Absolutely yes!
Did you know Ilja is the second richest man in Russia, despite he has to give a percentage from his Patreon to Putin.
And poor Russians think he is just a game developer.
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 139,859 comments
- 38,586,811 views
Absolutely yes!
Did you know Ilja is the second richest man in Russia, despite he has to give a percentage from his Patreon to Putin.
And poor Russians think he is just a game developer.
Hey Tomo,This is fantastic, thank you so much!
I actually don't have RainFX... I know it's a paid mod, where do I get it as I'd like to pay for it?
Thanks! Coming close to a proper release now with all this
thx for sharing your work.
I just took a quick look on your newest release from RD with an 3D editor and realized a lot of objects could be massive and the grass should be "dirty" instead of a normal road feeling. So, I renamed a few objects and put yorkshiregrass as ORIGINAL_GRASS_MATERIALS in config.
Untested as my GPU is still junk. So, backup your old kn5 file first.
Test yourself please and keep it if you like. If not, throw it away...
https://we.tl/t-PMbqv3eMWj
- 93
- France
- 4,156
- Ottawa
, I hope you get what you are looking for, welcome to the thread.
- 93
- France
You can ask to this guy Peter Boese on Discord in Troubleshooting > General
https://discord.com/channels/533310059405377546/533329935603859487
- 351
- United Kingdom
There is a file in the data folder of each car called ai.ini, you need to unpack and then rename the data.acd to see and then edit this file.
This file determines how the AI behave in that car, everything from when they change gear to how far ahead they need to look for braking, how much downforce they've got and so on. If you can match the pace of the AI in the Chivas cars, but are 4-6 seconds a lap faster than the AVR car, then this means that the AVR car probably hasn't got a very good AI configuration. For a simple test, you could copy the ai.ini from the Chivas car over the one from the AVR car. If you do this it's important to A) Keep a backup of the original AVR file and B) edit the gear up and down values based on the rev limiter of the AVR car (otherwise it may not move or may short shift).
- 700
- Australia
Because i'm myself a dummyand i like this citation : If you give a man a fish, he will feed once. If you teach a man to fish, he will eat for the rest of his life.
I think dummies like to learn and are proud to do things for themselves (like me)
Good to know you're enjoying the learnings, there are lots...
Just in case, and to avoid confusion, a 'dummy-walkthrough' is an expression used to imply something like, in this case, eg. 'beginner's guide'...
Anyone have a clue as to get drift cars to have lots of slip into corners? I ran some drift cars for fun on LA Canyons one day and found that this one without editing could do exactly what i wanted without any editing, but grips up on tracks.
https://static.wixstatic.com/media/...Chevrolet Chevette by Henrique Drifter f.webp
I tried editing the tyres, but to no alas.
https://static.wixstatic.com/media/...Chevrolet Chevette by Henrique Drifter f.webp
I tried editing the tyres, but to no alas.
- 114
- Monterrey, Nuevo León
Iowa Speedway v1.2
Talladega Superspeedway v1.1
Updated and added to my folder.
This update fixes the problem on those tracks that causes to not counting the lap while driving on the pitlane, and some textures and visual objects added/removed.
https://mega.nz/folder/SOAQVbDL#zAo0G0ix_Vg4r6KEg-_0wg
Talladega Superspeedway v1.1
Updated and added to my folder.
This update fixes the problem on those tracks that causes to not counting the lap while driving on the pitlane, and some textures and visual objects added/removed.
https://mega.nz/folder/SOAQVbDL#zAo0G0ix_Vg4r6KEg-_0wg
Last edited:
- 172
- England
- aceferrarifan1
Here is my power rework for the ACFL STC2000 pack:
https://www.mediafire.com/file/jmotcoujhgb2vtq/ACFL_STC2000_Power_Rework.zip/file
It's not entirely accurate to the actual Radical Macroblock V8's power and torque curves, but it's now at a lot more reasonable 375 Horsepower to the wheels, which is based on a 13% power-loss that AC uses. If someone has actual dyno data from Radical's Macroblock V8, please let me know as the STC2000 cars from this pack use a version of that engine modified to fit an FF Drivetrain. The chart that is included in Radical's promo for the engine is unfortunately too vague for me to get some precise numbers off it.
Original cars can be downloaded here; and the ACFL team have now patched the error with the Toyota's windscreen too!
https://www.mediafire.com/file/jmotcoujhgb2vtq/ACFL_STC2000_Power_Rework.zip/file
It's not entirely accurate to the actual Radical Macroblock V8's power and torque curves, but it's now at a lot more reasonable 375 Horsepower to the wheels, which is based on a 13% power-loss that AC uses. If someone has actual dyno data from Radical's Macroblock V8, please let me know as the STC2000 cars from this pack use a version of that engine modified to fit an FF Drivetrain. The chart that is included in Radical's promo for the engine is unfortunately too vague for me to get some precise numbers off it.
Original cars can be downloaded here; and the ACFL team have now patched the error with the Toyota's windscreen too!
- 435
- United Kingdom
RainFX by request for miseluk circuit by (Lemax)
Main Track v0.9: https://www.racedepartment.com/downloads/mišeluk.3383/
Gymkhana (drift) & 1-NA-1 (drag).: https://www.racedepartment.com/downloads/miseluk.13291/
This track does have a config file - Add this on the end of the; YourPC:\SteamLibrary\steamapps\common\assettocorsa\extension\config\tracks\loaded\miseluk.ini
[ABOUT]
AUTHOR = Cozy61
VERSION = 0.9 beta
DATE_RELEASE = 27th January 2021
NOTES = v0.9beta by Cozy61, Request for a rainfx version - Basic config of RainFX
[RAIN_FX]
PUDDLES_MATERIALS = ?road?, DetailRoad, rged_trotoar, skid, ?rmbl?
SOAKING_MATERIALS = ?road?, DetailRoad, rdax_ivicnjak, skid, ?rmbl?, grassblades, DetailRoadv
SMOOTH_MATERIALS = rdax_ivicnjak, rged_trotoar, stubovistart, znakovi, ?Auto?, ?rmbl?, grdr_branik, orig_bilbord, KolaLow, kontejneri, ?merenjevremena?, kenworth, SuzukiSC, DetailRoad
ROUGH_MATERIALS = ?grass?, gume
LINES_MATERIALS = DetailRoad
STREAM_EDGE_... = -515.17, 8.68, -231.18, -523.13, 8.67, -238.47
STREAM_EDGE_... = -516.65, 8.46, -246.73, -510.46, 8.54, -252.93
STREAM_EDGE_... = -494.1, 9.85, -236.64, -485.4, 9.82, -244.08
STREAM_POINT_... = -517.85, 9.44, -241.15
Installation Help
If you want to move/copy the track config from the loaded tracks folder you can;
1. Create and extension folder (all lowercase) in the track folder
2. Place or create an ext_config.ini file using Notepad or similar text editor
3. To create a save as *.ini file you need to switch the files from *.txt to *.* all files
4. Copy the rain FX text for your track and paste at the end of the existing or newly created ext_config.ini
5. Sometimes there will be other KN5 files that need to be in the extension folder for track lights etc.
6. Copy these from the yourPC:\SteamLibrary\steamapps\common\assettocorsa\extension\config\tracks\loaded folder and paste in the tracks extesion folder
7. To stop AC from getting confused. You can add the following to the beginning of the ext_config.ini file for each track;
Please Note: from time to time, configs in the tracks/loaded folder get updated so you may prefer to just have the rainfx as an ext_config in the track extension folder if you are not worried about a self-contained track or don't remember to check the track config on a regular basis
[BASIC]
IGNORE_OTHER_CONFIGS = 1
Hope that helps
Cozy61
Jan 2021
Main Track v0.9: https://www.racedepartment.com/downloads/mišeluk.3383/
Gymkhana (drift) & 1-NA-1 (drag).: https://www.racedepartment.com/downloads/miseluk.13291/
This track does have a config file - Add this on the end of the; YourPC:\SteamLibrary\steamapps\common\assettocorsa\extension\config\tracks\loaded\miseluk.ini
[ABOUT]
AUTHOR = Cozy61
VERSION = 0.9 beta
DATE_RELEASE = 27th January 2021
NOTES = v0.9beta by Cozy61, Request for a rainfx version - Basic config of RainFX
[RAIN_FX]
PUDDLES_MATERIALS = ?road?, DetailRoad, rged_trotoar, skid, ?rmbl?
SOAKING_MATERIALS = ?road?, DetailRoad, rdax_ivicnjak, skid, ?rmbl?, grassblades, DetailRoadv
SMOOTH_MATERIALS = rdax_ivicnjak, rged_trotoar, stubovistart, znakovi, ?Auto?, ?rmbl?, grdr_branik, orig_bilbord, KolaLow, kontejneri, ?merenjevremena?, kenworth, SuzukiSC, DetailRoad
ROUGH_MATERIALS = ?grass?, gume
LINES_MATERIALS = DetailRoad
STREAM_EDGE_... = -515.17, 8.68, -231.18, -523.13, 8.67, -238.47
STREAM_EDGE_... = -516.65, 8.46, -246.73, -510.46, 8.54, -252.93
STREAM_EDGE_... = -494.1, 9.85, -236.64, -485.4, 9.82, -244.08
STREAM_POINT_... = -517.85, 9.44, -241.15
Installation Help
If you want to move/copy the track config from the loaded tracks folder you can;
1. Create and extension folder (all lowercase) in the track folder
2. Place or create an ext_config.ini file using Notepad or similar text editor
3. To create a save as *.ini file you need to switch the files from *.txt to *.* all files
4. Copy the rain FX text for your track and paste at the end of the existing or newly created ext_config.ini
5. Sometimes there will be other KN5 files that need to be in the extension folder for track lights etc.
6. Copy these from the yourPC:\SteamLibrary\steamapps\common\assettocorsa\extension\config\tracks\loaded folder and paste in the tracks extesion folder
7. To stop AC from getting confused. You can add the following to the beginning of the ext_config.ini file for each track;
Please Note: from time to time, configs in the tracks/loaded folder get updated so you may prefer to just have the rainfx as an ext_config in the track extension folder if you are not worried about a self-contained track or don't remember to check the track config on a regular basis
[BASIC]
IGNORE_OTHER_CONFIGS = 1
Hope that helps
Cozy61
Jan 2021
Last edited:
Wow, thanks a lot!!!
- 172
- England
- aceferrarifan1
As I said, the power has been reduced but it is not entirely accurate due to lacking a fully-plotted-out Dyno chart for the Radical Macroblock V8; specifically the RXC Spyder version with 431 horsepower since that is the base version of the engine that appears in the pre-2019 STC2000 cars ran
(2019 and later STC2000 cars run a 2-litre Turbo engine manufactured by Oreca so data for that engine isn't helpful in this case)
And before anyone brings up this press release flyer, the chart only rates outputs from 5000 RPM and above, and even then the chart doesn't mark out the specific power and torque outputs for each 100 RPM meaning the ratings will be vague unless I try to know the exact pixel measurements for each 10th of a horsepower.
- 460
- Austria
- 172
- England
- aceferrarifan1
The Alfa 4C and Subaru BRZ have already been converted:
https://mega.nz/file/wQ8wyaaZ#Om1DXuuKr-58URBOSL4dlxus06M6qm1B4T25v0kRPWU - Alfa 4C
https://mega.nz/file/EM8zEQDa#v2kUpk6HEmPiuvxl234b0CZbP8LhuKM0uYXs-sNxDHI - Subaru BRZ
- 781
- United States
- 172
- England
- aceferrarifan1
- 951
- Virgin Islands US
Vector W8 Twin Turbo Rework by Dragster666
Reworked by Dragster666
-Added AO inside out
-Fixed inaccurate performance
-Added Turbo Boost system from the real car aka Kers in this game.
-Added pop up headlights with an headlight mesh which may be inaccurate the real car but it does the job pretty good...
-Added proper Lods (Better done Lods than on my previous cars)
-Removed the inaccurate V12 sound to a more fitting V8 sound
-Rain ready windows,Working wipers ect....
-Gauges done from scratch including digital tachometers
-Removed shifting animation cause the real car is an auto and sadly that shifter isn't modeled
and the whole interior is sadly incorrectly modeled....
-Fixed Driver
-Added reverse light
-New CSP colors Gun Metal and Chameleon this also affects the normal colors and makes them look better....
-CSP shaders for the rims too!
-Added a headlight cover function its if you want the pop ups to go down without turning on the headlights just
press the Extra Option D binding if you can't activate it go into settings then go into controls then into Patch
then bind the Extra Option D function to your button and then activate it in game!!!
Also Note!!! when you want to activate the headlights if you have this on press Extra Option D button to turn
it off then activate the headlights. Do this because the Extra Option D cover animation conflicts with the headlight animation
so turn the covers off first!!!!
-Added a new experimental 6.0 L Rodeck twin-turbocharged V8 engine sound via FMOD.
(Keep in mind that its still experimental because its my first sound mod ever.) I also took the sounds from these videos both from the outside and in the interior.
Outside:
Interior
If you dislike it you can replace it with a another V8 or swap back in
the Countach V12....
Credits:
1ST Racing Studio (Converter) Assettoland (Update) Dragster666 (Rework)
Sadly recently Gerald Wiegert passed away thank you Wiegert for these crazy car designs that were pretty much unthinkable at the time having a car to look more crazy than the famous Countach wasn't a easy task and i congratulate you on that.
Reworked by Dragster666
-Added AO inside out
-Fixed inaccurate performance
-Added Turbo Boost system from the real car aka Kers in this game.
-Added pop up headlights with an headlight mesh which may be inaccurate the real car but it does the job pretty good...
-Added proper Lods (Better done Lods than on my previous cars)
-Removed the inaccurate V12 sound to a more fitting V8 sound
-Rain ready windows,Working wipers ect....
-Gauges done from scratch including digital tachometers
-Removed shifting animation cause the real car is an auto and sadly that shifter isn't modeled
and the whole interior is sadly incorrectly modeled....
-Fixed Driver
-Added reverse light
-New CSP colors Gun Metal and Chameleon this also affects the normal colors and makes them look better....
-CSP shaders for the rims too!
-Added a headlight cover function its if you want the pop ups to go down without turning on the headlights just
press the Extra Option D binding if you can't activate it go into settings then go into controls then into Patch
then bind the Extra Option D function to your button and then activate it in game!!!
Also Note!!! when you want to activate the headlights if you have this on press Extra Option D button to turn
it off then activate the headlights. Do this because the Extra Option D cover animation conflicts with the headlight animation
so turn the covers off first!!!!
-Added a new experimental 6.0 L Rodeck twin-turbocharged V8 engine sound via FMOD.
(Keep in mind that its still experimental because its my first sound mod ever.) I also took the sounds from these videos both from the outside and in the interior.
Outside:
Interior
If you dislike it you can replace it with a another V8 or swap back in
the Countach V12....
Credits:
1ST Racing Studio (Converter) Assettoland (Update) Dragster666 (Rework)
Sadly recently Gerald Wiegert passed away thank you Wiegert for these crazy car designs that were pretty much unthinkable at the time having a car to look more crazy than the famous Countach wasn't a easy task and i congratulate you on that.
Last edited:
- 160
- United Kingdom
I'm not a modder, but had an idea. I've been away for a little while, and have gotten back into AC, and there seems to be weather. Now every single track here, has someone post a camera file (thx Dabaeda and Safi), and rainfx file, and other small config files to adjust things about which I have no clue. But there are thousands of them, despite them being tiny files.
Is it worth somebody keeping like a library of these files, whenever they are updated, so that the Content Manager can refer to this file and update this information automatically, or at the very least, we just unzip the lot, delete the tracks we don't use, and copy the small files over in a batch? I'm thinking also things like ui files - I spend ages painstakingly correcting the series related to tracks, or countries etcetc, and with update after update, it takes crazy amounts of time. Maybe everyone could agree to a standardised format, for things like 'FIA GT' tags, and then we all build a colossal library. I can't be the only person who looks at the tag lists on some tracks and deletes 90% of them because otherwise you end up with 5000 tags that are utterly useless.
I'd be surprised if it were more than 100mb. I'm talking about just the notepad files. Just an idea from a non-modder
Is it worth somebody keeping like a library of these files, whenever they are updated, so that the Content Manager can refer to this file and update this information automatically, or at the very least, we just unzip the lot, delete the tracks we don't use, and copy the small files over in a batch? I'm thinking also things like ui files - I spend ages painstakingly correcting the series related to tracks, or countries etcetc, and with update after update, it takes crazy amounts of time. Maybe everyone could agree to a standardised format, for things like 'FIA GT' tags, and then we all build a colossal library. I can't be the only person who looks at the tag lists on some tracks and deletes 90% of them because otherwise you end up with 5000 tags that are utterly useless.
I'd be surprised if it were more than 100mb. I'm talking about just the notepad files. Just an idea from a non-modder
- 2,211
- Helsinki
Initial D. Street Stage - Akina Downhill (Winter touge) v0.70 w.i.p
- features the most realistic packed snow driving experience in AC*
- working corner mirrors
- a few lights
- AI/Cams broken for this release (halp!)
- needs a few trees (halp! halp!)
- just for fun
:: download ::
*simulates a 2cm fluff on hard-pack snow with "Nokian Hakkapeliitta 8" studded tires
- features the most realistic packed snow driving experience in AC*
- working corner mirrors
- a few lights
- AI/Cams broken for this release (halp!)
- needs a few trees (halp! halp!)
- just for fun
:: download ::
*simulates a 2cm fluff on hard-pack snow with "Nokian Hakkapeliitta 8" studded tires
Last edited:
- 1,011
- UK
- the_greeze
Similar threads
