- 301
- unknown
Could be possible create a Bikernieki Short Oval Circuit "Reverse"?
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 145,683 comments
- 43,069,568 views
- 360
- Joensuu
- 39
- Canada
- killhop420
Has anyone seen extra paint options for Esprit's R32?
- 301
- unknown
Whole CM shaders settings are default? I understand that you have other cars that works just to narrow down which issue can be caused by spoon. Every track combination same issue? With or without rain activated?Sorry to have to report it, but black glass is still there for me.
Last edited:
- 264
- Turkey
- 301
- unknown
Please to understand which is the cause:
make a backup of ext_config.ini inside car extension folder and put this one.
Remove .txt
make a backup of ext_config.ini inside car extension folder and put this one.
Remove .txt
- 298
- Italy
The NSX I got (somewhere from here) is ver. 1.6 (and maybe it's not even the last available), yours is ver. 1.3
I didn't check the other cars
- 850
- Germany
- 287
- California
- ish1tyounot
update
- 117
- Greece
Hi! Now I agree 100 % with you. Bugs are part of the life-cycle of any software, so anybody using a computer for a while will end up with at least some basic troubleshooting skills.
However, if the CSP features are optional, instead of mandatory (as when they are in a config), it's not only easier to troubleshoot the occasional issues related to CSP, but also the mod could still be used while the issue is ironed out. Except in the case of mods that rely on CSP encryption, of course.
Cheers!
- 569
- Argentina
As some of you may remember, I'm doing driver kits and gloves for my whole cars library (2087 cars).
Starting from 1923, I'm now in 1991 and have covered 1/4 of my cars.
The whole library is quite heavy to upload, and most of all, too customized for my own library to make it easy for others to install.
However, if anyone in the forum needs a specific driver skin (say, for the 1989 Audi 90 Quattro GTO) you can ask me on PM, and I'll see what I can do.
Cheers!
Starting from 1923, I'm now in 1991 and have covered 1/4 of my cars.
The whole library is quite heavy to upload, and most of all, too customized for my own library to make it easy for others to install.
However, if anyone in the forum needs a specific driver skin (say, for the 1989 Audi 90 Quattro GTO) you can ask me on PM, and I'll see what I can do.
Cheers!
- 33
- Algeria
Hello everyone ! I just created an account and wanted to say thanks to everyone involved in this topic !
Been following it since few months, and I've known GTPlanet since 7 years now, when I was playing GT6 and looking for good tuning guides.
Hope to see more from the community which I feel is always growing for a game that's 6 years old, crazy stuff what has been achieved !
Thanks again !
Been following it since few months, and I've known GTPlanet since 7 years now, when I was playing GT6 and looking for good tuning guides.
Hope to see more from the community which I feel is always growing for a game that's 6 years old, crazy stuff what has been achieved !
Thanks again !
- 301
- unknown
Please make a backup and try this inside car folder \extension\ext_config.ini
P.S.
Trouble/issue only with VR?
@Masscot try that file please, it disable everything and preserve only wiper animation on windscreen
Last edited:
hellothankyou
(Banned)
- 110
- Costa Rica
@JakubP @flyingsaucer - you can make this mod very nicely, just a few things noticed after downloading
(i write to help you spot the areas for improvement, not to empty criticize - I am still learning too, started just a few weeks ago!)
I downloaded the car , run it in Assetto Corsa ... and
1. stopped in the pits at Opaque Windscreen (all gray to me) -> thankfully it's not as hard to fix as other quirks.
unpacked it, imported to Blender and by the way re-added missing honda badge, adjusted roof antenna etc (just for my taste)
- windscreen fixed
2. the size of original kn5 is 230MB -> i have reduced it to 100 MB (still WOW but much betta for a quick start
)
3. "Spoon" banner is invisible from the cockpit and the lhd wipers even exaggerate the effect - but they work in csp 1.66_2, so should also in 1.67_1(great!)
4. wipers are from lhd (left hand drive car) , but this civic is rhd (see screenshot)
- take the wipers eg. from civic type-r ek2 and fix/adjust
I'd love to help myself, but
1. dashboard and tyres of that car are messed up on importing to Blender (so it would require even more workarounds from me)
2. i can't upload such big files (even compressed) here.
3. time resticted.
Fingers crossed!
(i write to help you spot the areas for improvement, not to empty criticize - I am still learning too, started just a few weeks ago!)
I downloaded the car , run it in Assetto Corsa ... and
1. stopped in the pits at Opaque Windscreen (all gray to me) -> thankfully it's not as hard to fix as other quirks.
unpacked it, imported to Blender and by the way re-added missing honda badge, adjusted roof antenna etc (just for my taste)
- windscreen fixed
2. the size of original kn5 is 230MB -> i have reduced it to 100 MB (still WOW but much betta for a quick start
)3. "Spoon" banner is invisible from the cockpit and the lhd wipers even exaggerate the effect - but they work in csp 1.66_2, so should also in 1.67_1(great!)
4. wipers are from lhd (left hand drive car) , but this civic is rhd (see screenshot)
- take the wipers eg. from civic type-r ek2 and fix/adjust
I'd love to help myself, but
1. dashboard and tyres of that car are messed up on importing to Blender (so it would require even more workarounds from me)
2. i can't upload such big files (even compressed) here.
3. time resticted.
Fingers crossed!
Last edited:
- 301
- unknown
@JakubP @flyingsaucer - you can make this mod very nicely, just a few things noticed after downloading
(i write to help you spot the areas for improvement, not to empty criticize)
I downloaded the car , run it in Assetto Corsa ... and
1. stopped in the pits at Opaque Windscreen (all gray to me) -> thankfully it's not as hard to fix as other quirks.
unpacked it, imported to Blender and by the way re-added missing honda badge, adjusted roof antenna etc (just for my taste)
- windscreen fixed
2. the size of original kn5 is 230MB -> i have reduced it to 100 MB (still WOW but much betta for a quick start
3. "Spoon" banner is invisible from the cockpit and the lhd wipers even exaggerate the effect - but they work in csp 1.66_2, so should also in 1.67_1(great!)
4. wipers are from lhd (left hand drive car) , but this civic is rhd (see screenshot)
- take the wipers eg. from civic type-r ek2 and fix/adjust
I'd love to help myself, but
1. dashboard and tyres of that car are messed up on importing to Blender (so it would require even more workarounds from me)
2. i can't upload such big files (even compressed) here.
3. time resticted.
Fingers crossed!
We can work togheter no issue or trouble for me. You have found two front windscreen?
I've created 3, Windscreen, Internal and Damage Glass.
- 6,953
- The Bunker
Sorry, on mobile atm
- 850
- Germany
- 301
- unknown
@hellothankyou
Maybe some windscreen parameters is not set as "NO SHADOW".
I think 3 front glass are needed to obtain windscreen/wipers, raindrops, damage glass.
In this way this car works with and without "USE NEW WINDSCREEN EFFECT".
Maybe some windscreen parameters is not set as "NO SHADOW".
I think 3 front glass are needed to obtain windscreen/wipers, raindrops, damage glass.
In this way this car works with and without "USE NEW WINDSCREEN EFFECT".
Last edited:
- 2,053
- Le Mans
Yours mods aren't free now? (Paypal to get?) So that they come from other modders or games?
Edit:
You're not a little bloated while you too go to cs.rin.ru
En français: "Tes mods ne sont plus libres? (Obligé de payer Paypal?) Alors qu'ils viennent de d'autres moddeurs ou d'autres jeux?
T'es un peu gonflé alors que t'es un habitué de cs.rin.ru pour télécharger des mods payants...
C'est pas un donation que tu demandes, c'est un paiement !!!!
Last edited:
- 569
- Argentina
Hi Diego! In almost every scenario, you can place the glove files (2016_Gloves_DIFF and 2016_Gloves_NM) inside the skin of each car.
- 1,362
Installed the ini file, still an opaque black windscreen.
- 301
- unknown
Thanks a lots for testing so it depends by a 3d object inside the scene, some material shader or parameter. Only in VR?
- 1,362
I just switched to the screen, without VR. Still opaque front windshield.
- 1,362
hellothankyou
(Banned)
- 110
- Costa Rica
Thanks, i would love to contribute and i already got things working on my side (talking about the windshield), just i'm not able to upload my kn5 files here. (and as i mentioned, there is issue with dashboard and tyres on importing to Blender - i think because we use different 3D software).
If you can swap the rhd wipers and adjust it,and fix other minor bugs like windshield banner(Spoon) - it will take much less time than adjusting my compatibility issues with importing this model to Blender. So, cheer up!
BTW just one more hint - if you gonna take wipers from that civic type-r ek2 (they are correct rhd wipers), remove some mesh leftovers from right wiper.
bigger picture (if it helps to locate this):
@flyingsaucer @JakubP - All in all, guys, you're doing a very fun project/update to a car, and you can take all the time you want to fix the few bugs. No need to hurry to release. It's always learning. Fingers crossed!
Last edited:
Similar threads
