RIDOX Replica Garage-In Memory of TurnLeft-GT40,300ZX,F430,TVR,AEM S2000,Cizeta,TransAm Doug Nash

  • Thread starter Ridox2JZGTE
  • 5,032 comments
  • 908,315 views
Maki Kamiya Mitsubishi Lancer Evolution VI GSR Wangan Midnight
400HP FITT version

Special Build Maki Kamiya Lancer Evo VI for FITT Sti vs Evo Battle Royal
Comfort Soft to Sports Medium





CAR : Mitsubishi Lancer Evolution VI GSR T.M. Edition '00
Tire : Comfort Soft to Sports Medium


Specs
Horsepower: 400 HP at 6500 RPM
Torque: 359.4 ft-lb at 4500 RPM
Power Limiter at : 99.8%
Weight: 1180 kg
Ballast : 57 kg
Ballast Position : -35
Weight Distribution : 60 / 40
Performance Points: 513


GT AUTO
NO Oil change
Improve Body Rigidity (INSTALLED )
Wheels : +1 Inch Up - RAYS TE37 in White
Car Paint : Scotia White


Tuning Parts Installed :
Intake Tuning
High RPM Range Turbo Kit
Twin Plate Clutch
Adjustable LSD
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Fully Customizable Suspension



Suspension - TEIN MONO SPORT Damper Kit
Front, Rear

Ride Height: 100 100
Spring Rate: 10.00 9.00
Dampers (Compression): 6 6
Dampers (Extension): 5 6
Anti-Roll Bars: 2 3
Camber Angle: 0.2 0.6
Toe Angle: -0.26 0.00


LSD CUSCO Type RS 1.5 way
FRONT
Initial Torque : 18
Acceleration Sensitivity: 27
Braking Sensitivity: 10

REAR
Initial Torque : 13
Acceleration Sensitiviy: 27
Braking Sensitivity: 10


AERO
Rear : 0 ( No aero )



Brake Balance:
4/8 ( personal BB) or for ABS 0 wheel : 4/8, for ABS 1 - feel free to use your preferred brake balance.


Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/8 brake balance as starting point.



Notes :

Maki Kamiya White Evo VI :) This version is FITT STi vs Evo Battle Street Racer Class. For Stowe Wet 100% water - use Comfort Soft tire and Autumn Ring - use Sports Medium. No setting changes.
No tranny my friend?
 
Tatsuya Shima RUF CTR Yellowbird "Blackbird" '87 Wangan Midnight
ISHIDA ARC 500HP

Tuned to replicate Wangan Midnight Blackbird Ishida Arc 500HP
Comfort Soft




CAR : RUF CTR Yellowbird '87
Tire : Comfort Soft

Specs

Horsepower: 500 HP / 507 PS at 6000 RPM
Torque: 463.5 ft-lb at 4500 RPM
Power Limiter at : 99.9%
Weight: 1165 kg
Ballast : 101 kg
Ballast Position : 50
Weight Distribution : 38 / 62 as in real life
Performance Points: 540



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the Blackbird has roll cage in the manga + anime.
Wheels : +1 Inch Up BBS RS or OZ Racing Botticelli III painted in Saddle Tan ( from Chevrolet Corvette Coupe C2 '63 )
Car Paint : Black


Tuning Parts Installed :
Racing Exhaust
Low RPM Range Turbo Kit
Suspension Fully Customizable Kit
Adjustable LSD
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit




Suspension - Swift Springs with Street/Track Tuned JRZ RS Pro Coilover Damper
Front, Rear

Ride Height: 110 123 - Real life based - Alternate Ride Height F/R : lowered 110 110 or street 123 123 ( Loose )
Spring Rate: 10.00 12.98 - Alternate Track Oriented Spring Rate F/R : 10.00 13.75
Dampers (Compression): 7 6
Dampers (Extension): 5 5
Anti-Roll Bars: 3 1
Camber Angle: 0.3 0.3 ( use zero camber for max grip )
Toe Angle: -0.18 0.35




LSD -Paul Guard LSD 30/80
Initial Torque : 22
Acceleration Sensitivity: 20
Braking Sensitivity: 48





Brake Balance:
2/3 ( personal BB) or for ABS 0 wheel : 3/3, for ABS 1 4/4 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/4 brake balance as starting point.



Notes

Shima's Blackbird, this version is from Ishida story arc with 500HP. Low RPM turbo kit has been installed to reach the power.

For this replica, I used real life springs ratio, taken from 930 Turbo with JRZ RS Pro Coilover Damper kit, Swift main springs and helper springs were used. I adapted the setup with stiffer spring rate as the real car has 1040kg dry weight, and this Blackbird tips the scale at 1165kg. I have to add ballast and install weight reduction as I wanted to also replicate the real car weight distribution at 38/62 ( based on 930 Turbo ). Some even reported to have 37/63 with mods, but I can't afford to have that as it will increase the weight even more.

Damper has been tuned in to support the new weight balance, rear damper is set to give the best possible traction on medium speed to high speed corners as it will live as a Wangan car. Front damper has also been set stiffer compared to the early stage version.

LSD uses Paul Guard with 30/80 setup, I adapted the LSD with medium locking on acceleration and high locking on braking side, preload also on medium. A balance for comfort and sports tire.

Gearing remains stock, as I felt the top speed is more than adequate.

I tuned and tested the car at various tracks from Tsukuba, SSR7, Ascari, Willow Springs, Bathurst, Brands Hatch GP, and Silverstone GP.

The Blackbird also tested at SSR7, and I like it there, drives very well on comfort soft :P

I look forward for feedback on the car - power figure and visual parts :



ENJOY :cheers:
 
Last edited:
Tatsuya Shima RUF CTR Yellowbird "Blackbird" '87 Wangan Midnight
PERFECT GTR HIRAMOTO ARC 600HP

Tuned to replicate Wangan Midnight Blackbird Perfect GTR 600HP
Comfort Soft




CAR : RUF CTR Yellowbird '87
Tire : Comfort Soft

Specs

Horsepower: 600 HP / 608 PS at 5800 RPM
Torque: 584.0 ft-lb at 4800 RPM
Power Limiter at : 90.5%
Weight: 1165 kg
Ballast : 101 kg
Ballast Position : 50
Weight Distribution : 38 / 62 as in real life
Performance Points: 568



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the Blackbird has roll cage in the manga + anime.
Wheels : +1 Inch Up BBS RS or OZ Racing Botticelli III painted in Saddle Tan ( from Chevrolet Corvette Coupe C2 '63 )
Car Paint : Black


Tuning Parts Installed :
Engine Tuning Stage 3
Racing Exhaust
Low RPM Range Turbo Kit
Suspension Fully Customizable Kit
Adjustable LSD
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit




Suspension - Swift Springs with Street/Track Tuned JRZ RS Pro Coilover Damper
Front, Rear

Ride Height: 110 123 - Real life based - Alternate Ride Height F/R : lowered 110 110 or street 123 123 ( Loose )
Spring Rate: 10.00 13.75
Dampers (Compression): 8 6
Dampers (Extension): 9 5
Anti-Roll Bars: 3 1
Camber Angle: 0.3 0.3 ( use zero camber for max grip )
Toe Angle: -0.18 0.35




LSD -Paul Guard LSD 30/80
Initial Torque : 22
Acceleration Sensitivity: 20
Braking Sensitivity: 48





Brake Balance:
2/3 ( personal BB) or for ABS 0 wheel : 3/3, for ABS 1 4/4 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/4 brake balance as starting point.



Notes

Shima's Blackbird, this version is from Perfect GTR Hiramoto story arc with 600HP. Low RPM turbo kit and engine tuning stage 3 has been installed to reach the power.

For this replica, I used real life springs ratio, taken from 930 Turbo with JRZ RS Pro Coilover Damper kit, Swift main springs and helper springs were used. I adapted the setup with stiffer spring rate as the real car has 1040kg dry weight, and this Blackbird tips the scale at 1165kg. I have to add ballast and install weight reduction as I wanted to also replicate the real car weight distribution at 38/62 ( based on 930 Turbo ). Some even reported to have 37/63 with mods, but I can't afford to have that as it will increase the weight even more.

Spring rate uses the track oriented setup with 10k front and 13.75k rear, damper has been tuned in to support the new weight balance, rear damper is set to give the best possible traction on medium speed to high speed corners as it will live as a Wangan car. Front damper has also been set even stiffer compared to the Ishida story arc version.

LSD uses Paul Guard with 30/80 setup, I adapted the LSD with medium locking on acceleration and high locking on braking side, preload also on medium. A balance for comfort and sports tire.

Gearing remains stock, as I felt the top speed is more than adequate.

I tuned and tested the car at various tracks from Tsukuba, SSR7, Ascari, Willow Springs, Bathurst, Brands Hatch GP, and Silverstone GP.

The Blackbird also tested at SSR7, and I like it there, drives very well on comfort soft :P

I look forward for feedback on the car - power figure and visual parts :



ENJOY :cheers:
 
Last edited:
Tatsuya Shima RUF CTR Yellowbird "Blackbird" '87 Wangan Midnight
LEGENDARY F1 TURBINE ARC 800+PS

Tuned to replicate Wangan Midnight Blackbird Legendary F1 Turbine 800PS
Comfort Soft




CAR : RUF CTR Yellowbird '87
Tire : Comfort Soft

Specs

Horsepower: 791 HP / 802 PS at 6300 RPM
Torque: 660.5 ft-lb at 6300 RPM
Power Limiter at : 100%
Weight: 1165 kg
Ballast : 101 kg
Ballast Position : 50
Weight Distribution : 38 / 62 as in real life
Performance Points: 602



GT AUTO
Oil change - necessary to reach 800+PS
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the Blackbird has roll cage in the manga + anime.
Wheels : +1 Inch Up BBS RS or OZ Racing Botticelli III painted in Saddle Tan ( from Chevrolet Corvette Coupe C2 '63 )
Car Paint : Black


Tuning Parts Installed :
Engine Tuning Stage 3
Racing Exhaust
HIGH RPM Range Turbo Kit
Suspension Fully Customizable Kit
Adjustable LSD
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit




Suspension - Swift Springs with Street/Track Tuned JRZ RS Pro Coilover Damper
Front, Rear

Ride Height: 110 123 - Real life based - Alternate Ride Height F/R : lowered 110 110 or street 123 123 ( Loose )
Spring Rate: 10.00 13.75
Dampers (Compression): 8 6
Dampers (Extension): 9 5
Anti-Roll Bars: 3 1
Camber Angle: 0.3 0.3 ( use zero camber for max grip )
Toe Angle: -0.18 0.35




LSD -Paul Guard LSD 30/80
Initial Torque : 22
Acceleration Sensitivity: 20
Braking Sensitivity: 48





Brake Balance:
2/3 ( personal BB) or for ABS 0 wheel : 3/3, for ABS 1 4/4 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/4 brake balance as starting point.



Notes

Shima's Blackbird, this version is from Legendary F1 Turbine story arc with 800+PS, where Shima equips the Blackbird with the 800+PS TD-04 Turbine from one of RGO's co-tuners. Oil changed, High RPM turbo kit and engine tuning stage 3 has been installed to reach the power. The Legendary F1 Turbine Blackbird can hit over 350kmh top speed at SSR7 - tested on comfort soft :D

For this replica, I used real life springs ratio, taken from 930 Turbo with JRZ RS Pro Coilover Damper kit, Swift main springs and helper springs were used. I adapted the setup with stiffer spring rate as the real car has 1040kg dry weight, and this Blackbird tips the scale at 1165kg. I have to add ballast and install weight reduction as I wanted to also replicate the real car weight distribution at 38/62 ( based on 930 Turbo ). Some even reported to have 37/63 with mods, but I can't afford to have that as it will increase the weight even more.

Spring rate uses the track oriented setup with 10k front and 13.75k rear, damper has been tuned in to support the new weight balance, rear damper is set to give the best possible traction on medium speed to high speed corners as it will live as a Wangan car. Front damper has also been set even stiffer compared to the Ishida story arc version.

LSD uses Paul Guard with 30/80 setup, I adapted the LSD with medium locking on acceleration and high locking on braking side, preload also on medium. A balance for comfort and sports tire.

Gearing remains stock, as I felt the top speed is more than adequate.

I tuned and tested the car at various tracks from Tsukuba, SSR7, Ascari, Willow Springs, Bathurst, Brands Hatch GP, and Silverstone GP.

The Blackbird also tested at SSR7, and I like it there, drives very well on comfort soft :P

I look forward for feedback on the car - power figure and visual parts


Credits to @MyogiWarrior34 for his Wangan Midnight input, especially all Blackbird version.


ENJOY :cheers:
 
Last edited:
Ferrari 599XX EVOLUZIONE 2012 750PS
Real World Setup

Tuned to replicate Ferrari 599XX Evoluzione 2012
Comfort Soft to Racing Hard



Brands Hatch Grand Prix Circuit_100.jpg



CAR : Ferrari 599 '06
Tire : Comfort Soft to Racing Hard

Specs

Horsepower: 740 HP / 750 PS at 7800 RPM
Torque: 518.5 ft-lb at 6100 RPM
Power Limiter at : 96.7%
Weight: 1310 kg
Ballast : 36 kg
Ballast Position : 44
Weight Distribution : 47 / 53 as in real life
Performance Points: 586



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the real Ferrari 599XX Evoluzione has roll cage.
Custom Rear Wing :
Wing Mount Standard Type D
Wing Large Type D
Winglets Type F
Height -2 and Width +14
Wheels : Standard Size BBS LM-R painted in Metallic Dark Grey
Car Paint : Rosso Corsa


Tuning Parts Installed :
Engine Tuning Stage 1
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit

Adjustable LSD
Twin Plate Clutch
Carbon Drive Shaft
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit
Fully Customizable Dog Clutch Transmission ( Optional )



Suspension - Ferrari Custom Tuned Coil Springs with 2nd Gen Delphi SCM-E Magnetorheological Damper
Front, Rear

Ride Height: 75 75
Spring Rate: 16.07 16.07
Dampers (Compression): 6 7
Dampers (Extension): 7 5
Anti-Roll Bars: 5 4
Camber Angle: 2.5 2.0
Toe Angle: 0.00 0.50



LSD - 2 Way 599XX Tuned E-Diff
Initial Torque : 27
Acceleration Sensitivity: 40
Braking Sensitivity: 40


OPTIONAL - DOG CLUTCH TRANSMISSION - Shorter Final to replicate 599XX Top Speed with Optional High Final
Install all power parts
Set Default
Set Auto Max Speed to 370kmh / 230mph
Adjust each gear :
1st 3.150
2nd 2.180
3rd 1.570
4th 1.190
5th 0.940
6th 0.780
Final Gear : 4.980
Optimum Shift Point : 9000 RPM ( as in real life )


City of Arts and Sciences - Night_126.jpg


Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 4/5 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.



Notes

Still a work in progress, a replica of Ferrari 599XX Evoluzione 2012 with 750PS and 1310kg. I tried to get as close as possible for the torque figure 516ft-lb, the GT6 version replica has close to 519 ft-lb.

The real car - 2010 version with lower power and more weight managed to lap Nordschleife in 6:58.16.

I used stock gearbox in this one for now, suspension and LSD are still being tested. The wing is not accurate, but at least it has a wing. There has been reports of shorter final gear ratio for the 599XX Evo, it was used on Fiorano Test Track lap record of 1:15s.

I have added optional transmission ratio with higher final to replicate real life 599XX top speed 198mph limited by gearing when tested at Fiorano and posted 1:15s lap using higher final.

I tuned and tested this early build at Spa, Brands Hatch GP and Silverstone GP on comfort soft, sports soft and racing hard tires.

ENJOY :cheers:


City of Arts and Sciences - Night_124.jpg





UPDATE : Added optional custom transmission to replicate real life top speed with higher final, 198mph/318kmh - gear limited.
 
Last edited:
Nissan Skyline Hard Top 2000 GT-R "HAKOSUKA" (KPGC10) '70
GRIP/DRIFT Entry Level Real World Setup

Special Build of Grip/Drift Entry Level Hakosuka
Comfort Hard to Comfort Soft



Tsukuba Circuit_122.jpg



CAR : Nissan Skyline Hard Top 2000 GT-R (KPGC10) '70
Tire : Comfort Hard to Comfort Soft

Specs

Horsepower: 183 HP / 185 PS at 7200 RPM
Torque: 147.6 ft-lb at 5700 RPM
Power Limiter at : 100%
Weight: 1100 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 59 / 41 as stock
Performance Points: 392



GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED in this build )
Wheels : +1 Inch Up American Racing Vintage TORQ THRUST painted in Metallic Dark Grey
Car Paint : Titanium Gray Metallic II or Brilliant Black


Tuning Parts Installed :
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch



GRIP Pack
Suspension - Swift Springs 200/400 with Aragosta Damper
Front, Rear

Ride Height: 95 120 ( to replicate visual level height )
Spring Rate: 3.57 7.14
Dampers (Compression): 4 3
Dampers (Extension): 4 2
Anti-Roll Bars: 3 1
Camber Angle: 1.5 1.0
Toe Angle: 0.09 0.36


LSD - 1.5 Way NISMO GT Pro TT LSD
Initial Torque : 22
Acceleration Sensitivity: 30
Braking Sensitivity: 5


City of Arts and Sciences - Night_129.jpg


DRIFT Pack - Comfort Hard Tire - Highly Recommended
Suspension - Swift Springs 200/400 with Aragosta Damper
Front, Rear

Ride Height: 95 120 ( to replicate visual level height )
Spring Rate: 3.57 7.14
Dampers (Compression): 4 4
Dampers (Extension): 4 3
Anti-Roll Bars: 3 4
Camber Angle: 1.5 1.0
Toe Angle: 0.09 0.36


LSD - 2 Way Drift Spec TOMEI Technical TRAX Advance LSD
Initial Torque : 48
Acceleration Sensitivity: 40
Braking Sensitivity: 40


City of Arts and Sciences - Night_130.jpg


Brake Balance:
4/6 ( personal BB) or for ABS 0 wheel : 4/6, for ABS 1 4/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/6 brake balance as starting point.



Notes :

I have owned this Hakosuka since early days of GT6. I really love this legendary GTR :P

First of all, I built this car using real world tuning approach, from my past experience and consulting friends who have had experience with the car, I decided to use 200/400 spring and tuned the damper to balance the car from using front lower ride height. I used much lower front ride height to visually replicate the close to level ride height of a tuned Hakosuka in real life. In real life, Hakosuka needs very high rear spring to avoid bottom out when tuned for track/drift.

I included 2 Pack Setup, one for Grip another for Drift. The Grip Pack uses damper and ARB tuned for grip street/track driving with LSD in 1.5 way from NISMO GT PRO TT.

While for Drift Pack, damper has been stiffened at the rear for more control and ARB is also stiffer at the rear to increase response and easier to rotate. LSD is 2 way courtesy of TOMEI Technical Trax Advance LSD, with high initial torque and cam angle, the LSD in real life is bred for drift :)

Power is modest 185PS, this is more than enough for entry level drifting :P I recommend Tsukuba for drifting practice. The car favors feint drift technique, but you can also use E brake to initiate drift.

ENJOY :cheers:
 
Last edited:
@FussyFez : You might like the hakosuka above :P, @Nomad67 : Thought you might like it too.

@danbojte : I don't know if you like old classic like hakosuka :) and the 599XX Evoluzione should be interesting to drive on SS/RH tire ( it's equipped with Pirelli Slick IRL )


Yeah...thanks I will start them both today... I have been busy with work a lot, having to go out of town... I have my son so there maybe some competition for the PS3 lol..hopefully he'll allow the old man some seat time. I will report back on my usual tracks with some video and how those set ups feel...the 599 looks sweet with that red and the black (drk grey) wheels..
 
Last edited:
Ferrari 599XX EVOLUZIONE 2012 750PS
Real World Setup

Tuned to replicate Ferrari 599XX Evoluzione 2012
Comfort Soft to Racing Hard




CAR : Ferrari 599 '06
Tire : Comfort Soft to Racing Hard

Specs

Horsepower: 740 HP / 750 PS at 7800 RPM
Torque: 518.5 ft-lb at 6100 RPM
Power Limiter at : 96.7%
Weight: 1310 kg
Ballast : 36 kg
Ballast Position : 44
Weight Distribution : 47 / 53 as in real life
Performance Points: 586



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the real Ferrari 599XX Evoluzione has roll cage.
Custom Rear Wing :
Wing Mount Standard Type D
Wing Large Type D
Winglets Type F
Height -2 and Width +14
Wheels : Standard Size BBS LM-R painted in Metallic Dark Grey
Car Paint : Rosso Corsa


Tuning Parts Installed :
Engine Tuning Stage 1
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch
Carbon Drive Shaft
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit



Suspension - Ferrari Custom Tuned Coil Springs with 2nd Gen Delphi SCM-E Magnetorheological Damper
Front, Rear

Ride Height: 75 75
Spring Rate: 16.07 16.07
Dampers (Compression): 6 7
Dampers (Extension): 7 5
Anti-Roll Bars: 5 4
Camber Angle: 2.5 2.0
Toe Angle: 0.00 0.50



LSD - 2 Way 599XX Tuned E-Diff
Initial Torque : 27
Acceleration Sensitivity: 40
Braking Sensitivity: 40





Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 4/5 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.



Notes

Still a work in progress, a replica of Ferrari 599XX Evoluzione 2012 with 750PS and 1310kg. I tried to get as close as possible for the torque figure 516ft-lb, the GT6 version replica has close to 519 ft-lb.

The real car - 2010 version with lower power and more weight managed to lap Nordschleife in 6:58.16.

I used stock gearbox in this one for now, suspension and LSD are still being tested. The wing is not accurate, but at least it has a wing. There has been reports of shorter final gear ratio for the 599XX Evo, it was used on Fiorano Test Track lap record of 1:15s. I may built custom transmission with stock 6 speed ratio and shorter final in the future.

I tuned and tested this early build at Spa, Brands Hatch GP and Silverstone GP on comfort soft, sports soft and racing hard tires.

ENJOY :cheers:




Bravo! This is..IMO the best handling Ferrari tune you've done...keep in mind for my driving style ;)

I am running 57.4xx on Tsukuba. With SS tires...stock tranny and standard brakes. She really wants to break away with all that torque...however its manageable.

Now Nordschleife on the other hand...not so much lol...7:20.xxx Before I even went out I raised it to 85/85 and lowered to springs 15.07/15.07..she is very ass happy and doesn't take too well to all the fine "contours" Nordschleife has to offer ;)
 
Bravo! This is..IMO the best handling Ferrari tune you've done...keep in mind for my driving style ;)

I am running 57.4xx on Tsukuba. With SS tires...stock tranny and standard brakes. She really wants to break away with all that torque...however its manageable.

Now Nordschleife on the other hand...not so much lol...7:20.xxx Before I even went out I raised it to 85/85 and lowered to springs 15.07/15.07..she is very ass happy and doesn't take too well to all the fine "contours" Nordschleife has to offer ;)

:) Thank you for the compliment, you can also lower the camber to add more cornering grip, something like F/R 0.5/0.0 or all zero :P The real life Nordschleife record was done on a slick tire if I remember correctly :)
 
:) Thank you for the compliment, you can also lower the camber to add more cornering grip, something like F/R 0.5/0.0 or all zero :P The real life Nordschleife record was done on a slick tire if I remember correctly :)

Lol..yeah..just tries staggering and put RH in the rear...but toooo much under steer... So I add spring to the rear to compensate... Helped...but still not good...braking is killer on the bumpy bits...as in no breaks...
Nosed dived straight into a barrier... It was as if someone cut my break lines lol! ..

I will run full RH and see what happens... I just think the suspension is too hard??? I dunno...anyway.. I'm liking it...my fav Ferrari so far :)
 
Lol..yeah..just tries staggering and put RH in the rear...but toooo much under steer... So I add spring to the rear to compensate... Helped...but still not good...braking is killer on the bumpy bits...as in no breaks...
Nosed dived straight into a barrier... It was as if someone cut my break lines lol! ..

I will run full RH and see what happens... I just think the suspension is too hard??? I dunno...anyway.. I'm liking it...my fav Ferrari so far :)

Mixing tire is a no no IMO, it creates more issue than solving :lol: So, did you also try zero camber ? If you really want it to drive well at bumpy track like Nordschleife, I suggest to run much lower spring rate ( 10.71/10.71 ) and higher ride height ( 95/95 or 100/100 at least ). If you run higher rear spring, only increase in 0.10 increment, even 100lb/in or 1.786kg/mm increase of spring rate at the rear can cause oversteer tendency when using the camber ( 2.5/2.0 )

For damper on bumpy track, maybe this might help :
Dampers (Compression): 4 6
Dampers (Extension): 4 4

if the 599XX still dives too much under heavy braking, increase front compression to 8 and extension to 7 while rear comp at 6 and rear ext 4 like above.
 
Mixing tire is a no no IMO, it creates more issue than solving :lol: So, did you also try zero camber ? If you really want it to drive well at bumpy track like Nordschleife, I suggest to run much lower spring rate ( 10.71/10.71 ) and higher ride height ( 95/95 or 100/100 at least ). If you run higher rear spring, only increase in 0.10 increment, even 100lb/in or 1.786kg/mm increase of spring rate at the rear can cause oversteer tendency when using the camber ( 2.5/2.0 )

For damper on bumpy track, maybe this might help :
Dampers (Compression): 4 6
Dampers (Extension): 4 4

if the 599XX still dives too much under heavy braking, increase front compression to 8 and extension to 7 while rear comp at 6 and rear ext 4 like above.

I ran the camber down to F 1 and rear .08 but will take it down completely... To be honest....its not often my friend that I see you using such high camber rates... So I thought maybe it fixed...appears not...and quite frankly I should know better anyway... Re camber and breaking...especially with Nordschleife. I will also try the tracks you've mentioned... I don't usually run them...so not expecting great times...but will be interesting to see what I pull in comparison.

I have to been kicked off the PS for now...good thing as I was getting a little frustrated with Nordschleife and was making stupid mistakes that I wouldn't normally make.... Up until that point... I had an awesome run...the 599 is actually quite fun to drive... I like having things a little loose...rather than tight... But as we all know too much of either...is disastrous....

Those settings you've proved sound good and will try it when I am allowed back on the PS3 ;) I will start a new file for that setup.
 
I ran the camber down to F 1 and rear .08 but will take it down completely... To be honest....its not often my friend that I see you using such high camber rates... So I thought maybe it fixed...appears not...and quite frankly I should know better anyway... Re camber and breaking...especially with Nordschleife. I will also try the tracks you've mentioned... I don't usually run them...so not expecting great times...but will be interesting to see what I pull in comparison.

I have to been kicked off the PS for now...good thing as I was getting a little frustrated with Nordschleife and was making stupid mistakes that I wouldn't normally make.... Up until that point... I had an awesome run...the 599 is actually quite fun to drive... I like having things a little loose...rather than tight... But as we all know too much of either...is disastrous....

Those settings you've proved sound good and will try it when I am allowed back on the PS3 ;) I will start a new file for that setup.

I used camber on some of the replica/tune with real world setup to give it unique handling :), for now camber is indeed broken, but that won't stop me to use it from time to time, when it eventually be fixed by PD, it should drive much better. In the mean time, if the camber is unfavorable to drive, use zero camber, it should give much more grip all around. Tuning on camber also forces me to tune with lower grip limit, although it's not really beneficial, sometimes if produces interesting tune.

My next replica is F430 Scuderia with real world setup including camber to replicate real life Spa lap time :P and it has even higher camber than the 599XX.
 
Ferrari F430 Scuderia '07 Swift/AFCO/MOTON Tuned Real World Setup

Special Build Replica of Ferrari F430 Scuderia
Comfort Soft to Sports Medium




CAR : Ferrari F430 Scuderia '07
Tire : Comfort Soft to Sports Medium

Specs - No Fuel

Horsepower: 502 HP at 8500 RPM
Torque: 347.1 ft-lb at 5500 RPM
Power Limiter at : 100%
Weight: 1363 kg
Ballast : 135 kg
Ballast Position : 19
Weight Distribution : 42.5 / 57.5 as in real life with no fuel
Performance Points: 548

Specs - Full Tank Weight
Horsepower: 502 HP at 8500 RPM
Torque: 347.1 ft-lb at 5500 RPM
Power Limiter at : 100%
Weight: 1423 kg
Ballast : 195 kg
Ballast Position : 18
Weight Distribution : 42.14 / 57.86 as in real life with full fuel tank
Performance Points: 544



GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED in this build )
Wheels : Stock
Car Paint : Rosso Corsa or Laguna


Tuning Parts Installed :
Suspension Fully Customizable Kit
Adjustable LSD
Weight Reduction Stage 1



STREET Spec
Suspension - AFCO Springs 475/650 with MOTON 3 Way Motorsports Coilover Damper
High Camber

Front, Rear

Ride Height: 87 99
Spring Rate: 8.48 11.61
Dampers (Compression): 4 9
Dampers (Extension): 5 4
Anti-Roll Bars: 3 3
Camber Angle: 3.0 2.5
Toe Angle: 0.00 0.25

Suspension - AFCO Springs 475/650 with MOTON 3 Way Motorsports Coilover Damper
Medium Camber

Front, Rear

Ride Height: 87 99
Spring Rate: 8.48 11.61
Dampers (Compression): 4 9
Dampers (Extension): 5 4
Anti-Roll Bars: 3 3
Camber Angle: 2.5 2.0
Toe Angle: 0.00 0.25

Suspension - AFCO Springs 475/650 with MOTON 3 Way Motorsports Coilover Damper
Factory Ferrari Alignment + Ride Height

Front, Rear

Ride Height: 97 119
Spring Rate: 8.48 11.61
Dampers (Compression): 4 9
Dampers (Extension): 5 4
Anti-Roll Bars: 3 3
Camber Angle: 1.5 2.0
Toe Angle: 0.15 0.25

Suspension - AFCO Springs 475/650 with MOTON 3 Way Motorsports Coilover Damper
Factory Ferrari Alignment + Lowest Ride Height with Lower Rake

Front, Rear

Ride Height: 67 79
Spring Rate: 8.48 11.61
Dampers (Compression): 4 9
Dampers (Extension): 5 4
Anti-Roll Bars: 3 3
Camber Angle: 1.5 2.0
Toe Angle: 0.15 0.25

TRACK Spec
Suspension - SWIFT Hypercoils Springs 784/1008 with MOTON 3 Way Motorsports Coilover Damper
High Camber

Front, Rear

Ride Height: 67 79
Spring Rate: 14.00 18.00
Dampers (Compression): 4 8
Dampers (Extension): 5 4
Anti-Roll Bars: 3 3
Camber Angle: 3.0 2.5
Toe Angle: 0.00 0.25

Suspension - SWIFT Hypercoils Springs 784/1008 with MOTON 3 Way Motorsports Coilover Damper
Medium Camber

Front, Rear

Ride Height: 67 79
Spring Rate: 14.00 18.00
Dampers (Compression): 4 8
Dampers (Extension): 5 4
Anti-Roll Bars: 3 3
Camber Angle: 2.5 2.0
Toe Angle: 0.00 0.25



LSD - 2 Way E-Diff
Initial Torque : 24
Acceleration Sensitivity: 30
Braking Sensitivity: 30




Ascari Full Track_38.jpg



Brake Balance:
7/8 ( personal BB) or for ABS 0 wheel : 7/8, for ABS 1 7/8 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/8 brake balance as starting point.



Notes

This Ferrari F430 Scuderia is built with the main goal to replicate real life lap record at Spa, 2:40.00

As stock suspension spring rate is not achievable, the rear can't go low enough, I opted to use 2 different spring set for this replica. I have also replicated the correct weight figure from corner weight ( with some fuel ) result in real life, as well as weight distribution.

There are 2 sets of suspension setup, one is mainly aimed at street use with softer springs from AFCO and the other is aimed at track racing with Swift Hypercoils at close to double the rate of the original Scuderia Gen II OEM Springs. A track oriented alignment has also been used ( camber and toe ).

Ride height has also been replicated, real life F430 Scuderia stock height has a high rake at close to 22mm difference ( higher rear ). For this replica I decided to use smaller amount of rake highly recommended at Ferrari owner forum - 12mm, this is a good balance for track driving and street in real life - slightly tighter with less rake.
The effect is opposite in GT6, another PD blunder :lol:. To compensate for the ride height and camber used, I have tuned the damper for more neutral balance and to allow the driver to throttle steer even when at the apex, modulate the throttle to steer the nose. Due to the high degree of camber, the Ferrari needs smooth steering to avoid sudden loss of grip at either end when on comfort tires.

LSD uses 2 way to simulate E Diff with moderate locking rate and medium preload.

The F430 Scuderia can replicate the Spa lap time on comfort soft tire. I managed 2:39s in 1st lap :) The balance is very good and fun to drive, especially at Eau Rouge :D

ENJOY :cheers:

UPDATE : Added new suspension setup, factory alignment + ride height and medium camber for street and track.

1.09+ : Updated ride height due to range limit changes by PD, updated weight distribution based on real car corner weight and corrected toe value at per side.

Added alternate spec with full fuel tank.




Circuit de Spa-Francorchamps_47.jpg


Circuit de Spa-Francorchamps_55.jpg
 
Last edited:
I have updated Ferrari 599XX Evo with optional gearing to replicate real life top speed on a 599XX fitted with high final. I have also posted Ferrari F430 Scuderia.

Recently tested both Z4 GT3 and GTR GT3 Schulze, not sure if both is good, but I will post them again as I used camber on both :)
 
Nissan Skyline Hard Top 2000 GT-R "HAKOSUKA" (KPGC10) '70
GRIP/DRIFT Entry Level Real World Setup

Special Build of Grip/Drift Entry Level Hakosuka
Comfort Hard to Comfort Soft




CAR : Nissan Skyline Hard Top 2000 GT-R (KPGC10) '70
Tire : Comfort Hard to Comfort Soft

Specs

Horsepower: 183 HP / 185 PS at 7200 RPM
Torque: 147.6 ft-lb at 5700 RPM
Power Limiter at : 100%
Weight: 1100 kg
Ballast : 0 kg
Ballast Position : 0
Weight Distribution : 59 / 41 as stock
Performance Points: 392



GT AUTO
NO Oil change
Improve Body Rigidity ( NOT INSTALLED in this build )
Wheels : +1 Inch Up American Racing Vintage TORQ THRUST painted in Metallic Dark Grey
Car Paint : Titanium Gray Metallic II or Brilliant Black


Tuning Parts Installed :
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit
Adjustable LSD
Twin Plate Clutch



GRIP Pack
Suspension - Swift Springs 200/400 with Aragosta Damper
Front, Rear

Ride Height: 95 120 ( to replicate visual level height )
Spring Rate: 3.57 7.14
Dampers (Compression): 4 3
Dampers (Extension): 4 2
Anti-Roll Bars: 3 1
Camber Angle: 1.5 1.0
Toe Angle: 0.09 0.36


LSD - 1.5 Way NISMO GT Pro TT LSD
Initial Torque : 22
Acceleration Sensitivity: 30
Braking Sensitivity: 5




DRIFT Pack - Comfort Hard Tire - Highly Recommended
Suspension - Swift Springs 200/400 with Aragosta Damper
Front, Rear

Ride Height: 95 120 ( to replicate visual level height )
Spring Rate: 3.57 7.14
Dampers (Compression): 4 4
Dampers (Extension): 4 3
Anti-Roll Bars: 3 4
Camber Angle: 1.5 1.0
Toe Angle: 0.09 0.36


LSD - 2 Way Drift Spec TOMEI Technical TRAX Advance LSD
Initial Torque : 48
Acceleration Sensitivity: 40
Braking Sensitivity: 40




Brake Balance:
4/6 ( personal BB) or for ABS 0 wheel : 4/6, for ABS 1 4/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/6 brake balance as starting point.



Notes :

I have owned this Hakosuka since early days of GT6. I really love this legendary GTR :P

First of all, I built this car using real world tuning approach, from my past experience and consulting friends who have had experience with the car, I decided to use 200/400 spring and tuned the damper to balance the car from using front lower ride height. I used much lower front ride height to visually replicate the close to level ride height of a tuned Hakosuka in real life. In real life, Hakosuka needs very high rear spring to avoid bottom out when tuned for track/drift.

I included 2 Pack Setup, one for Grip another for Drift. The Grip Pack uses damper and ARB tuned for grip street/track driving with LSD in 1.5 way from NISMO GT PRO TT.

While for Drift Pack, damper has been stiffened at the rear for more control and ARB is also stiffer at the rear to increase response and easier to rotate. LSD is 2 way courtesy of TOMEI Technical Trax Advance LSD, with high initial torque and cam angle, the LSD in real life is bred for drift :)

Power is modest 185PS, this is more than enough for entry level drifting :P I recommend Tsukuba for drifting practice. The car favors feint drift technique, but you can also use E brake to initiate drift.

ENJOY :cheers:

400PP champion! (Grip)

Great tune friend! 👍
 
Jaguar XKR-S '11 600PP

Tuned for Comfort Soft to Sports Soft

CAR : Jaguar XKR-S '11
Tire : Comfort Soft to Sports Soft


Specs
Horsepower: 759 HP at 7500 RPM
Torque : 608.3 ft-lb at 4500 RPM
Power Limiter at : 100%
Weight: 1355 kg
Ballast : 13 kg
Ballast Position : -21
Weight Distribution : 54 / 46 as stock
Performance Points: 600

GT AUTO
Oil change
Improve Body Rigidity ( INSTALLED ) - there's no bad side effect of this, highly recommended.
Wheels : Standard Size - RAYS57Gainer in Black
Car Paint : Emerald Green Metallic

Tuning Parts Installed :
Engine Tuning Stage 3
Sports Computer
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Adjustable LSD
Triple Plate Clutch
Carbon Drive Shaft
6 Speed Transmission
Fully Customizable Suspension
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Window Weight Reduction

Suspension
Front, Rear

Ride Height: 110 110
Spring Rate: 11.0 13.53
Dampers (Compression): 8 5
Dampers (Extension): 7 4
Anti-Roll Bars: 4 5
Camber Angle: 0.2 0.2 ( use zero camber all around if wanted max grip possible )
Toe Angle: -0.08 0.00 ( use rear toe in for more stability - recommend around 0.08 to 0.15 )

LSD - 1.5 way high preload
Initial Torque : 24
Acceleration Sensitivity: 18
Braking Sensitivity: 5 - high initial to improve response and reduce handling changes when transitioning from braking / coasting to on throttle and vice versa. Lower acceleration to improve balance in mid corner and minimum brake to reduce understeer on entry.

Brake Balance:
8/9 ( personal BB) or for ABS 0 wheel : 4/5, for ABS 1 - feel free to use your preferred brake balance. I would recommend to run just one click higher on rear brake.

Recommended setting for DS3 user :

Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 8/9 brake balance as starting point.


Notes :
Made a simple tune for the Jaguar XKR-S '11. The car was used on Rome Seasonal with preset soft suspension. For this build, I focused on reducing entry understeer while maintaining stock weight distribution. I used comfort soft when fine tuning the handling, tuned and tested at Bathurst and Brands Hatch GP. With comfort soft tire, the car was able to lap Brands Hatch GP in 1:36s range and on sports soft an easy 1:29s.

OK...so I used this tune to help me out with my Jag... It turned out to be very useful on Nordschleife. Thanks Ridox.

Watch "GT6 Jaguar XKR-S '11 Nordschleife" on YouTube
GT6 Jaguar '11 Nordschleife:
 
Last edited:
Ferrari 599XX EVOLUZIONE 2012 750PS
Real World Setup

Tuned to replicate Ferrari 599XX Evoluzione 2012
Comfort Soft to Racing Hard




CAR : Ferrari 599 '06
Tire : Comfort Soft to Racing Hard

Specs

Horsepower: 740 HP / 750 PS at 7800 RPM
Torque: 518.5 ft-lb at 6100 RPM
Power Limiter at : 96.7%
Weight: 1310 kg
Ballast : 36 kg
Ballast Position : 44
Weight Distribution : 47 / 53 as in real life
Performance Points: 586



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the real Ferrari 599XX Evoluzione has roll cage.
Custom Rear Wing :
Wing Mount Standard Type D
Wing Large Type D
Winglets Type F
Height -2 and Width +14
Wheels : Standard Size BBS LM-R painted in Metallic Dark Grey
Car Paint : Rosso Corsa


Tuning Parts Installed :
Engine Tuning Stage 1
Racing Exhaust
Isometric Exhaust Manifold
Catalytic Converter Sports
Intake Tuning
Suspension Fully Customizable Kit

Adjustable LSD
Twin Plate Clutch
Carbon Drive Shaft
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit
Fully Customizable Dog Clutch Transmission ( Optional )



Suspension - Ferrari Custom Tuned Coil Springs with 2nd Gen Delphi SCM-E Magnetorheological Damper
Front, Rear

Ride Height: 75 75
Spring Rate: 16.07 16.07
Dampers (Compression): 6 7
Dampers (Extension): 7 5
Anti-Roll Bars: 5 4
Camber Angle: 2.5 2.0
Toe Angle: 0.00 0.50



LSD - 2 Way 599XX Tuned E-Diff
Initial Torque : 27
Acceleration Sensitivity: 40
Braking Sensitivity: 40


OPTIONAL - DOG CLUTCH TRANSMISSION - Shorter Final to replicate 599XX Top Speed with Optional High Final
Install all power parts
Set Default
Set Auto Max Speed to 370kmh / 230mph
Adjust each gear :
1st 3.150
2nd 2.180
3rd 1.570
4th 1.190
5th 0.940
6th 0.780
Final Gear : 4.980
Optimum Shift Point : 9000 RPM ( as in real life )




Brake Balance:
3/4 ( personal BB) or for ABS 0 wheel : 3/4, for ABS 1 4/5 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/5 brake balance as starting point.



Notes

Still a work in progress, a replica of Ferrari 599XX Evoluzione 2012 with 750PS and 1310kg. I tried to get as close as possible for the torque figure 516ft-lb, the GT6 version replica has close to 519 ft-lb.

The real car - 2010 version with lower power and more weight managed to lap Nordschleife in 6:58.16.

I used stock gearbox in this one for now, suspension and LSD are still being tested. The wing is not accurate, but at least it has a wing. There has been reports of shorter final gear ratio for the 599XX Evo, it was used on Fiorano Test Track lap record of 1:15s.

I have added optional transmission ratio with higher final to replicate real life 599XX top speed 198mph limited by gearing when tested at Fiorano and posted 1:15s lap using higher final.

I tuned and tested this early build at Spa, Brands Hatch GP and Silverstone GP on comfort soft, sports soft and racing hard tires.

ENJOY :cheers:



UPDATE : Added optional custom transmission to replicate real life top speed with higher final, 198mph/318kmh - gear limited.


Hey Ridox. Your advice on the dampers was primo....and did the trick....not sure if you want to add those damper settings for tracks like Nordschleife but for me it was the cure for this car. I also have a video of Tsukuba which I will add shortly.

Ran RH on Nordschleife and SS on Tsukuba. This tune for me was a very welcome tune as I was starting to lose faith in Ferrari lol. For me anyway and my driving style this though tricky to drive was actually a lot of fun...rather then frustrating.

Thanks again bud :cheers:


Nordschleife:


Watch "GT6 Ferrari 599 '06 599XX EVOLUZIONE 2012 Replica" on YouTube
GT6 Ferrari 599 '06 599XX EVOLUZIONE 2012 Replica:


Tsukuba:

Watch "GT6 Ferrari 599 '06 599XX EVOLUZIONE 2012 Replica…" on YouTube
GT6 Ferrari 599 '06 599XX EVOLUZIONE 2012 Replica…:
 
Last edited:
Great to hear @Nomad67, please let me know the suspension setup that you use for Nordschleife ( springs and damper ). I ran the bumpy track damper with the 16.07k springs at Nordschleife and it drives great for me, just needs to watch my speed, it jumps a lot, the 599XX goes like a rocket with the high final :) I will update the tune later.

Let me know if the Jag has any issues :)
 
Ferrari F40 '92 ( Real World Setup version ) EU Market
AUTO Motorsport Mag 1989 Review Version

Special Build Replica with Real World Setup Ferrari F40 '92 EU Market AUTO Motorsport Mag 1989 Review Version
Comfort Soft to Sports Medium




CAR : Ferrari F40 '92
Tire : Comfort Soft to Sports Medium

Specs - No Power Upgrade

Horsepower: 471 HP / 478 PS at 7000 RPM
Torque: 425.2 ft-lb at 4000 RPM
Power Limiter at : 100%
Weight: 1254 kg ( Auto Motorsport tested curb weight with full tank 120L and all fluids )
Ballast : 142 kg
Ballast Position : 16
Weight Distribution : 39.2 / 60.8 as in real life ( curb weight with full tank and all fluids - closer to 38/62 with driver )
Performance Points: 535

Specs - No Power Upgrade - No Fuel Curb Weight
Horsepower: 471 HP / 478 PS at 7000 RPM
Torque: 425.2 ft-lb at 4000 RPM
Power Limiter at : 100%
Weight: 1169 kg ( weight figure without fuel, calculated based on 0.711kg for 1 litre of fuel and 1254kg on 120L full tank )
Ballast : 57 kg
Ballast Position : -13
Weight Distribution : 42 / 58 as in real life ( without fuel )
Performance Points: 540

NO CATS Specs Option 1 ( Isometric Exhaust Manifold + High RPM Range Turbo Kit )
Horsepower: 513 HP / 520 PS at 6800 RPM
Torque: 451.5 ft-lb at 4500 RPM
Power Limiter at : 98.4%
Weight: 1254 kg ( Auto Motorsport tested curb weight with full tank 120L and all fluids )
Ballast : 142 kg
Ballast Position : 16
Weight Distribution : 39.2 / 60.8 as in real life ( curb weight with full tank and all fluids - closer to 38/62 with driver )
Performance Points: 547


NO CATS Specs Option 2 ( Isometric Exhaust Manifold + Intake Tuning )
Horsepower: 513 HP / 520 PS at 7000 RPM
Torque: 468.5 ft-lb at 4000 RPM
Power Limiter at : 98.9%
Weight: 1254 kg ( Auto Motorsport tested curb weight with full tank 120L and all fluids )
Ballast : 142 kg
Ballast Position : 16
Weight Distribution : 39.2 / 60.8 as in real life ( curb weight with full tank and all fluids - closer to 38/62 with driver )
Performance Points: 548


NO CATS Specs Option 1 ( Isometric Exhaust Manifold + High RPM Range Turbo Kit )
No Fuel Weight

Horsepower: 513 HP / 520 PS at 6800 RPM
Torque: 451.5 ft-lb at 4500 RPM
Power Limiter at : 98.4%
Weight: 1169 kg ( weight figure without fuel, calculated based on 0.711kg for 1 litre of fuel and 1254kg on 120L full tank )
Ballast : 57 kg
Ballast Position : -13
Weight Distribution : 42 / 58 as in real life ( without fuel )
Performance Points: 553


NO CATS Specs Option 2 ( Isometric Exhaust Manifold + Intake Tuning )
No Fuel Weight

Horsepower: 513 HP / 520 PS at 7000 RPM
Torque: 468.5 ft-lb at 4000 RPM
Power Limiter at : 98.9%
Weight: 1169 kg ( weight figure without fuel, calculated based on 0.711kg for 1 litre of fuel and 1254kg on 120L full tank )
Ballast : 57 kg
Ballast Position : -13
Weight Distribution : 42 / 58 as in real life ( without fuel )
Performance Points: 554



GT AUTO
NO Oil change
Wheels : Stock
Car Paint : Rosso Corsa



Tuning Parts Installed :
NO Cats replica power :
Optional High RPM Range Turbo Kit + Isometric Exhaust Manifold -- see notes for more details.
Optional Intake Tuning + Isometric Exhaust Manifold -- see notes for more details.

Suspension Fully Customizable Kit
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Weight Reduction Stage 3
Window Weight Reduction



Suspension - Eibach ERS Springs with Street/Track Tuned Damper and Real World Alignment
Front, Rear

Ride Height: 101 101 - standard - Alternate Ride Height F/R : 63 56 ( lowest ), 115 115 ( high ) and 81 101 ( track lowered)
Spring Rate: 8.25 12.00 - Alternate High Speed Track Oriented Spring Rate F/R : 12.00 12.00
Dampers (Compression): 7 7
Dampers (Extension): 7 6
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33



Suspension - Eibach ERS Springs based on stock F40 spring ratio with Street/Track Tuned Damper with
Real World Alignment and Ride Height based on Best Motoring Tsukuba Battle driven by Motoharu Kurosawa

Front, Rear

Ride Height: 81 81 - Best Motoring Battle
Spring Rate: 8.04 11.61 - Based on factory F40 spring rate ratio
Dampers (Compression): 7 7
Dampers (Extension): 7 6
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33

Ferrari F40 US Edition Technical Manual Alignment Range :
Camber Angle : 1.10 1.0 ( Front Camber Range : -1.16 +/- -1.50, Rear Camber Range : -1.0 +/- -1.33 )
Toe Angle : 0.20 0.33 ( Front Toe In Range : 0.20 +/- 0.33, Rear Toe In Range : 0.33 +/- 0.46 )



DOG CLUTCH TRANSMISSION - Corrected EU Market AUTO Motorsport Mag 1989 Review Version Ratio Gear Set and Final
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed to 310kmh / 193mph
Adjust each gear :
1st 2.769
2nd 1.722
3rd 1.227
4th 0.963
5th 0.767
Final Gear : 3.620
Optimum Shift Point : 7400-7700 RPM ( as in real life )



LSD -ZF Self Locking LSD with 60% Lock and Medium Preload - AUTO Motorsport Mag 1989 Review Version
Initial Torque : 30
Acceleration Sensitivity: 36
Braking Sensitivity: 36

Alternate LSD Setup for looser handling :

Initial Torque : 27
Acceleration Sensitivity: 36
Braking Sensitivity: 36

or

Initial Torque : 20
Acceleration Sensitivity: 36
Braking Sensitivity: 36


OPTIONAL LSD SETUP F355 Spec :
LSD -ZF Self Locking LSD with 45% Lock and High Preload
Initial Torque : 40
Acceleration Sensitivity: 27
Braking Sensitivity: 27

Alternate LSD Setup for looser handling :

Initial Torque : 37
Acceleration Sensitivity: 27
Braking Sensitivity: 27

or

Initial Torque : 17
Acceleration Sensitivity: 27
Braking Sensitivity: 27



Brake Balance:
7/6 ( personal BB) or for ABS 0 wheel : 6/4, for ABS 1 7/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/6 brake balance as starting point.



Notes :
Ferrari F40, the last great Ferrari IMO, no electronics aids, just pure man and machine :)

This car is one of my most favorite ride in GT5 and GT6, and it's well known for it's inaccuracy in terms of stats and stock setup.

I made this special replica build with the main goal of correcting the mistakes and make it handle more like a Ferrari, whatever that means :P

First of all, there are 2 region market for Ferrari F40, Europe and US. Both has distinctive setup from power, weight to gearing.

The EU market has much lighter dry weight and comes with lift kit/variable ride height suspension system from factory, with lower final gear and slightly different 2nd and 5th gear :)

This replica is a representation of EU F40 with lift kit, EIBACH ERS springs installed and further based on specification from Auto Motorsport Magazine review back in February 1989. There are some differences to the earlier version replica I have built, mainly the weight, gearing and LSD. I have used LSD profile from F355, this time I have the correct data with 60% lock LSD. For gearing, the Auto Motorsport Mag version although uses different values, also achieved the exact speed/accceleration/top speed and rpm /speed figure on each gear as the other 2 version have posted. The other 2 replica earlier gearing was based on Ferrari owner's club and manual reports, while this one is based on magazine review.

The power of EU F40 from dyno reports with cat installed of 471HP / 478PS / 478CV with curb weight as measured and reported by Auto Motorsport Magazine = 1254kg / 2763.81 lbs and 39.2/60.8 weight distribution. This is curb weight with full fluids and full tank of fuel ( 120L ) - without driver. With a driver, the weight distribution will shift closer to 38/62.
Gross Vehicle Weight ( GVW ) as reported is 1430kg ( max operating weight with driver + passenger + cargo).

Some EU F40 do not have cats installed, usually the early years model, these non Cats F40 has been reported to have in excess of 500HP, some even dynoed with close to 520PS or 513HP.

To achieve the power figure of non cats EU F40, I decided to include 2 optional upgrades path, one uses high rpm range turbo kit and exhaust manifold, the other intake tuning and exhaust manifold. The specs are listed above.

For suspension, I have used EIBACH ERS springs at 8.25kg/mm front and 12.0kg/mm rear, maintaining spring ratio for the stock F40 spring rate, as the stock value can't be achieved. Damper setup for street and track, with ARB set for balance. Toe and camber has been setup with real world alignment values, based on F355 alignment which from report share similar alignment with F40 - closest information I can get :)

An alternate spring rate at 12kg/mm front and rear also provided, this is more oriented for high speed cornering and sweepers.

The real Ferrari F40 has ZF Self Locking LSD, based from Auto Motorsport review specs, the rear LSD has 60% lock, I have tuned likewise, with medium preload. The previous replica LSD which uses specs from Ferrari F355 with 45% lock and high preload also listed as optional.

The corrected EU F40 ratios and final based from the Auto Motorsport mag also able to replicate top speed of real F40 at 324kmh/201mph, furthermore, the rolling acceleration time and vehicle speed at 5th gear 1000rpm has been closely replicated - similar to the tested reports from the magazine.

Various test results from Auto Motorsport mag :

60kmh-100kmh in 4th gear rolling acceleration : 6.3s
80kmh-120kmh in 5th gear rolling acceleration : 8.5s
5th Gear speed at 1000 RPM : 43.5kmh

F40 speed on each gear at about 7400-7700rpm optimal shift point :
1st 90kmh
2nd 144kmh
3rd 201kmh
4th 255kmh
5th 321+kmh

Feel free to try it at SSR7 :)

The F40 was extensively tuned/tested at Ascari, Tsukuba, Spa, Bathurst, Nordschleife, SSR7, Apricot Hill, Brands Hatch GP and Willow Springs.

I also managed to replicate the real life lap time of F40 at Tsukuba, done on Best Motoring at 1:03.73. The car easily do 1:02s comfort soft - slightly quicker than the US F40, as it should :D

Another real life at Suzuka record 2:25.27 in real life can easily be replicated. I managed 2:21.175s on 1st lap.


ENJOY :cheers:



Real life vs GT6 Ride Height :

F/R 115mm / 115mm GT6 vs High Setting Lift Kit

View attachment 156919
View attachment 156928

F/R 101mm / 101mm GT6 vs Standard Lowered Setting Lift Kit

View attachment 156921
View attachment 156914

F/R 81mm / 101mm GT6 vs Track Lowered Setting Lift Kit

View attachment 156918
View attachment 156915

View attachment 156931
View attachment 156911

F/R 63mm / 56mm GT6 vs Dropped F40

View attachment 156906
View attachment 156910

AUTO MOTORSPORT Feb '89 Scan
F40AutoMotorsport89.jpg


UPDATE : Added weight figure without fuel, calculated from 120L full tank with 0.711kg = 1 litre of fuel. Weight without fuel is at 1169kg, very close to 1170kg :) Weight distribution at 42/58 without fuel. I have also added new suspension setup based on stock factory Ferrari F40 spring rate ratio, this is the lowest / closest to stock value possible, this setup has ride height based on Best Motoring F40 Tsukuba Battle as driven by Gan-San aka Motoharu Kurosawa, the F40 won the race :D. Ride height at 81mm / 81mm, visually matched :cheers: The F40 with no fuel and Best Motoring ride height + stock spring rate ratio, managed flat 1:42s at Red Bull Ring on Comfort Soft in 1st lap ( cold tires ) :eek:

UPDATE 1.09 : Added Ferrari F40 US Edition Tech Manual Alignment Range, highly recommended to be used as a base to start.
 
Last edited:
I have posted another great replica version of EU F40, based on Auto Motorsport '89 magazine review, this F40 is blistering quick, just like the EU F40 previously released.

I have also updated the previous 2 F40 replica ( US and EU ) with corrected LSD specs and optional gearing on the EU. This Auto Motorsport mag version has curb weight ( full tank ) instead of dry weight like previous 2.

Ferrari F40 '92 ( Real World Setup version ) US Market Version

Special Build Replica with Real World Setup Ferrari F40 '92 US Market version
Comfort Soft to Sports Medium




CAR : Ferrari F40 '92
Tire : Comfort Soft to Sports Medium

Specs

Horsepower: 503 HP / 510 PS at 7000 RPM
Torque: 455.0 ft-lb at 4000 RPM
Power Limiter at : 99.9%
Weight: 1286 kg ( lowest dry weight )
Ballast : 174 kg
Ballast Position : 1
Weight Distribution : 42 / 58 as in real life ( dry weight )
Performance Points: 543


GT AUTO
NO Oil change
Wheels : Stock
Car Paint : Rosso Corsa



Tuning Parts Installed :
Intake Tuning or Optional High RPM Range Turbo Kit -- see notes for more details.
Suspension Fully Customizable Kit
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Weight Reduction Stage 3
Window Weight Reduction



Suspension - Eibach ERS Springs with Street/Track Tuned Damper and Real World Alignment
Front, Rear

Ride Height: 101 101 - standard - Alternate Ride Height F/R : 63 56 ( lowest ), 115 115 ( high ) and 81 101 ( track lowered)
Spring Rate: 8.25 12.00 - Alternate High Speed Track Oriented Spring Rate F/R : 12.00 12.00
Dampers (Compression): 7 6
Dampers (Extension): 7 5
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33


DOG CLUTCH TRANSMISSION - Corrected US Market Ratio Gear Set and Final
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed to 220kmh / 137mph ( lowest )
Adjust each gear :
1st 3.692
2nd 2.285
3rd 1.636
4th 1.284
5th 0.978
Final Gear : 2.900
Optimum Shift Point : 7400-7700 RPM ( as in real life )


LSD -ZF Self Locking LSD with 60% Lock and Medium Preload - AUTO Motorsport Mag 1989 Review Version
Initial Torque : 30
Acceleration Sensitivity: 36
Braking Sensitivity: 36

Alternate LSD Setup for looser handling :

Initial Torque : 27
Acceleration Sensitivity: 36
Braking Sensitivity: 36

or

Initial Torque : 20
Acceleration Sensitivity: 36
Braking Sensitivity: 36


OPTIONAL LSD SETUP F355 Spec :
LSD -ZF Self Locking LSD with 45% Lock and High Preload
Initial Torque : 40
Acceleration Sensitivity: 27
Braking Sensitivity: 27

Alternate LSD Setup for looser handling :

Initial Torque : 37
Acceleration Sensitivity: 27
Braking Sensitivity: 27

or

Initial Torque : 17
Acceleration Sensitivity: 27
Braking Sensitivity: 27






Brake Balance:
7/6 ( personal BB) or for ABS 0 wheel : 6/4, for ABS 1 7/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/6 brake balance as starting point.



Notes :
Ferrari F40, the last great Ferrari IMO, no electronics aids, just pure man and machine :)

This car is one of my most favorite ride in GT5 and GT6, and it's well known for it's inaccuracy in terms of stats and stock setup.

I made this special replica build with the main goal of correcting the mistakes and make it handle more like a Ferrari, whatever that means :P

First of all, there are 2 region market for Ferrari F40, Europe and US. Both has distinctive setup from power, weight to gearing.

The US market has heavier dry weight, with added parts and interior + exterior modification to comply with US Federal regulations. To compensate for the added weight, US F40 also has higher power output and closer gearing. This gives US F40 roughly close performance to the EU F40 when both have cats installed ( catalytic converters ). All US F40 do not come with variable ride height system ( lift kit ) when sold, while the EU F40 factory delivered with the lift kit system. Several US F40 have been retrofitted with lift kit :)

This replica is a representation of US F40 with lift kit, EIBACH ERS springs installed and lowest reported corner weight ( dry ).

The power of US F40 from dyno reports of around just below 500HP to 503HP / 510PS with dry weight of 1286kg / 2835 lbs and 42/58 weight distribution.

To achieve the power figure, I decided to use Intake Tuning, this gives higher torque increase while replicating power.
I used it as I prefer stock turbo characteristics, use High RPM Range Turbo Kit instead, if you want lower torque / closer to real life torque at the expense of altered turbo characteristics and set power limiter at 99.4% - 503HP, 438.6 ft-lb.

For suspension, I have used EIBACH ERS springs at 8.25kg/mm front and 12.0kg/mm rear, maintaining spring ratio for the stock F40 spring rate, as the stock value can't be achieved. Damper setup for street and track, with ARB set for balance. Toe and camber has been setup with real world alignment values, based on F355 alignment which from report share similar alignment with F40 - closest information I can get :)

An alternate spring rate at 12kg/mm front and rear also provided, this is more oriented for high speed cornering and sweepers.

The real Ferrari F40 has ZF Self Locking LSD, based from Auto Motorsport review specs, the rear LSD has 60% lock, I have tuned likewise, with medium preload. The previous replica LSD which uses specs from Ferrari F355 with 45% lock and high preload also listed as optional.

Transmission has also been fixed, with correct US F40 ratios and final. Top speed of real F40 in US record at 324kmh/201mph has also been replicated, furthermore, the rolling acceleration time and vehicle speed at 5th gear 1000rpm has been closely replicated - similar to the tested reports from the magazine.

Various test results from Auto Motorsport mag :

60kmh-100kmh in 4th gear rolling acceleration : 6.3s
80kmh-120kmh in 5th gear rolling acceleration : 8.5s
5th Gear speed at 1000 RPM : 43.5kmh

F40 speed on each gear at about 7400-7700rpm optimal shift point :
1st 90kmh
2nd 144kmh
3rd 201kmh
4th 255kmh
5th 321+kmh

Feel free to try it at SSR7 :)

The F40 was extensively tuned/tested at Ascari, Tsukuba, Spa, Bathurst, Nordschleife, SSR7, Apricot Hill, Brands Hatch GP and Willow Springs.

I also managed to replicate the real life lap time of F40 at Tsukuba, done on Best Motoring at 1:03.73. The car easily do low 1:03s, while my best was 1:02s on comfort soft :D

Another real life at Suzuka record 2:25.27 in real life can easily be replicated, with my 1st lap at high 2:24s :P, also on comfort soft.



ENJOY :cheers:

UPDATE : Thanks to @danbojte for the invaluable input, a setup combo from the replica tune used on wheel ( G27 ) :

Suspension
Ride Height: 81 101 - track lowered
Spring Rate: 12.00 12.00 - High Speed Track Oriented Spring Rate
Dampers (Compression): 7 6
Dampers (Extension): 7 5
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33

Brake Balance : 6 / 4

LSD - Original Base Setup
Initial Torque : 40
Acceleration Sensitivity: 27
Braking Sensitivity: 27

Should work well for races



Real life vs GT6 Ride Height :

F/R 115mm / 115mm GT6 vs High Setting Lift Kit

View attachment 156919
View attachment 156928

F/R 101mm / 101mm GT6 vs Standard Lowered Setting Lift Kit

View attachment 156921
View attachment 156914

F/R 81mm / 101mm GT6 vs Track Lowered Setting Lift Kit

View attachment 156918
View attachment 156915

View attachment 156931
View attachment 156911

F/R 63mm / 56mm GT6 vs Dropped F40

View attachment 156906
View attachment 156910

UPDATE : Added LSD spec from Auto Motorsport Feb '89 review, and listed F355 LSD spec as optional.


Ferrari F40 '92 ( Real World Setup version ) EU Market Version

Special Build Replica with Real World Setup Ferrari F40 '92 EU Market version
Comfort Soft to Sports Medium




CAR : Ferrari F40 '92
Tire : Comfort Soft to Sports Medium

Specs - No Power Upgrade

Horsepower: 471 HP / 478 PS at 7000 RPM
Torque: 425.2 ft-lb at 4000 RPM
Power Limiter at : 100%
Weight: 1143 kg ( lowest dry weight )
Ballast : 31 kg
Ballast Position : -32
Weight Distribution : 42 / 58 as in real life ( dry weight )
Performance Points: 542

NO CATS Specs Option 1 ( Isometric Exhaust Manifold + High RPM Range Turbo Kit )
Horsepower: 513 HP / 520 PS at 6800 RPM
Torque: 451.5 ft-lb at 4500 RPM
Power Limiter at : 98.4%
Weight: 1143 kg ( lowest dry weight )
Ballast : 31 kg
Ballast Position : -32
Weight Distribution : 42 / 58 as in real life ( dry weight )
Performance Points: 554


NO CATS Specs Option 2 ( Isometric Exhaust Manifold + Intake Tuning )
Horsepower: 513 HP / 520 PS at 7000 RPM
Torque: 468.5 ft-lb at 4000 RPM
Power Limiter at : 98.9%
Weight: 1143 kg ( lowest dry weight )
Ballast : 31 kg
Ballast Position : -32
Weight Distribution : 42 / 58 as in real life ( dry weight )
Performance Points: 556



GT AUTO
NO Oil change
Wheels : Stock
Car Paint : Rosso Corsa



Tuning Parts Installed :
NO Cats replica power :
Optional High RPM Range Turbo Kit + Isometric Exhaust Manifold -- see notes for more details.
Optional Intake Tuning + Isometric Exhaust Manifold -- see notes for more details.

Suspension Fully Customizable Kit
Fully Customizable Dog Clutch Transmission
Adjustable LSD
Weight Reduction Stage 3
Window Weight Reduction



Suspension - Eibach ERS Springs with Street/Track Tuned Damper and Real World Alignment
Front, Rear

Ride Height: 101 101 - standard - Alternate Ride Height F/R : 63 56 ( lowest ), 115 115 ( high ) and 81 101 ( track lowered)
Spring Rate: 8.25 12.00 - Alternate High Speed Track Oriented Spring Rate F/R : 12.00 12.00
Dampers (Compression): 7 6
Dampers (Extension): 7 5
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33


DOG CLUTCH TRANSMISSION - Corrected EU Market Ratio Gear Set and Final
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed to 220kmh / 137mph ( lowest )
Adjust each gear :
1st 3.692
2nd 2.296
3rd 1.636
4th 1.284
5th 1.022
Final Gear : 2.727
Optimum Shift Point : 7400-7700 RPM ( as in real life )


OPTIONAL GEAR RATIO - Auto Motorsport Feb '89
DOG CLUTCH TRANSMISSION - Corrected EU Market AUTO Motorsport Mag 1989 Review Version Ratio Gear Set and Final
Install all power parts
Set Default
Set Final to 4.000
Set Auto Max Speed to 310kmh / 191mph
Adjust each gear :
1st 2.769
2nd 1.722
3rd 1.227
4th 0.963
5th 0.767
Final Gear : 3.620
Optimum Shift Point : 7400-7700 RPM ( as in real life )



LSD -ZF Self Locking LSD with 60% Lock and Medium Preload - AUTO Motorsport Mag 1989 Review Version
Initial Torque : 30
Acceleration Sensitivity: 36
Braking Sensitivity: 36

Alternate LSD Setup for looser handling :

Initial Torque : 27
Acceleration Sensitivity: 36
Braking Sensitivity: 36

or

Initial Torque : 20
Acceleration Sensitivity: 36
Braking Sensitivity: 36


OPTIONAL LSD SETUP F355 Spec :
LSD -ZF Self Locking LSD with 45% Lock and High Preload
Initial Torque : 40
Acceleration Sensitivity: 27
Braking Sensitivity: 27

Alternate LSD Setup for looser handling :

Initial Torque : 37
Acceleration Sensitivity: 27
Braking Sensitivity: 27

or

Initial Torque : 17
Acceleration Sensitivity: 27
Braking Sensitivity: 27






Brake Balance:
7/6 ( personal BB) or for ABS 0 wheel : 6/4, for ABS 1 7/6 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 7/6 brake balance as starting point.



Notes :
Ferrari F40, the last great Ferrari IMO, no electronics aids, just pure man and machine :)

This car is one of my most favorite ride in GT5 and GT6, and it's well known for it's inaccuracy in terms of stats and stock setup.

I made this special replica build with the main goal of correcting the mistakes and make it handle more like a Ferrari, whatever that means :P

First of all, there are 2 region market for Ferrari F40, Europe and US. Both has distinctive setup from power, weight to gearing.

The EU market has much lighter dry weight and comes with lift kit/variable ride height suspension system from factory, with lower final gear and slightly different 2nd and 5th gear :)

This replica is a representation of EU F40 with lift kit, EIBACH ERS springs installed and lowest reported corner weight ( dry ).

The power of EU F40 from dyno reports with cat installed of 471HP / 478PS / 478CV with dry weight of 1143kg / 2520 lbs and 42/58 weight distribution.

Some EU F40 do not have cats installed, usually the early years model, these non Cats F40 has been reported to have in excess of 500HP, some even dynoed with close to 520PS or 513HP.

To achieve the power figure of non cats EU F40, I decided to include 2 optional upgrades path, one uses high rpm range turbo kit and exhaust manifold, the other intake tuning and exhaust manifold. The specs are listed above.

For suspension, I have used EIBACH ERS springs at 8.25kg/mm front and 12.0kg/mm rear, maintaining spring ratio for the stock F40 spring rate, as the stock value can't be achieved. Damper setup for street and track, with ARB set for balance. Toe and camber has been setup with real world alignment values, based on F355 alignment which from report share similar alignment with F40 - closest information I can get :)

An alternate spring rate at 12kg/mm front and rear also provided, this is more oriented for high speed cornering and sweepers.

The real Ferrari F40 has ZF Self Locking LSD, based from Auto Motorsport review specs, the rear LSD has 60% lock, I have tuned likewise, with medium preload. The previous replica LSD which uses specs from Ferrari F355 with 45% lock and high preload also listed as optional.

Transmission has also been fixed, with correct EU F40 ratios and final. I have also added optional gear ratio setup from Auto Motorsport Feb'89 review. Both perform the same and can be used. Top speed of real F40 in US record at 324kmh/201mph has also been replicated, furthermore, the rolling acceleration time and vehicle speed at 5th gear 1000rpm has been closely replicated - similar to the tested reports from the magazine.

Various test results from Auto Motorsport mag :

60kmh-100kmh in 4th gear rolling acceleration : 6.3s
80kmh-120kmh in 5th gear rolling acceleration : 8.5s
5th Gear speed at 1000 RPM : 43.5kmh

F40 speed on each gear at about 7400-7700rpm optimal shift point :
1st 90kmh
2nd 144kmh
3rd 201kmh
4th 255kmh
5th 321+kmh

Feel free to try it at SSR7 :)

The F40 was extensively tuned/tested at Ascari, Tsukuba, Spa, Bathurst, Nordschleife, SSR7, Apricot Hill, Brands Hatch GP and Willow Springs.

I also managed to replicate the real life lap time of F40 at Tsukuba, done on Best Motoring at 1:03.73. The car easily do 1:02s comfort soft - slightly quicker than the US F40, as it should :D

Another real life at Suzuka record 2:25.27 in real life can easily be replicated.


ENJOY :cheers:

UPDATE : Thanks to @danbojte for the invaluable input, a setup combo from the replica USF40 tune used on wheel ( G27 ) :

Suspension
Ride Height: 81 101 - track lowered
Spring Rate: 12.00 12.00 - High Speed Track Oriented Spring Rate
Dampers (Compression): 7 6
Dampers (Extension): 7 5
Anti-Roll Bars: 4 4
Camber Angle: 0.5 1.8
Toe Angle: 0.33 0.33

Brake Balance : 6 / 4

LSD - Original Base Setup
Initial Torque : 40
Acceleration Sensitivity: 27
Braking Sensitivity: 27

Should work well for races



Real life vs GT6 Ride Height :

F/R 115mm / 115mm GT6 vs High Setting Lift Kit

View attachment 156919
View attachment 156928

F/R 101mm / 101mm GT6 vs Standard Lowered Setting Lift Kit

View attachment 156921
View attachment 156914

F/R 81mm / 101mm GT6 vs Track Lowered Setting Lift Kit

View attachment 156918
View attachment 156915

View attachment 156931
View attachment 156911

F/R 63mm / 56mm GT6 vs Dropped F40

View attachment 156906
View attachment 156910

UPDATE : Added LSD spec from Auto Motorsport Feb '89 review, and listed F355 LSD spec as optional.
Added optional gear ratio setup from Auto Motorsport Feb '89 review, works just as good as the original setup.
 
Tatsuya Shima RUF CTR Yellowbird "Blackbird" '87 Wangan Midnight
ISHIDA ARC 500HP

Tuned to replicate Wangan Midnight Blackbird Ishida Arc 500HP
Comfort Soft




CAR : RUF CTR Yellowbird '87
Tire : Comfort Soft

Specs

Horsepower: 500 HP / 507 PS at 6000 RPM
Torque: 463.5 ft-lb at 4500 RPM
Power Limiter at : 99.9%
Weight: 1165 kg
Ballast : 101 kg
Ballast Position : 50
Weight Distribution : 38 / 62 as in real life
Performance Points: 540



GT AUTO
NO Oil change
Improve Body Rigidity ( INSTALLED in this build ) - MANDATORY - the Blackbird has roll cage in the manga + anime.
Wheels : +1 Inch Up BBS RS or OZ Racing Botticelli III painted in Saddle Tan ( from Chevrolet Corvette Coupe C2 '63 )
Car Paint : Black


Tuning Parts Installed :
Racing Exhaust
Low RPM Range Turbo Kit
Suspension Fully Customizable Kit
Adjustable LSD
Weight Reduction Stage 3
Carbon Hood ( Body Color )
Racing Brakes Kit




Suspension - Swift Springs with Street/Track Tuned JRZ RS Pro Coilover Damper
Front, Rear

Ride Height: 110 123 - Real life based - Alternate Ride Height F/R : lowered 110 110 or street 123 123 ( Loose )
Spring Rate: 10.00 12.98 - Alternate Track Oriented Spring Rate F/R : 10.00 13.75
Dampers (Compression): 7 6
Dampers (Extension): 5 5
Anti-Roll Bars: 3 1
Camber Angle: 0.3 0.3 ( use zero camber for max grip )
Toe Angle: -0.18 0.35




LSD -Paul Guard LSD 30/80
Initial Torque : 22
Acceleration Sensitivity: 20
Braking Sensitivity: 48





Brake Balance:
2/3 ( personal BB) or for ABS 0 wheel : 3/3, for ABS 1 4/4 or feel free to use your preferred brake balance.

Recommended setting for DS3 user :
Steering sensitivity at +1 or +2, all aids off, except ABS 1 ( if not comfortable with ABS 0 ) with 4/4 brake balance as starting point.



Notes

Shima's Blackbird, this version is from Ishida story arc with 500HP. Low RPM turbo kit has been installed to reach the power.

For this replica, I used real life springs ratio, taken from 930 Turbo with JRZ RS Pro Coilover Damper kit, Swift main springs and helper springs were used. I adapted the setup with stiffer spring rate as the real car has 1040kg dry weight, and this Blackbird tips the scale at 1165kg. I have to add ballast and install weight reduction as I wanted to also replicate the real car weight distribution at 38/62. Some even reported to have 37/63 with mods, but I can't afford to have that as it will increase the weight even more.

Damper has been tuned in to support the new weight balance, rear damper is set to give the best possible traction on medium speed to high speed corners as it will live as a Wangan car. Front damper has also been set stiffer compared to the early stage version.

LSD uses Paul Guard with 30/80 setup, I adapted the LSD with medium locking on acceleration and high locking on braking side, preload also on medium. A balance for comfort and sports tire.

Gearing remains stock, as I felt the top speed is more than adequate.

I tuned and tested the car at various tracks from Tsukuba, SSR7, Ascari, Willow Springs, Bathurst, Brands Hatch GP, and Silverstone GP.

The Blackbird also tested at SSR7, and I like it there, drives very well on comfort soft :P

I look forward for feedback on the car - power figure and visual parts :



ENJOY :cheers:
|iB|Supercar Festival|SS|Camber|ABS 1 (4/5)|Lowered RH|Track Oriented SR|Winner| 👍
 
Back