"Team GTP" FORUM/CLUB CLOSING CHECK OP

crispychicken49
Hey ZR1, is it alright if I edit KillerD0505's stuff? I'm going to text him to find out what he wants to be.

I feel sick right now, maybe it can hold out to tomorrow? :dopey:

I can also help out with creating video's for our club too if that's alright. I own a capture card and a couple of high-end video editing software.

Sounds good Crispy. 👍
 
theotherspongey
Er, who edited my section? I put Controller (Soon to get wheel) and now it just says Controller.

Twas I.

crispychicken49
Same here. I think it's because when we get the wheel we should just update it up on there.

Ding ding ding.

We don't need specifics, what brand, model etc.

Just wheel or controller.
 
In my case it may be a while before I get my wheel, depending on when Fanatec release the CSR Elite. BTW, I just edited some of Killer's information, he's still deciding what job to take.

He wants Livery Designer because he liked it in NFSU. :scared:
He likes racer because he wants to be me. Double :scared:
Photographer because he has an iPhone. :lol:

I don't know, this may not end up well! :lol:
 
crispychicken49
In my case it may be a while before I get my wheel, depending on when Fanatec release the CSR Elite. BTW, I just edited some of Killer's information, he's still deciding what job to take.

He wants Livery Designer because he liked it in NFSU. :scared:
He likes racer because he wants to be me. Double :scared:
Photographer because he has an iPhone. :lol:

I don't know, this may not end up well! :lol:

No one will have a 'set in stone' job. Everyone will just make one mass contribution to the club.

No one is "stuck" with whatever they choose.

The list is just a way to make sure we have all our bases covered.
 
I know, I actually might help in with Tuning a lot also, I've taken an interest in that recently.

Okay, he wants to be a Decal Designer, and Photographer.
 
Last edited:
Looks like I am going to have to take the CSR apart to cover the spoke in carbon fiber.... Grrrr.

Oh no!! Poor you and your brand new CSR. :lol: You sure you want to take apart that brand new wheel?
Congrats on getting your wheel. How do you like it?
 
Yes Zoo, please tell us how it is. I currently use the MS licensed wheel and am pretty unsatisfied with it compared to my Logitech for PS3. I have been hinting at the wife that I want to get the CSR.

Since you have it, I assume it is available or have you been on a waiting list?
 
zr1chris
Oh no!! Poor you and your brand new CSR. :lol: You sure you want to take apart that brand new wheel?
Congrats on getting your wheel. How do you like it?

Ya it's nice. Just got it mounted but haven't turned it on yet. It feels incredibly solid, the buttons aren't too far apart from 9 and 3 (however I do have large hands, so for a woman or she-man/boy it might be an issue), and the "seam" is really not noticeable unless you go looking for it; despite ISR's review.

Taking it apart, wrapping it, and re-assembly is going to take a couple hours so that will be put off til this weekend once I am finished with mid -terms. I will post up some video of it then as well.

I ordered that suede seat you linked me to and I have also ordered a steel TV stand with black and red accents... Can you guess my color scheme? Lol.

MuchoJimbo
Yes Zoo, please tell us how it is. I currently use the MS licensed wheel and am pretty unsatisfied with it compared to my Logitech for PS3. I have been hinting at the wife that I want to get the CSR.

Since you have it, I assume it is available or have you been on a waiting list?

I pre-ordered the day it opened up. From what I understand they have plenty so there is currently no waiting list.

On Friday / Saturday I will post up pictures, videos, etc. I won't have time until then.

For now it is very solid, very light, and very attractive. It has a brushed aluminum spoke which looks much better in person than in the videos and pictures on the net. My wife likes the look but I am going to at least wrap it and determine which I like better.


HELLAFLUSH240SX
Also, Im from Chicago GMT-5

And Im a painter/drifter/photographer
Put it in the Google Doc.
 
I must say, while the MS Wheel is no Fanatec, it gets the job done and works nice. I have been using it again ever since my Fanatec broke. Will pick up a CSR when the wife permits.
 
sounds fun iv been lookin for some serious racers for a long time MKN WeeD101 is my gamertag hit me up..im good at drift,tune,photos,paint...thanks for your time see u guys at the track
 
I must say, while the MS Wheel is no Fanatec, it gets the job done and works nice. I have been using it again ever since my Fanatec broke. Will pick up a CSR when the wife permits.
Agree, rather the MS wheel than the controller (sorry joystick users). The thing about it that drives me crazy is the huge lower part, where the push down clamp is. Also the FFB is weak, of course I only compare to my logitech that was actually cheaper.

And by the way Bogie, no more giving the MS wheel credit, once the wife sees that, my dreams of a CSR are done..................:nervous:
 
I wonder when the CSR Elite will be up for pre-order? I need to count my money to make sure I got enough for when it releases.

Checked my money. Can someone tell me why at the start of the year I had 750 Euro's, middle of the year I had 200 Euro's, and now I have 15 Euro's? Damn leprechauns!
 
Last edited:
Im also interested in the wheel game. The CSR seems to be a good candidate because it can function for both PS3 and Xbox. Also I want a wheel stand or cockpits of some sort. I don't want to spend to much. Any suggestions?
 
Updated my info at Google Docs. Zoo, any chance you would be willing to give the spreadsheet an official name instead of Copy of Spreadsheet? ;) I would have, but I didn't want you to kick me :)

Just the anal me.
 
I just updated the google doc with my information. Since I just sold my G27 because of the non support between Microsoft and Logitech, I will be playing with a controller until I get a MS Wheel. Finally jumped ship! I will be getting my copy in a hour at Wal-Mart near work. See you guys then!
 
Just updated my info. I will be using a controller for the first week or two, then I'll get my XCM converter and use my G25. I won't get FM4 until the 13th because of these stupid regional release dates... urghhh still I'll be there eventually.
 
I can't believe I'm number 69. :lol:

Home sick from work, so I decided to poke it in. Wasn't thinking straight about my car number, was guessing a thousand members in the group.
 
I just updated the google doc with my information. Since I just sold my G27 because of the non support between Microsoft and Logitech, I will be playing with a controller until I get a MS Wheel. Finally jumped ship! I will be getting my copy in a hour at Wal-Mart near work. See you guys then!

Really glad to see a familiar face in the club, our club's shaping up to be quite... fierce.
 
Tenacious D
I can't believe I'm number 69. :lol:

Home sick from work, so I decided to poke it in. Wasn't thinking straight about my car number, was guessing a thousand members in the group.

Thats Spagetti's #
 
Tenacious D
I can't believe I'm number 69. :lol:

Home sick from work, so I decided to poke it in. Wasn't thinking straight about my car number, was guessing a thousand members in the group.

Please read, and then re-read, the OP.
 
How about the first official club meeting this weekend. I know I'm not any event organizer or anything like that. I was just thinking that that is when everyone will probably have the game and available time to play it.
 
Back