle: 0.18 0.04


Suspension - Cortex Racing Xtreme-Grip Spec Kit with Koni Front Struts + Coilover Watt's Link Rear 500/400

Front, Rear
Ride Height: 100 100
Spring Rate: 8.93 7.14
Dampers (Compression): 5 7
Dampers (Extension): 4 5
Anti-Roll Bars: 5 2
Camber Angle: 1.8 0.2
Toe Angle: 0.18 0.04


DOG CLUTCH TRANSMISSION - TREMEC TR6060 Close Ratio with Custom Final
Install all power parts
Set Default
Set Final to 3.556
Set Auto Max Speed at 420kmh / 261mph
Adjust each gear :
1st 2.660
2nd 1.780
3rd 1.300
4th 1.000
5th 0.800
6th 0.630
Set Final to 4.900 - Use lower final for more top speed or higher for lower top speed


LSD - 2 Way Carbon Clutch Ford Racing Traction-Lok Custom LSD
Initial Torque : 27
Acceleration Sensitivity: 29
Braking Sensitivity: 29

City of Arts and Sciences - Night_57.jpg


Brake Balance:
3/5 ( personal BB) or for ABS 0 wheel : 3/5, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 3/5 brake balance as starting point.
Notes :

This car was originally built as replica of a Mustang race car, but I decided to tune it for a set PP level.

From research, I found several different weight distribution figure from 57/43, 55/45 and 52/48. In this 450PP build, I provided 2 set, 57/43 and 55/45 and 52/48 is not possible. Power is modest 273HP with 1450kg weight. Nothing fancy, hence the name cookie cutter pony :lol:

The Mustang has 2 set suspension based on 2 different setup, one is based on Blue Moon Control Freak IRS Kit for the rear end and the other is Cortex Racing Xtreme-Grip Kit similar to their SCAA Spec Mustang setup. Both setup works well on all weight distribution as I setup suspension for all around performer.

The LSD is setup with high preload and high lock to maintain stability and traction, roughly based on Traction-Lok Ford Racing Differential with custom Carbon Clutch upgrades. Not really accurate, but it perform exceptionally well even on comfort/street tires.

For gearing, I adapted Tremec TR6060 Close Ratio gearbox with custom final. The 4.900 final allows lower top speed and rapid acceleration.

The Cookie Cutter Pony was tuned and tested mainly at Tsukuba. The 450PP was able to lap in 1:05s range on comfort soft at Tsukuba using Control Freak IRS + 55/45, pretty decent for a Mustang. It has also been test driven at Bathurst and Nordschleife, and it drives quite well without much drama.

I have also included a replay of the 1:05s lap at Tsukuba which should be good for reference.


ENJOY :cheers:


UPDATE : Fixed 57/43 ballast position.


 

Attachments

  • MustangGT1m05sTsukuba.zip
    266.8 KB · Views: 13
Last edited:
Mugen CIVIC SSR
TEIN ATS ED Cars / Tokai PALLAS
T. Matsui FD2 Civic Type R
Civic One Make Series Race Car Replica

Tuned to replicate Matsui FD2 Civic One Make Champion Car
Sports Soft


mugencivicssrteincivicfd2-jpg.205768




CAR : Honda Civic Type R FD2 '08
Tire : Sports Soft


Specs
Horsepower: 235 HP at 8000 RPM
Torque : 175.6 ft-lb at 6500 RPM
Power Limiter at : 91.8%
Weight: 1220 kg
Ballast : 116 kg
Ballast Position : -22
Weight Distribution : 60 / 40 - as in real life ( closest info I can get )
Performance Points: 426


GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED IN THIS BUILD ) - MANDATORY - real one make civic has roll cage.
Wheels : Standard Size RAYS 57Gainer or BBS RE-MG or ENKEI RS05RR or GT-Ab12 in Silver
Car Paint : Pure White or any solid white.


Tuning Parts Installed :
Sports Computer
Racing Exhaust
Twin Plate Clutch
Adjustable LSD
Fully Customizable Suspension
Weight Reduction Stage 2
Racing Brakes Kit

twin-ring-motegi-road-course_6-jpg.206385

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Personal Setup

Front, Rear

Ride Height: 97 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 3.0 2.5
Toe Angle: 0.08 -0.08


Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Visual Ride Height + Race Spec Camber

Front, Rear

Ride Height: 100 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 3.0 2.5
Toe Angle: 0.08 -0.08

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Visual + Medium Camber

Front, Rear

Ride Height: 100 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 1.0 2.2 ( Optional Rear : 1.50 )
Toe Angle: 0.08 -0.08

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Visual + Low Camber

Front, Rear

Ride Height: 100 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 0.5 0.4
Toe Angle: 0.08 -0.08

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Equal Height + All Camber

Front, Rear

Ride Height: 75 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 10
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 3.0 2.5 ( Optional Medium : 1.0 2.2 or 1.0 1.5, Low : 0.5 04 )
Toe Angle: 0.08 -0.08

fuji-speedway-f_16-jpg.206384

LSD - 1 Way ATS Silent Type Metal LSD type R - Matsui Spec - 20 Disc/Plates High Lock Medium Preload
Initial Torque : 19
Acceleration Sensitivity: 47
Braking Sensitivity: 5


Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 3/4 brake balance as starting point.
Notes :

The Civic One Make Series was a long tradition in Japan which has been run for over 30 years. It stopped briefly in early to mid 2000's, replaced by Integra Series. With the return of FD2 Civic Type R, the series reignited with Civic back on the spotlight.

This particular replica is based on Championship winning car driven by T. Matsui, the Mugen/ATS/TEIN Tokai sponsored car fought a fierce battles throughout the years from 2008 to 2010 against Nobuteru Taniguchi and several other high profile race drivers. The winning formula is a good setup suspension and LSD as other variable are controlled in one make series ( power/weight/tires/gearbox )

After long research back in GT6 release days, I collected various information about the Civic Type R One Make model. The car was sold officially by Honda Japan at cheaper price - about 1.6 million Yen, compared to vanilla road going model at 2.6+ million Yen. The One Make FD2 omitted many parts from road going model, thus making it strictly track car. Most of road car requirements are gone :

Mechanical
* Helical Limited Slip Differential

Interior

* Honda R Spec seat
* Leather steering wheel
* Drivers metal foot rest
* I-SRS airbags for driver and passenger

Other Equipment

* HID headlights
* LED high mount stop lamp
* Full auto Air Conditioner
* Keyless entry system
* Security Alarm and Immobilizer
* Power Door Locks
* Passenger and rear seat
* All seatbelts
* Sun visors and vanity mirrors
* Center console
* Roof lining, carpet and all other lining
* Under car protective coating, tools, warning flare etc

This gives the Civic FD2 One Make much lower base weight when bought, but racing car preparation, like safety roll cage, suspension, LSD parts also add some fat to the car. The road going Civic Type R FD2 has about 61/39 weight distribution at 1260-1270kg. Removing AC cuts the weight to 1250kg. After some research about weight savings, I decided to use 1220kg and 60/40 distribution. This is a realistic figure based on about 50+kg saving from the omitted parts and added safety roll cage.

Power is based on several Honda Civic FD2 Type R One Make Race Car exported overseas, built by Mugen, the car was dynoed on engine dyno with 235HP output and slight torque increase across the board. This is possible due to the Mugen parts like ECU and Racing Exhaust. Redline should be at 9000 RPM.

The Mugen SSR/TEIN/ATS/Tokai Civic replica is fitted with TEIN Circuit Master Super Racing - Ultimate Spec Coilover, I chose this as the more preferred TEIN SRC Circuit Master Type N1 Damper base spring rate are not possible ( too high ). The TEIN SRC Ultimate Spec is specialized for circuit racing use, offering significant drop in ride height, 10kg/mm front springs and a host of rear springs options ( 8/10/12 kg/mm ). The real car uses lower rear ride height and slightly higher front ( 1 in higher ) to maintain weight balance under heavy cornering. This translate to 100/75 ride height and can be compared to the real car pictures, although the real car is a bit lower overall - about 10 to 20mm - not possible in GT6 as the lowest is 75mm :)

I have setup the damper, ARB, camber and toe to work on all spring rate combination and ride height. Try them all and choose one that suits you best. The real car suspension setup is best replicated using my personal setup suspension listed at the top above, with high camber, and 97/75 ride height. Visuall ride height and camber has been replicated as well.

Gearing is stock as used on on make series, while LSD is special model build from Active Traction Service ( ATS ), this particular LSD is specially tuned to Mr. Matsui spec which help him winning several races. The ATS LSD is 1 way, based on Silent Type Metal disc model line up, with 20 disc/plates, 70 degree cam angle ( high lock ) giving distinct throttle induced car control freedom and medium preload at 8kg-m. The LSD can be setup for lower cam angle at 45 and 55 degree by cam ring rearrangement, I have provided both setup as options below :



LSD - 1 Way ATS Silent Type Metal LSD type R - Matsui Spec - 20 Disc/Plates -Optional 45 Cam Angle
Initial Torque : 19
Acceleration Sensitivity:31
Braking Sensitivity: 5

LSD - 1 Way ATS Silent Type Metal LSD type R - Matsui Spec - 20 Disc/Plates -Optional 55 Cam Angle
Initial Torque : 19
Acceleration Sensitivity: 37
Braking Sensitivity: 5


To get as close as possible to the real life performance, I used lap times record ( race and qualifying times ) at 3 different track that are available in GT6. Suzuka, Twin Ring Motegi Road Course and Fuji Speedway F are the 3 tracks that are regulars in Civic One Make Race Series. The tires is Sports Soft which is comparable to the Yokohama Advan Racing Slick used in the One Make Series ( most probably ADVAN A005 )

T. Matsui held the pole time record at Twin Ring Motegi with 2:10s lap and quickest race best times at low 2:12s, while at Fuji Speedway, race best times at low 1:57s and Suzuka race best times at 2:23s flat. The qualifying/pole record times at Fuji and Suzuka is unknown, but roughly about 1.5 to 2+seconds quicker than race best times. Expect the replica to lap in 1:55s at Fuji, 2:20s at Suzuka and 2:10s at Twin Ring Motegi Road Course.

I tuned and tested mainly at the those 3 tracks, and the replica can easily lap in 2:20s at Suzuka, 2:10s at Twin Ring Motegi Road Course and 1:55s at Fuji Speedway F.

Below are the 3 best lap replays of the track for reference.




Personal Setup Ride Height 97/75

suzuka-circuit_16-jpg.206475


500_011-jpg.206477




ENJOY :cheers:



500_01.jpg
500_04.jpg
500_05.jpg
500_07.jpg
art_src2.jpg
art_src3.jpg
art_src4.jpg
art_src5.jpg
art_src6.jpg
art_src7.jpg
art_src8.jpg
art_src9.jpg
art_src10.jpg
art_src.jpg
 

Attachments

  • FujiSpeedwayF1m55s.zip
    396 KB · Views: 17
  • TwinRingMotegi2m10s.zip
    438.5 KB · Views: 15
  • Suzuka2m20s.zip
    463.7 KB · Views: 14
Last edited:
Mustang GT S197
Blue Moon Control Freak IRS / Cortex Racing Xtreme-Grip Watt's Link
" COOKIE CUTTER PONY "

Special Build Mustang GT S197 450PP
Comfort Soft to Sports Medium




CAR : Ford Mustang GT '05
Tire : Comfort Soft to Sports Medium


Specs - 57/43 distribution
Horsepower: 273 HP at 5900 RPM
Torque : 331.7 ft-lb at 4300 RPM
Power Limiter at : 71.8%
Weight: 1450 kg
Ballast : 195 kg
Ballast Position : -39
Weight Distribution : 57 / 43 - as in real life
Performance Points: 450

Specs - 55/45 distribution
Horsepower: 273 HP at 5900 RPM
Torque : 331.7 ft-lb at 4300 RPM
Power Limiter at : 71.8%
Weight: 1450 kg
Ballast : 195 kg
Ballast Position : 50
Weight Distribution : 55 / 45 - as in real life
Performance Points: 450


GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED IN THIS BUILD )
Wheels : +2 Inch Up RAYS TE37SL in Silver Chrome
Car Paint : Red or Isotope Green


Tuning Parts Installed :
Engine Tuning Stage 1
Sports Computer
Racing Exhaust
Catalytic Converter Sports
Twin Plate Clutch
Adjustable LSD
Carbon Drive Shaft
Fully Customizable Dog Clutch Transmission
Fully Customizable Suspension
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction


Suspension - Blue Moon Control Freak IRS Kit + Bilstein Damper and Eibach Springs 500/500
Personal Setup

Front, Rear

Ride Height: 100 100
Spring Rate: 8.93 8.93
Dampers (Compression): 5 7
Dampers (Extension): 4 5
Anti-Roll Bars: 5 2
Camber Angle: 1.8 0.2
Toe Angle: 0.18 0.04


Suspension - Cortex Racing Xtreme-Grip Spec Kit with Koni Front Struts + Coilover Watt's Link Rear 500/400

Front, Rear
Ride Height: 100 100
Spring Rate: 8.93 7.14
Dampers (Compression): 5 7
Dampers (Extension): 4 5
Anti-Roll Bars: 5 2
Camber Angle: 1.8 0.2
Toe Angle: 0.18 0.04


DOG CLUTCH TRANSMISSION - TREMEC TR6060 Close Ratio with Custom Final
Install all power parts
Set Default
Set Final to 3.556
Set Auto Max Speed at 420kmh / 261mph
Adjust each gear :
1st 2.660
2nd 1.780
3rd 1.300
4th 1.000
5th 0.800
6th 0.630
Set Final to 4.900 - Use lower final for more top speed or higher for lower top speed


LSD - 2 Way Carbon Clutch Ford Racing Traction-Lok Custom LSD
Initial Torque : 27
Acceleration Sensitivity: 29
Braking Sensitivity: 29



Brake Balance:
3/5 ( personal BB) or for ABS 0 wheel : 3/5, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 3/5 brake balance as starting point.
Notes :

This car was originally built as replica of a Mustang race car, but I decided to tune it for a set PP level.

From research, I found several different weight distribution figure from 57/43, 55/45 and 52/48. In this 450PP build, I provided 2 set, 57/43 and 55/45 and 52/48 is not possible. Power is modest 273HP with 1450kg weight. Nothing fancy, hence the name cookie cutter pony :lol:

The Mustang has 2 set suspension based on 2 different setup, one is based on Blue Moon Control Freak IRS Kit for the rear end and the other is Cortex Racing Xtreme-Grip Kit similar to their SCAA Spec Mustang setup. Both setup works well on all weight distribution as I setup suspension for all around performer.

The LSD is setup with high preload and high lock to maintain stability and traction, roughly based on Traction-Lok Ford Racing Differential with custom Carbon Clutch upgrades. Not really accurate, but it perform exceptionally well even on comfort/street tires.

For gearing, I adapted Tremec TR6060 Close Ratio gearbox with custom final. The 4.900 final allows lower top speed and rapid acceleration.

The Cookie Cutter Pony was tuned and tested mainly at Tsukuba. The 450PP was able to lap in 1:05s range on comfort soft at Tsukuba, pretty decent for a Mustang. It has also been test driven at Bathurst and Nordschleife, and it drives quite well without much drama.

I have also included a replay of the 1:05s lap at Tsukuba which should be good for reference.


ENJOY :cheers:



|ib|Tour of America|450PP|SH/CS|Weight distribution 55/45 (preferred)|Suspension Blue Moon (preferred)|ABS 0 5/7 (Wheel)|Winner|

|A-Spec Seasonal 550PP - Silverstone GP|Winner|

Excellent! 👍

*Ballast Position for 57/43 weight distribution version, +39 and not -39 ;)
 
|ib|Tour of America|450PP|SH/CS|Weight distribution 55/45 (preferred)|Suspension Blue Moon (preferred)|ABS 0 5/7 (Wheel)|Winner|

|A-Spec Seasonal 550PP - Silverstone GP|Winner|

Excellent! 👍

*Ballast Position for 57/43 weight distribution version, +39 and not -39 ;)

Does the Blue Moon + 55/45 gives the best balance ? Less understeer/better rotation ? I'm glad the "cookie cutter pony" works :lol:

Thanks for the correction, the ballast position is fixed, now I need to fix the other two :D
 
Does the Blue Moon + 55/45 gives the best balance ? Less understeer/better rotation ? I'm glad the "cookie cutter pony" works :lol:

Thanks for the correction, the ballast position is fixed, now I need to fix the other two :D
The 57/43 isn't bad at all neither, just I feel better with the 55/45. :)

Which other two to fix?! :confused:
 
Mugen CIVIC SSR
TEIN ATS ED Cars / Tokai PALLAS
T. Matsui FD2 Civic Type R
Civic One Make Series Race Car Replica

Tuned to replicate Matsui FD2 Civic One Make Champion Car
Sports Soft


mugencivicssrteincivicfd2-jpg.205768




CAR : Honda Civic Type R FD2 '08
Tire : Sports Soft


Specs
Horsepower: 235 HP at 8000 RPM
Torque : 175.6 ft-lb at 6500 RPM
Power Limiter at : 91.8%
Weight: 1220 kg
Ballast : 116 kg
Ballast Position : -22
Weight Distribution : 60 / 40 - as in real life ( closest info I can get )
Performance Points: 426


GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED IN THIS BUILD ) - MANDATORY - real one make civic has roll cage.
Wheels : Standard Size RAYS 57Gainer or BBS RE-MG or ENKEI RS05RR or GT-Ab12 in Silver
Car Paint : Pure White or any solid white.


Tuning Parts Installed :
Sports Computer
Racing Exhaust
Twin Plate Clutch
Adjustable LSD
Fully Customizable Suspension
Weight Reduction Stage 2
Racing Brakes Kit

twin-ring-motegi-road-course_6-jpg.206385

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Personal Setup

Front, Rear

Ride Height: 97 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 3.0 2.5
Toe Angle: 0.08 -0.08


Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Visual Ride Height + Race Spec Camber

Front, Rear

Ride Height: 100 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 3.0 2.5
Toe Angle: 0.08 -0.08

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Visual + Medium Camber

Front, Rear

Ride Height: 100 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 1.0 2.2 ( Optional Rear : 1.50 )
Toe Angle: 0.08 -0.08

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Visual + Low Camber

Front, Rear

Ride Height: 100 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 8
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 0.5 0.4
Toe Angle: 0.08 -0.08

Suspension - TEIN SRC Super Racing Circuit Master Ultimate Spec Coilover F:10, R:8, 10, 12
Equal Height + All Camber

Front, Rear

Ride Height: 75 75
Spring Rate: 10.00 8.00 ( Rear Spring Options : 8.00, 10.00, 12.00 - all tested OK )
Dampers (Compression): 4 10
Dampers (Extension): 5 8
Anti-Roll Bars: 4 6
Camber Angle: 3.0 2.5 ( Optional Medium : 1.0 2.2 or 1.0 1.5, Low : 0.5 04 )
Toe Angle: 0.08 -0.08

fuji-speedway-f_16-jpg.206384

LSD - 1 Way ATS Silent Type Metal LSD type R - Matsui Spec - 20 Disc/Plates High Lock Medium Preload
Initial Torque : 19
Acceleration Sensitivity: 47
Braking Sensitivity: 5


Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 3/4 brake balance as starting point.
Notes :

The Civic One Make Series was a long tradition in Japan which has been run for over 30 years. It stopped briefly in early to mid 2000's, replaced by Integra Series. With the return of FD2 Civic Type R, the series reignited with Civic back on the spotlight.

This particular replica is based on Championship winning car driven by T. Matsui, the Mugen/ATS/TEIN Tokai sponsored car fought a fierce battles throughout the years from 2008 to 2010 against Nobuteru Taniguchi and several other high profile race drivers. The winning formula is a good setup suspension and LSD as other variable are controlled in one make series ( power/weight/tires/gearbox )

After long research back in GT6 release days, I collected various information about the Civic Type R One Make model. The car was sold officially by Honda Japan at cheaper price - about 1.6 million Yen, compared to vanilla road going model at 2.6+ million Yen. The One Make FD2 omitted many parts from road going model, thus making it strictly track car. Most of road car requirements are gone :

Mechanical
* Helical Limited Slip Differential

Interior

* Honda R Spec seat
* Leather steering wheel
* Drivers metal foot rest
* I-SRS airbags for driver and passenger

Other Equipment

* HID headlights
* LED high mount stop lamp
* Full auto Air Conditioner
* Keyless entry system
* Security Alarm and Immobilizer
* Power Door Locks
* Passenger and rear seat
* All seatbelts
* Sun visors and vanity mirrors
* Center console
* Roof lining, carpet and all other lining
* Under car protective coating, tools, warning flare etc

This gives the Civic FD2 One Make much lower base weight when bought, but racing car preparation, like safety roll cage, suspension, LSD parts also add some fat to the car. The road going Civic Type R FD2 has about 61/39 weight distribution at 1260-1270kg. Removing AC cuts the weight to 1250kg. After some research about weight savings, I decided to use 1220kg and 60/40 distribution. This is a realistic figure based on about 50+kg saving from the omitted parts and added safety roll cage.

Power is based on several Honda Civic FD2 Type R One Make Race Car exported overseas, built by Mugen, the car was dynoed on engine dyno with 235HP output and slight torque increase across the board. This is possible due to the Mugen parts like ECU and Racing Exhaust. Redline should be at 9000 RPM.

The Mugen SSR/TEIN/ATS/Tokai Civic replica is fitted with TEIN Circuit Master Super Racing - Ultimate Spec Coilover, I chose this as the more preferred TEIN SRC Circuit Master Type N1 Damper base spring rate are not possible ( too high ). The TEIN SRC Ultimate Spec is specialized for circuit racing use, offering significant drop in ride height, 10kg/mm front springs and a host of rear springs options ( 8/10/12 kg/mm ). The real car uses lower rear ride height and slightly higher front ( 1 in higher ) to maintain weight balance under heavy cornering. This translate to 100/75 ride height and can be compared to the real car pictures, although the real car is a bit lower overall - about 10 to 20mm - not possible in GT6 as the lowest is 75mm :)

I have setup the damper, ARB, camber and toe to work on all spring rate combination and ride height. Try them all and choose one that suits you best. The real car suspension setup is best replicated using my personal setup suspension listed at the top above, with high camber, and 97/75 ride height. Visuall ride height and camber has been replicated as well.

Gearing is stock as used on on make series, while LSD is special model build from Active Traction Service ( ATS ), this particular LSD is specially tuned to Mr. Matsui spec which help him winning several races. The ATS LSD is 1 way, based on Silent Type Metal disc model line up, with 20 disc/plates, 70 degree cam angle ( high lock ) giving distinct throttle induced car control freedom and medium preload at 8kg-m. The LSD can be setup for lower cam angle at 45 and 55 degree by cam ring rearrangement, I have provided both setup as options below :



LSD - 1 Way ATS Silent Type Metal LSD type R - Matsui Spec - 20 Disc/Plates -Optional 45 Cam Angle
Initial Torque : 19
Acceleration Sensitivity:31
Braking Sensitivity: 5

LSD - 1 Way ATS Silent Type Metal LSD type R - Matsui Spec - 20 Disc/Plates -Optional 55 Cam Angle
Initial Torque : 19
Acceleration Sensitivity: 37
Braking Sensitivity: 5


To get as close as possible to the real life performance, I used lap times record ( race and qualifying times ) at 3 different track that are available in GT6. Suzuka, Twin Ring Motegi Road Course and Fuji Speedway F are the 3 tracks that are regulars in Civic One Make Race Series. The tires is Sports Soft which is comparable to the Yokohama Advan Racing Slick used in the One Make Series ( most probably ADVAN A005 )

T. Matsui held the pole time record at Twin Ring Motegi with 2:10s lap and quickest race best times at low 2:12s, while at Fuji Speedway, race best times at low 1:57s and Suzuka race best times at 2:23s flat. The qualifying/pole record times at Fuji and Suzuka is unknown, but roughly about 1.5 to 2+seconds quicker than race best times. Expect the replica to lap in 1:55s at Fuji, 2:20s at Suzuka and 2:10s at Twin Ring Motegi Road Course.

I tuned and tested mainly at the those 3 tracks, and the replica can easily lap in 2:20s at Suzuka, 2:10s at Twin Ring Motegi Road Course and 1:55s at Fuji Speedway F.

Below are the 3 best lap replays of the track for reference.




Personal Setup Ride Height 97/75

suzuka-circuit_16-jpg.206475


500_011-jpg.206477




ENJOY :cheers:



View attachment 208322 View attachment 208323 View attachment 208324 View attachment 208325 View attachment 208326 View attachment 208327 View attachment 208328 View attachment 208329 View attachment 208330 View attachment 208331 View attachment 208332 View attachment 208333 View attachment 208334 View attachment 208335

I've finished checking spec,got 8:07.5 at Nurburgring on SM tires and visual low camber suspension - the only thing that this car needs is going 10 kph faster xD

BTW When we can expect new race car replicas and what cars it will be?
 
I've finished checking spec,got 8:07.5 at Nurburgring on SM tires and visual low camber suspension - the only thing that this car needs is going 10 kph faster xD

BTW When we can expect new race car replicas and what cars it will be?

Be sure to drive the Civic at Suzuka, Fuji and Motegi on SS tire :) If you are driving on bumpy track, try the 10/8 spring rate. I will be posting GT4 car again next time I play, BMW M3 as well as some road cars replica ( Saleen Mustang ) and Focus ST.

The BMW M3 GT4 handles great, similar to the 370Z GT4, the M3 uses the Chrome Line model. Tested on SH tire, capable of sub 2:20s at Silverstone GP.
 
Be sure to drive the Civic at Suzuka, Fuji and Motegi on SS tire :) If you are driving on bumpy track, try the 10/8 spring rate. I will be posting GT4 car again next time I play, BMW M3 as well as some road cars replica ( Saleen Mustang ) and Focus ST.

The BMW M3 GT4 handles great, similar to the 370Z GT4, the M3 uses the Chrome Line model. Tested on SH tire, capable of sub 2:20s at Silverstone GP.

That's good to know,but i was counting at Audi TT VLN SP3 T Race Car
 
That's good to know,but i was counting at Audi TT VLN SP3 T Race Car

Sorry, I'm not accepting request at the moment :( I have about 3 or 4 cars under progress since last week, SLR McLaren Renntech GT, Masaki RX7 FD3S Wangan Midnight, Gallardo LP570 Superleggera and a Spoon themed Integra. I have about 30 cars completed waiting to be posted, and I barely can play everyday :( There are about 5 more GT4 cars yet to be posted, then some tarmac/dirt rally car from the 80's and 90's, vintage supercars with fixes and real life alignment, Amuse Carbon R with proper real life based setup, another GT3 car ( Italian ), Camaro IROC, Altezza Best Motoring, Silvia S13 G Master, Stratos Gr4 Rally, Supra Turbo Gr A, EVO IX Fortune Auto, HKS Hipermax cars, as well the rest of the Wangan Midnight and a Top Secret car :P
 
Sorry, I'm not accepting request at the moment :( I have about 3 or 4 cars under progress since last week, SLR McLaren, Masaki RX7 FD3S Wangan Midnight, and Gallardo LP570 Superleggera and a Spoon themed Integra. I have about 30 cars completed waiting to be posted, and I barely can play everyday :( There are about 5 more GT4 cars yet to be posted, then some tarmac/dirt rally car from the 80's and 90's, vintage supercars with fixes and real life alignment, Amuse Carbon R with proper real life based setup, another GT3 car ( Italian ), Camaro IROC, Altezza Best Motoring, Silvia S13 G Master, Stratos Gr4 Rally, Supra Turbo Gr A, as well the rest of the Wangan Midnight and a Top Secret car :P

So i'll wait for it and I really want to see these rally cars.
BTW You said that you've BMW M3 as GT4 replica,so what's this 4 other GT4s?
 
So i'll wait for it and I really want to see these rally cars.
BTW You said that you've BMW M3 as GT4 replica,so what's this 4 other GT4s?

M3 actually competed in GT4 Class :) Other GT4 that competed at some point : MX5 Miata, KTM Xbow, BMW Z4, Ford Mustang Boy Racer GT4 ( using BOSS 302 ), Aston Martin Vantage and a Porsche :P

The rally cars are not really replica, but I tried to get as close as possible in specs :) I got Peugeot 106, Audi Quattro, Mercedes 190E, Supra 3.0 GT, Stratos, and old gen Lancer Evo ( Evo I to III ) - most are aimed at tarmac.
 
"Some tarmac / dirt rally car"
Yes, please! I need some more replica rally cars to practice on.
I give you a lot of credit for my podium finishes at my local rallycross events. Being able to practice on a Legacy in the game is a huge advantage over my competition. 👍
 
Hi Ridox , how are you ? This thread is a great job from you and look really serious, I like it. I would like to know if you are into drifting and if you did or will consider to do drift replica ?
 
"Some tarmac / dirt rally car"
Yes, please! I need some more replica rally cars to practice on.
I give you a lot of credit for my podium finishes at my local rallycross events. Being able to practice on a Legacy in the game is a huge advantage over my competition. 👍

Podium finish :bowdown: :D

Hi Ridox , how are you ? This thread is a great job from you and look really serious, I like it. I would like to know if you are into drifting and if you did or will consider to do drift replica ?

I already posted some drift cars, although they are mildly tuned - Hakosuka, AMR MR2 AW11, AE86 and S14 Drift Bible :) I do drift from time to time :lol: One of my HKS Hipermax cars is a drift car and it's a Nissan :D
 
SALEEN S281 EXTREME 2007

Tuned to Replicate Saleen S281E 2007
Comfort Soft to Sports Medium



s281.jpg



CAR : Ford Mustang V8 GT Coupe Premium '07
Tire : Comfort Soft to Sports Medium


Specs - Racing Exhaust
Horsepower: 550 HP at 5800 RPM
Torque : 522.9 ft-lb at 5400 RPM
Power Limiter at : 97.1%
Weight: 1642 kg
Ballast : 192 kg
Ballast Position : 50
Weight Distribution : 56 / 44
Performance Points: 527

Specs - Stock Exhaust
Horsepower: 550 HP at 6400 RPM
Torque : 527.1 ft-lb at 5200 RPM
Power Limiter at : 99.2%
Weight: 1642 kg
Ballast : 192 kg
Ballast Position : 50
Weight Distribution : 56 / 44
Performance Points: 528


GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED IN THIS BUILD )
Aero : Aero Kits Type A
Wheels : +1 Inch Up PDI P525 or ENKEI SC05 in Silver Chrome
Car Paint : Red or Yellow or White or Black


Tuning Parts Installed :
Engine Tuning Stage 2 ( ONLY FOR RACING EXHAUST )
Engine Tuning Stage 3 ( ONLY FOR STOCK EXHAUST )
Sports Computer
Racing Exhaust ( REMOVE FOR STOCK EXHAUST )
Intake Tuning ( ONLY FOR RACING EXHAUST )
Isometric Exhaust Manifold ( ONLY FOR STOCK EXHAUST )
Catalytic Converter Sports
Twin Plate Clutch
Adjustable LSD
Carbon Drive Shaft
Fully Customizable Dog Clutch Transmission
Fully Customizable Suspension
Weight Reduction Stage 1


s281232.jpg

Suspension - SALEEN N2 RaceCraft Coilover with Live Rear Axle + Panhard Rod
Saleen Factory Alignment

Front, Rear

Ride Height: 105 115
Spring Rate: 6.00 5.50
Dampers (Compression): 6 8
Dampers (Extension): 5 6
Anti-Roll Bars: 5 2
Camber Angle: 2.0 0.0 ( Front Camber : -1.0 on each side )
Toe Angle: -0.47 0.00 ( Front Toe Out/Negative from 1/32 to 1/8 on each side : -0.12, -0.23, -0.47 )

Suspension - SALEEN N2 RaceCraft Coilover with Live Rear Axle + Panhard Rod
Ford Factory Alignment

Front, Rear

Ride Height: 105 115
Spring Rate: 6.00 5.50
Dampers (Compression): 6 8
Dampers (Extension): 5 6
Anti-Roll Bars: 5 2
Camber Angle: 0.8 0.0 ( Front Camber : -0.75 +- 0.75 )
Toe Angle: 0.10 0.00 ( Front Toe In 0.10 +- 0.20 )

Suspension - SALEEN N2 RaceCraft Coilover with Rear IRS Kit Control Freak Conversion
Track Alignment Low Camber

Front, Rear

Ride Height: 105 115
Spring Rate: 6.00 5.50
Dampers (Compression): 6 8
Dampers (Extension): 5 6
Anti-Roll Bars: 5 2
Camber Angle: 2.0 0.5
Toe Angle: 0.08 0.08
--Optional Toe Angle : -0.47 0.08 ( Front Toe Out/Negative from 1/32 to 1/8 on each side : -0.12, -0.23, -0.47 and Rear Toe In : 0.08 - 0.24 )

Suspension - SALEEN N2 RaceCraft Coilover with Rear IRS Kit Control Freak Conversion
Track Alignment High Camber

Front, Rear

Ride Height: 105 115
Spring Rate: 6.00 5.50
Dampers (Compression): 6 8
Dampers (Extension): 5 6
Anti-Roll Bars: 5 2
Camber Angle: 3.0 1.5
Toe Angle: 0.08 0.08
--Optional Toe Angle : -0.47 0.08 ( Front Toe Out/Negative from 1/32 to 1/8 on each side : -0.12, -0.23, -0.47 and Rear Toe In : 0.08 - 0.24 )


s281er.jpg


DOG CLUTCH TRANSMISSION - TREMEC T56 Close Ratio
Install all power parts
Set Default
Set Auto Max Speed at 390kmh / 242mph
Adjust each gear :
1st 2.970
2nd 2.070
3rd 1.430
4th 1.000
5th 0.840
6th 0.560
Set Final to 4.100


DOG CLUTCH TRANSMISSION - TREMEC TR6060 Close Ratio - OPTIONAL
Install all power parts
Set Default
Set Auto Max Speed at 390kmh / 242mph
Adjust each gear :
1st 2.660
2nd 1.780
3rd 1.300
4th 1.000
5th 0.800
6th 0.630
Set Final to 4.100


LSD - Saleen MAXGrip Speed Sensitive LSD
Initial Torque : 15
Acceleration Sensitivity: 27
Braking Sensitivity: 7

s281pod.jpg


Brake Balance:
7/9 ( personal BB) or for ABS 0 wheel : 4/6, for ABS 1 - feel free to use your preferred brake balance. I recommend to run 2 click higher at the rear.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/9 brake balance as starting point.
Notes :

Saleen S281 has been sold for years in America :) This is 2007 model year S281E replica.

The Saleen S281E has 550HP power with 525 ft lb torque, the replica has been built as close as possible with 550HP/523ftlb. The real car weight is 1642kg or 3620lbs with 53/47 distribution, while in GT6 I can get the weight, but the distribution is at 56/44.

The S281E is equipped with N2 RaceCraft suspension upgrade from Saleen. With coilover springs + damper all around, but still retain the rear live axle with panhard rod. I have set the spring rate according to real life N2 RaceCraft spring rate, and tuned the damper + ARB to gives good balance. Several suspension alignment have also been provided. Try them all, and see which one fits you.

Gearing uses Tremec T56 in real life, a 6 close ratio speed manual with 4.1 final, the ratios are similar to the T56 used on Pontiac GTO and Holden Monaro. I have also included a 2nd set of ratio, Tremec TR6060 close ratio with better spread. The LSD is Saleen MaxGrip Speed Sensitive LSD, I tried to simulate the performance using lower preload and medium lock on acceleration + low lock on braking.

The Saleen S281E was tuned and tested at Tsukuba, Silverstone GP and Nordschleife. At Tsukuba, it can lap an easy 1:05s on comfort soft.


ENJOY :cheers:


UPDATE : Added Stock Exhaust Spec, and tuning parts has been added with notes, thanks to @ColinH96 for the tips.



s281e.jpg
s281fseat.jpg
s281seat.jpg
s2811.jpg
s28123.jpg
 
Last edited:
Back