- 5,511
- Druids Bend
- Z4E_Midnight85
The Midnight Collection
- Thread starter MidnightRun85
- 154 comments
- 54,640 views
- 5,511
- Druids Bend
- Z4E_Midnight85
Advan RE Amemiya FD3S
This one is based on a concept created by Hugo Silva Designs. He came up with the idea of a poster design featuring a modified RX-7 with a red and white Advan livery. I felt like that would translate well onto the 1000+ hp RE Amemiya which I've been using for high speed runs at SSRX.
Starting with the best Mazda colour, Soul Red Crystal, this simple livery uses a largely two-tone approach, with a drift-style angle to the layout. The decals are semi-gloss to add some texture difference as well.
The massive Advan logo stretches along the sides of the bodywork and dominates the real estate perfectly. Smaller sponsor decals pop up around the car to finish it all off.
Of course this had to sit on Work Wheels to give it that JDM drift feel.
Download it here.
This one is based on a concept created by Hugo Silva Designs. He came up with the idea of a poster design featuring a modified RX-7 with a red and white Advan livery. I felt like that would translate well onto the 1000+ hp RE Amemiya which I've been using for high speed runs at SSRX.
Starting with the best Mazda colour, Soul Red Crystal, this simple livery uses a largely two-tone approach, with a drift-style angle to the layout. The decals are semi-gloss to add some texture difference as well.
The massive Advan logo stretches along the sides of the bodywork and dominates the real estate perfectly. Smaller sponsor decals pop up around the car to finish it all off.
Of course this had to sit on Work Wheels to give it that JDM drift feel.
Download it here.
- 5,511
- Druids Bend
- Z4E_Midnight85
Bilstein AMG GT3 '20 (GTWS)
A fictional entry to the 2020 Fanatec GT World Series - my own take on the many Bilstein liveries seen over the years.
I took inspiration from numerous sources, namely 811 Design and Bezerk Design, who've both completed various Bilstein liveries for various European series. I wanted to stick with the geometrical shape approach and introduce a fourth colour - opting for a manufacturer-correct silver to bring some metallic flare to the otherwise simple flat (but bright) colours of the branding.
I wanted to ensure this really pops, so there's masses of contrast between the four colour elements, plus numerous stripe transitions to bring life to the livery.
The sponsor count has been kept low to ensure it looks right, and not overdone.
Download it here.
A fictional entry to the 2020 Fanatec GT World Series - my own take on the many Bilstein liveries seen over the years.
I took inspiration from numerous sources, namely 811 Design and Bezerk Design, who've both completed various Bilstein liveries for various European series. I wanted to stick with the geometrical shape approach and introduce a fourth colour - opting for a manufacturer-correct silver to bring some metallic flare to the otherwise simple flat (but bright) colours of the branding.
I wanted to ensure this really pops, so there's masses of contrast between the four colour elements, plus numerous stripe transitions to bring life to the livery.
The sponsor count has been kept low to ensure it looks right, and not overdone.
Download it here.
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
Castrol Mazdaspeed Atenzda Gr3 Road Car
When the Atenza Gr3 became the lucky recipient of the 787B engine swap, I couldn't resist the urge to create a GT3-style livery for it.
I opted for the a recreation of the 1994 Castrol Mazdaspeed Lantis/323F from that year's JTCC.
It was an uncompetitive chassis and didn't receive many accolades, but I think the livery works well on the Atenza.
The livery itself is a simple two-stripe over white livery, with asymmetric design in plan view, and works so well in its simplicity.
Rays centrelock alloys finished in satin black complete the GT3 look, while the interior can still seat 5 in comfort!
Download it here.
When the Atenza Gr3 became the lucky recipient of the 787B engine swap, I couldn't resist the urge to create a GT3-style livery for it.
I opted for the a recreation of the 1994 Castrol Mazdaspeed Lantis/323F from that year's JTCC.
It was an uncompetitive chassis and didn't receive many accolades, but I think the livery works well on the Atenza.
The livery itself is a simple two-stripe over white livery, with asymmetric design in plan view, and works so well in its simplicity.
Rays centrelock alloys finished in satin black complete the GT3 look, while the interior can still seat 5 in comfort!
Download it here.
Last edited:
- 5,511
- Druids Bend
- Z4E_Midnight85
GT by Citroën GT3 ('14 C-Elyseé Touring Car Edition)
A while back, @Nakano219's weekly race randomizer picked the GT by Citroën Gr.3 for one of the races. It's a car I've barely used and was sitting there, wanting a new lease of life. I did a bit of research into Citroën race cars and came across the 2014 C-Elyseé from the WTC. The concept livery was very simple but quite powerful in its simplicity - perfect for the complicated shape of the GT by Citroën!
To give it a little more life, I decided to use an Aluminium Metallic base layer, with the white, red and black decals layered over it giving some textural contrast.
In the end, the livery remains true to the original but works wonders for this love-it-or-hate-it Gr.3 car.
Download it here.
A while back, @Nakano219's weekly race randomizer picked the GT by Citroën Gr.3 for one of the races. It's a car I've barely used and was sitting there, wanting a new lease of life. I did a bit of research into Citroën race cars and came across the 2014 C-Elyseé from the WTC. The concept livery was very simple but quite powerful in its simplicity - perfect for the complicated shape of the GT by Citroën!
To give it a little more life, I decided to use an Aluminium Metallic base layer, with the white, red and black decals layered over it giving some textural contrast.
In the end, the livery remains true to the original but works wonders for this love-it-or-hate-it Gr.3 car.
Download it here.
Last edited:
Similar threads
