- 3,514
- London, ON
- A_Mindful_Place
Show off your customized cars!
- Thread starter hejustsits
- 1,837 comments
- 270,339 views
- 921
- United States
- Blood_Raven_70
*Paint is a dark green overlay on Carbon Fiber at 25% opacity (difficult to tell in this shot, though)
*The cards on either side and on the hood were all made individually.
*The number plate on either side and on the hood have the ubiquitous "WELCOME TO LAS VEGAS" sign and a silhouette of the skyline of Las Vegas, both at 70% opacity, behind the number (again, difficult to tell in this shot).
- 921
- United States
- Blood_Raven_70
- 7,077
- Jakarta
How did you do that ?
- 921
- United States
- Blood_Raven_70
- 90
- Switzerland
ICEYOU3
(Banned)
- 2,031
- Selatapura, Usea
- 921
- United States
- Blood_Raven_70
And if you change the opacity level down to say 20%, it'll give a different effect. Sometimes, it'll start to be a really cool silver looking carbon fiber color. And then play around with other colors to see what different shades you can do.I tried it. So here's my LaFerrari with a ''Half matte white carbon'' body
View attachment 1185816View attachment 1185815
Also, when you go down that low on the opacity, the colors start to change and really aren't what the original color is due to the carbon fiber messing with the shade of the color.
- 1,437
- GDL, Mexico
- Insomniac_driver
Group B tuned Suzuki swift sport:
Last edited:
- 292
- Puerto Rico
- snowmanpr
Double Judgement
- 91
- Finland
- 1,553
- Australia
- linksracer
Nissan Silvia S15 with the 2JZ-GTE swap. Sitting on a set of Chrome faced BBS LM's and painted in Toyota's Lightning Yellow. This tune makes about 777hp which is quite a lot for the RWD platform. I've managed to tune a lot of the oversteer out through suspension and differential settings, however the car requires a lot of patience on throttle as it is capable of breaking traction in most gears despite having wide tyres. High speed corners seem to be its strongest area, likely a result of the High-Level wing and diffuser keeping the rear end glued to the track at high speed.
- 3,514
- London, ON
- A_Mindful_Place
My girlfriend has this little dinky car that reminds her of her father's old 1970 Hillman Avenger. The colour reminds her of it. The dinky car, however, is in fact a Mazda Roadster which I took the joy in recreating in the game last night. We both had a blast ripping it around Tokyo!
Attachments
- 1,901
- London
- DEAD_DULLAH123
- hyperspeed980
"Godzilla Prowls"
- 5,175
- Manila
- Filracer
Back with a new set of JDM builds.
JDM build #31
JDM build #32
JDM build #33
JDM build #34
JDM build #35
JDM build #31
2020 Honda Civic Type R. We started working on this car by adding all race ready parts for the cars such as a custom race ready KW suspension, Yokohama race tires, a body kit that's built for competition, and a custom race brake provided by Brembo. We beefed up the engine to 500 horsepower but due to the WTC 700 rules we had to bring it down to a respectable 397 horsepower thanks to the custom power restrictor that our guys made for the car. We also shaved about 600 lbs on the car by removing the unnecessary things on the car. We top it off by making a KCMG livery fit for the FK8 Civic Type R's body.
JDM build #32
1997 Nissan Skyline GT-R R33 V • spec. We gave it a mix of Nismo and HKS parts on this bad boy including a Fujitsubo exhaust and Brembo brakes. The car is then given a custom body kit to make it look aggressive along with a custom GT Wing. A carbon hood and trunk has also been installed on the car to complement it with the grey gloss paint and to finish this build off a set of BBS LMs are equipped to make sure this R33 is ready for the looks and racing.
JDM build #33
The 2014 Subaru WRX STI gets souped in this one. A custom body kit has been made by Varis themselves including the wide fenders. We then give it a set of 19 inch BBS RI-As and a custom livery with Crystal White Pearl finish to complete its looks so it can stand out. For the performance the engine upgrade and turbo has been done by Precision Turbo and Engine while the rest are as follows; EvoX exhaust, CSF intercooler, Cobb ECU, Airaid air intake and filters, Prodrive custom suspension combined with H&R springs and coilovers, Brembo brakes, and a custom Kotouč gearbox. This WRX is ready to roll.
JDM build #34
2015 ND gen Mazda Roadster. This car is already looking ready to do its thing but we decided to spice it up further. A clean bodykit has been installed on this car with a lip spoiler and a set of 17 inch Work Emotion D9Rs then we painted it with the Soul Red Crystal body paint and added some side stripes. Most of the performance parts installed have been made possible by Mazdaspeed but the one that stands out on this build is the custom LT1 6.2 V8 engine that was taken from a C7 Corvette then modified by Edelbrock with their E-Force Stage 3 Supercharger kit.
JDM build #35
The second generation 86 aka the Toyota GR86. Just like its twin the Subaru BRZ we went for a drift build on this one. We first swapped its engine out for a tuned 2JZ engine that packs a punch all made possible by C&Y Sports with their specialization on tuning up a 2JZ engine. We added a GReddy bolt on turbo kit made for the 86 in mind then a Injen throttle controller, J's Racing Hyper ECU, and a Borla exhaust. For the suspension and other performance parts we made and used our own custom parts and H&R springs to finish up the performance upgrades on the car. As for the visual looks we gave it custom fenders then the custom side skirts, rear diffuser, front splitter, and spoiler are all made possible through Toyota's own GR Parts selection and to top it off a set of 18 inch Enkei Sport RC T5s and a carbon hood has installed on the car and there you have it a GR86 built for the skids.
- 3,514
- London, ON
- A_Mindful_Place
- 325
- United Kingdom
- hejustsitsthere
Similar threads
