GT Sport SVG request thread (Please read 1st post)

  • Thread starter daan
  • 10,545 comments
  • 580,833 views
Need to unzip this one. If you size one lot of text you can use the duplicate and replace method to keep all text the same relative size.

Popped you a DM, just wanted to say a big thanks for all of your work, much appreciated! You'll see the car in Content Creators race 3.
 
Anyone able to help convert this into a usable SVG for me? Much appreciate the help in advance!

I'm working on the Motus One 650S for the 2021 Britcar season and this is the logo I need for the tail end of the car. Someone has uploaded a copy of the logo but it's not done very well and there's a bunch of white bits included where they should be excluded, etc.
 

Attachments

  • Britcar.png
    Britcar.png
    20.4 KB · Views: 15
Anyone able to help convert this into a usable SVG for me? Much appreciate the help in advance!

I'm working on the Motus One 650S for the 2021 Britcar season and this is the logo I need for the tail end of the car. Someone has uploaded a copy of the logo but it's not done very well and there's a bunch of white bits included where they should be excluded, etc.
I've found it for my next Aston (team Brit) on a pdf
 

Attachments

  • britcar.svg
    6.4 KB · Views: 17
Hi needing a couple of logos converted to svg .

Thanks in advance.

The Jorg image..I just need the colour removed as its white on the car.

The Aleorn is background removed.

Thanks
 

Attachments

  • s-l400.jpg
    s-l400.jpg
    9.7 KB · Views: 18
  • D_NQ_NP_896367-MCO44464010048_122020-O.jpg
    D_NQ_NP_896367-MCO44464010048_122020-O.jpg
    21.7 KB · Views: 17
Hi needing a couple of logos converted to svg .

Thanks in advance.

The Jorg image..I just need the colour removed as its white on the car.

The Aleorn is background removed.

Thanks
I wasn't sure when you said "no background" for the aleorn logo if you meant the pattern. So you have the choice to use it or not (duplicate/replace to align)
 

Attachments

  • jorgnobackground.svg
    12.6 KB · Views: 22
  • mezcalalerontext 2.svg
    12.3 KB · Views: 18
  • mezcalaleronpattern 2.svg
    13.4 KB · Views: 22
thanks a lot mate !!!
I've made some alignment corrections ("smart alarms" part)
And I don't know exactly why but the gradient with the logo above the text looks lighter.
If you don't care, fine. If not, here's the text only you can use with the logo previously uploaded.
And the corrected svgs

0F232131-FF0E-41F4-AC47-3840A21553ED.jpeg
 

Attachments

  • verisurefull.svg
    14.2 KB · Views: 14
  • verisurefull2.svg
    14.5 KB · Views: 17
  • verisuretext.svg
    8.4 KB · Views: 16
Last edited:
Hi. I'm having trouble getting the file size of two decals down to 15kb. I've tried SVGOMG Optimised for GTS to get the file size down, and even at min settings, it's over 15kb. Do these two logos look like 80kb to anyone else, or am I doing something terribly wrong?


Thanks in advance.

*this is not at all a cheap plug for the Car of the Week thread, where we race every Tuesdays at 10 P.M. CST and write reviews for a car each week, and everyone is welcome to join us.
 

Attachments

  • COTW meddling V1 mask.svg
    79.1 KB · Views: 19
  • COTW meddling V1.svg
    82.2 KB · Views: 16
Hi. I'm having trouble getting the file size of two decals down to 15kb. I've tried SVGOMG Optimised for GTS to get the file size down, and even at min settings, it's over 15kb. Do these two logos look like 80kb to anyone else, or am I doing something terribly wrong?


Thanks in advance.

*this is not at all a cheap plug for the Car of the Week thread, where we race every Tuesdays at 10 P.M. CST and write reviews for a car each week, and everyone is welcome to join us.
Impossible in only one decal.
I split them in two parts. Use duplicate/replace to align them
 

Attachments

  • COTW meddling V1 mask part1.svg
    14.2 KB · Views: 19
  • COTW meddling V1 mask part2.svg
    11.6 KB · Views: 20
  • COTW meddling V1 part2.svg
    11 KB · Views: 18
  • COTW meddling V1 part1.svg
    11.7 KB · Views: 17
@krisduv you freaking wizard! Not only are you good at photography, but also with decals?! Thank you so much!

May I ask what else you did other than chopping it into two? I'd like to learn so I don't have to come here and bother others as much as possible, thank you.
 
@krisduv you freaking wizard! Not only are you good at photography, but also with decals?! Thank you so much!

May I ask what else you did other than chopping it into two? I'd like to learn so I don't have to come here and bother others as much as possible, thank you.
Thanks ;)
In the non mask version, there were useless nodes behind the "car of the week" part probably due to (I'm not sure) the stroke of "car of the week" that was subtracted to the "COTW" part (sorry if it's not clear, it's my English skills:D)
In the mask version, I changed nothing. Just let the squares overlap so that you don't get a thin space between.

And then> SVGOMG
(Explaining it took me more time than doing it:boggled:)
 
Last edited:

Attachments

  • blacksheep bestbitter part1.svg
    11.8 KB · Views: 19
  • blacksheep paleale part1.svg
    14 KB · Views: 13
  • blacksheep paleale part2.svg
    9.8 KB · Views: 14
  • blacksheep bestbitter part2.svg
    10 KB · Views: 18
1617484320490.jpg 1617484201924.jpg 1617484076254.png 1617483987302.png 1617483901809.png 1617483787402.png 1617483787402.png 1617483712464.png 1617483608241.png 1617483491048.png 1617483397060.png 1617483312719.png 1617483190004.png 1617483075782.png 1617482952348.png 1617482897319.png 1617482728504.png 1617482670110.png 1617482596062.png nwdn_file_temp_1617481575803.jpg nwdn_file_temp_1617481395834.jpg nwdn_file_temp_1617481487615.jpg nwdn_file_temp_1617481115806.jpg 1617484201924.jpg
1617484320490.jpg
1617484201924.jpg
1617484320490.jpg 1617484201924.jpg
1617484320490.jpg
Hey guys! Ive taken a massive interest into Jelles Marble Racing and Marbula 1... Was hoping i could get these into some SVGs... I was planning on making GT3 cars into the various teams...
 
Hello fellow livery creators! I am writing to you, having a massive request. I need one more decal to finish my Bigazzi F1 GTR livery from 2h of Brazil 1996. This “Frisco” logo has been a huge pain to find and also I could only manage to find 2 potato quality pictures of it. I would much appreciate if somebody could make it into a SVG for me or even better if they are able to find a better quality picture before doing so. Thanks ever so much for your help and time!
44BB4878-77BB-4861-A40C-3DA5CA742D1F.jpeg
104B5F7E-A606-481F-9728-3339D02F96D2.jpeg
 
Last edited:
Hello fellow livery creators! I am writing to you, having a massive request. I need one more decal to finish my Bigazzi F1 GTR livery from 2h of Brazil 1996. This “Frisco” logo has been a huge pain to find and also I could only manage to find 2 potato quality pictures of it. I would much appreciate if somebody could make it into a SVG for me or even better if they are able to find a better quality picture before doing so. Thanks ever so much for your help and time!
View attachment 1002318 View attachment 1002319
The two pictures are a little different. The swirl underneath seems separate in the first and a continuation of the "o" in the other. If they are both from model cars it is possible that they also could not find it and used a similar font.
I did find this from WIPO which is a global brand database.
frisco.jpg

The "F" is different. It seems to be an Australian brand from a Brazilian parent company. First registered in 94 and now expired, it maybe the one. Colored it red and green. It may also be the wrong one and just looks similar.
 

Attachments

  • frisco.svg
    4.8 KB · Views: 17
Last edited:
The two pictures are a little different. The swirl underneath seems separate in the first and a continuation of the "o" in the other. If they are both from model cars it is possible that they also could not find it and used a similar font.
I did find this from WIPO which is a global brand database.
View attachment 1002329
The "F" is different. It seems to be an Australian brand from a Brazilian parent company. First registered in 94 and now expired, it maybe the one. Colored it red and green. It may also be the wrong one and just looks similar.

It looks brilliant, I can work with that. Thank you ever so much mate, you are saving me once again these days, what a legend! Thanks for you time mate I really appreciate it! Cheers!

*Edit* My livery is now done thanks to your contribution, here’s a glance of it:

B5C3442D-0951-4E33-A0F4-8BE40223D34A.jpeg

9A4CE4C3-71CA-48E7-9797-ACCBD4C1A530.jpeg
 
Last edited:
Can you please make decals for the below. I want to do a livery for the local straycat shelter:
Hope it can be done?

upload_2021-4-5_15-2-54.png

upload_2021-4-5_15-4-54.png

upload_2021-4-5_15-6-36.png
 
Back