Assetto Corsa PC Mods General DiscussionPC

[1ChazDM1]

What software are the livery creators using????

 

[sickopaul]

What software are the livery creators using????

photoshop, gimp, if you want 3d painting (a bit complicated) you can use mudbox or photoshop still

remember you need a plugin for .dds files

 

[gergerger]

You can actually add all these lines to you extension and set the mix however you like amongst all these elements:

[AUDIO_VOLUME]
ENGINE_EXT = 1.0
ENGINE_INT = 1.0
GEAR_EXT = 1.0
GEAR_INT = 1.0
BODYWORK = 0.1
WIND = 1.0
DIRT = 1.0
DOWN_SHIFT = 1.0
UP_SHIFT = 1.0
HORN = 1.0
GEAR_GRIND = 1.0
BACKFIRE_EXT = 1.0
BACKFIRE_INT = 1.0
TRACTION_CONTROL_EXT = 1.0
TRACTION_CONTROL_INT = 1.0
TRANSMISSION = 1.0
LIMITER = 0.1
TURBO = 1.0
RAIN_EXT=1.0
RAIN_INT=0.8
WIPER_EXT=0.8
WIPER_INT=0.6

Awesome!
Is there a way to increase the kerb sound on individual track's extension file?
(unnecesary explanation): I'm using that awesome sfx available on RD, but I'm practically not hearing the kerbs. Creator of the mod says he didn't change the kerbs volume, so it's possibly related to my sound hardware low sounds, whatever they're called.

 

[KevinK2]

Realize... AI lines are, 1 lap.

Uh okay.

You gotta do two to make one.

 

[TonySSS]

ripping encrypted tracks and cars is a thing now by the way... once I nut out the blender import script a bit more ill release the process fully.

You mean that you can now finally rip encrypted cars and tracks of AC...?

 

[Kurt Woods]

What software are the livery creators using????

Using Paint.net to open and save the .dds files, while doing all the graphics in Paint shop Pro, for myself anyway.

 

[1ChazDM1]

photoshop, gimp, if you want 3d painting (a bit complicated) you can use mudbox or photoshop still

remember you need a plugin for .dds files

awsome i'll give them a try

Using Paint.net to open and save the .dds files, while doing all the graphics in Paint shop Pro, for myself anyway.

I'll try that thanks

 

[TheRealCeeBee]

You mean that you can now finally rip encrypted cars and tracks of AC...?

close(r)

 

[Cozy61]

Update 28/04/2021:
Turkey replaces Canada - Race Week 8

All 3 versions of Championship updated
RD link: https://www.racedepartment.com/downloads/rss-fh-2021-f1-2021-full-season-‘custom-championship.41138/

• 2021 F1 (RSSFH21) Season
• 2021 F1 (RSSFH21) SON Season
• 2021 F1 (RSSFH21) Engine Season

 

[Big Z]

Why is the video quality so horrendous?
Did you film your monitor screen there?
That looks worse than a TV series from the 60s [/QUOTE]

J3FFMASTER -What i have at this moment i work with that.Thank you for your opinion but you must know, the if you cant help somone to become bether, then you should judge .Money cant buy talent Master ,and if you dont like my videos you can watch somone with bether quality .
Still i didnt see your work !
Anyone who want to make videos for you tube and dont have money to buy expensive pc equipment ,its possible ,you just work hard and always you have all my support .Stay safe and helath all !

 

[ZombieBoy1978]

Why is the video quality so horrendous?
Did you film your monitor screen there?
That looks worse than a TV series from the 60s

J3FFMASTER -What i have at this moment i work with that.Thank you for your opinion but you must know, the if you cant help somone to become bether, then you should judge .Money cant buy talent Master ,and if you dont like my videos you can watch somone with bether quality .
Still i didnt see your work !
Anyone who want to make videos for you tube and dont have money to buy expensive pc equipment ,its possible ,you just work hard and always you have all my support .Stay safe and helath all ![/QUOTE]

Do you use Windows 10? It has built-in recording software. Just hold down the Alt + Windows key and press R to begin recording and then do the same again to stop recording. That will generate a video into your Videos folder which you can upload to YouTube.
That's how I record all of my videos.

 

[xezez]

Awesome!
Is there a way to increase the kerb sound on individual track's extension file?
(unnecesary explanation): I'm using that awesome sfx available on RD, but I'm practically not hearing the kerbs. Creator of the mod says he didn't change the kerbs volume, so it's possibly related to my sound hardware low sounds, whatever they're called.

To my knowledge, there's no independent control for just kerb volume alone. I figure its just part of the overall 'surfaces' level. I set that and tyres/opponent volume in the built-in AC sound level controller, then balance everything else to that.

The range of controllable audio parameters was updated again back in December though, so there are now all these:

[AUDIO_VOLUME]
ENGINE_EXT = 1.2
ENGINE_INT = 1.2
GEAR_EXT = 1.0
GEAR_INT = 1.0
BODYWORK = 0.1
WIND = 1.0
DIRT = 1.0
DOWN_SHIFT = 1.0
UP_SHIFT = 1.0
HORN = 1.0
GEAR_GRIND = 1.0
BACKFIRE_EXT = 1.0
BACKFIRE_INT = 1.0
TRACTION_CONTROL_EXT = 1.0
TRACTION_CONTROL_INT = 1.0
TRANSMISSION = 1.0
LIMITER = 0.1
TURBO = 1.0
RAIN_EXT=1.0
RAIN_INT=0.8
WIPER_EXT=0.8
WIPER_INT=0.6

[AUDIO_PARAMETER_TRANSFORM]
ENGINE_EXT_RPMS = (| 0=0 | 10000=10000 |) ; change the second 10000 number to 6500 for the same sounds with low tones.
ENGINE_INT_RPMS = (| 0=0 | 10000=10000 |)

[AUDIO_PITCH]
BACKFIRE_EXT=1
BACKFIRE_INT=1
BODYWORK=1
DIRT=1
DOWN_SHIFT=1
ENGINE_EXT=1
ENGINE_INT=1.1
GEAR_EXT=1
GEAR_GRIND=1
GEAR_INT=1
HIT=1
HORN=1
LIMITER=1
SCRAPE=1
SKID_EXT=1
SKID_INT=1
TRACTION_CONTROL_EXT=1
TRACTION_CONTROL_INT=1
TRANSMISSION=1
TURBO=1
WHEEL=1
WIND=1

[AUDIO_PROPERTIES]
ENGINE_EXT_BOOST=0
ENGINE_INT_BOOST=0
TURBO_THROTTLE=0

 

[Fanapryde]

Meantime, Legion is doing it again.

View attachment 1007360
https://perendinator.blogspot.com/?...BobsEpyIJXoGYrDxAEdXeEK0-jjR7R-Uby6YIh-JfuIAk

Thank you.

That is a fun car to drive.
But is it only on my side that the idle revs stay at about 4500 rpm ?
@GzeroD

 

[__EASY__]

ACTK Pau Arnos v2.2: http://www.assetto-fr.tk/AC-Forum/viewtopic.php?f=23&t=1083

 

[Paulo Ribeiro]

That is a fun car to drive.
But is it only on my side that the idle revs stay at about 4500 rpm ?
@GzeroD

On my side the idle revs seems to be right.

 

[Fanapryde]

On my side the idle revs seems to be right.

Strange, I’ll redownload tomorrow. Tried the car on different tracks but the idle was always way too high, as if my accelerator got stuck. Doesn’t happen with other cars, I even recalibrated my pedal...

 

[GzeroD]

That is a fun car to drive.
But is it only on my side that the idle revs stay at about 4500 rpm ?
@GzeroD

That'll be the engine braking adjustability, it works by having minimum throttle some percentage above zero.
Still strange that it does that for you, but try adding one or two clicks to Engine Brake in setup.

 

[Big Z]

J3FFMASTER -What i have at this moment i work with that.Thank you for your opinion but you must know, the if you cant help somone to become bether, then you should judge .Money cant buy talent Master ,and if you dont like my videos you can watch somone with bether quality .
Still i didnt see your work !
Anyone who want to make videos for you tube and dont have money to buy expensive pc equipment ,its possible ,you just work hard and always you have all my support .Stay safe and helath all !

Do you use Windows 10? It has built-in recording software. Just hold down the Windows key and press R to begin recording and then do the same again to stop recording. That will generate a video into your Videos folder which you can upload to YouTube.
That's how I record all of my videos.[/QUOTE]

Thank you for advice ,stay safe !

 

[xezez]

That is a fun car to drive.
But is it only on my side that the idle revs stay at about 4500 rpm ?
@GzeroD

#MeToo.

 

[racealot]

Hey there, just to let @gutbomb know, the link to the L and M pages of your reviews is not the right one, it's page 1474 and the right one is page 1475.

Also there is a Bremgarten version done by the Reboot team, if you are interested.

Cheers

Came up with this issue a while back, so best to retain a bookmark of the post-link URL (Report #) instead of the general page URL - this tends to occur when previous posts are culled - hence the decreased 'page-number' of the original post...

example:
your post of 27Apr2021 may not necessarily be on page #2422 a year from now, or less...

 

[gutbomb]

Came up with this issue a while back, so best to retain a bookmark of the post-link URL (Report #) instead of the general page URL - this tends to occur when previous posts are culled - hence the decreased 'page-number' of the original post...

example:
your post of 27Apr2021 may not necessarily be on page #2422 a year from now, or less...

View attachment 1007462

That actually is where I derive those post links from, but it's still dependent on being on the correct page number, so when enough posts got added or deleted or something (have no idea how it shifted forward a page to be honest, maybe a very old thread got merged in here or something) the old link didn't work.

here's the link you get from there for your post:
https://www.gtplanet.net/forum/thre...ral-discussion.307899/page-2426#post-13400703.

It's still got the page number in there, and if you change the page number in that link it won't find the post.

 

[racealot]

That actually is where I derive those post links from, but it's still dependent on being on the correct page number, so when enough posts got added or deleted or something (have no idea how it shifted forward a page to be honest, maybe a very old thread got merged in here or something) the old link didn't work.

here's the link you get from there for your post:
https://www.gtplanet.net/forum/thre...ral-discussion.307899/page-2426#post-13400703.

It's still got the page number in there, and if you change the page number in that link it won't find the post.

That's also correct... Then GTP Admin may need to review/improve their link-url-properties, so when 'saved', the post-number becomes the true 'target', and not bound to the page-number (moving 'target')... If that all makes sense... You'd perhaps know better in that field of day2day expertise...

 

[maruto]

Do you use Windows 10? It has built-in recording software. Just hold down the Windows key and press R to begin recording and then do the same again to stop recording. That will generate a video into your Videos folder which you can upload to YouTube.
That's how I record all of my videos.

didn't work for me so i checked it up: and simply adding Windows key + ALT +R it works.
really useful advice thanks a lot.

 

[Zekkai]

You mean that you can now finally rip encrypted cars and tracks of AC...?

Shooting yourself and all of the community 👎👎 you're just driving the good modders to really never release again(the very few ones who still does)

 

[ZombieBoy1978]

didn't work for me so i checked it up: and simply adding Windows key + ALT +R it works.
really useful advice thanks a lot.

No worries. I haven't done it for a short while, so forgot about the alt key.
Just a tip though. Hold down Windows and Alt, and then simply press R to begin. You can be a lot more accurate with the start of the recording this way. I find that trying to press all three keys simultaneously at the exact time that you want to begin recording can feel a little unwieldy.

 

[Balwerk]

You mean that you can now finally rip encrypted cars and tracks of AC...?

I wonder if this good idea. Bring more problem for sure.

 

[UolterUait]

Delete

 

[StoffelWaffle]

Can't wait for it so there won't be any public release anymore for good...

Oh bummer. Booh. Maybe those expert modders will finally make their own, scratch made mods instead of encrypting the property of another company ?

 

[UolterUait]

Delete

 

[StoffelWaffle]

It's still a loss?
Do you only use scratch made mods?

Nah. But seeing some of these modders act all high and mighty with their encrypted Forza / GT / PC rips... Yeah. Maybe that'd be a good thing. 'I'm encrypting my totally-not-from-another-game-model so people can't mess with it', he said having messed with an already encrypted Forza / GT / PC model.

The irony. That and the Geroda dude selling his Forza / PC2 rips on Patreon and passing these off as his.

Love it.