- 154
- Spain
Assetto Corsa PC Mods General DiscussionPC
- Thread starter daan
- 139,169 comments
- 38,248,719 views
- 158
- Germany
Great job! Just a small thing, the distance boards for the chicane on the straight seem to be a bit too far forward (as in too close to the turn), and turn 1 doesn't feel quite right to me. Other than that, very well done.
- 126
- Spain
I run with 32 cars without any problem,
and for the performance of the lod it is more the number of triangle in less which plays on the performance and not the number of objects.
apparently you seem to know how to do better, send me your LOD
Your assessment is wrong, i guess you never tested many lods, but i did it.
An example with 24 cars:
Car 1, with 1,3 millions of triangles and 4,3k the objects in total, it has a bad performance.
Car 2, with 10,4 millions of triangles and 1,3k the objects in total, it has a good performance.
And of course, i know make lods, its very easy, but in this case, the car is awful, i deleted it because the interior is so ugly, but no problem, tell me a good car without lods and i could make it.
- 327
- France
Thank a lot, really a great work, been waiting for a version like this one!
Really appreciate
Got a lot of fun on it with the Formula RSS 3 V6
Thanks for this release. Do you think the other layouts will be released in time or is it finished?
- 288
- United Kingdom
Thank you for the release.
One other question. What setting in AC makes the road markings become visible from further away. My settings make them come into view right in front of the car. It is very apparent in this release due to the dark pavement.
- 327
- France
Just an optional skin for the new Paul Ricard track, thanks again to marc and blackcelica, this skin modify only the vegetation.
- 1,937
- United States
- RaceManiacGT1
Ditto, really looking forward to it. Having been there just as a passenger visiting CA during a track day there the 5 mile layout is amazing...
- 215
- Cleveland, Ohio, USA
Hi all,
Here's a quick and dirty pair of DRS Zones for Paul Ricard 2021 by Marc_13000
https://www.mediafire.com/file/lzcjxa12jfi0pw6/paul_ricard_2021_-_DRS_zones.rar/file
Note: The back straight DRS zone signs are not in the correct place. According to what I watched this morning that zone starts right at the end of the kerbing. I have it starting at the end of the strip in line with the P Zero sign which is just about where it should be.
Here's a quick and dirty pair of DRS Zones for Paul Ricard 2021 by Marc_13000
https://www.mediafire.com/file/lzcjxa12jfi0pw6/paul_ricard_2021_-_DRS_zones.rar/file
Note: The back straight DRS zone signs are not in the correct place. According to what I watched this morning that zone starts right at the end of the kerbing. I have it starting at the end of the strip in line with the P Zero sign which is just about where it should be.
- 5,556
- Belgium
I have no starting lights (digital flags seem to work) and no track lights either. Still to come or not planned ?
- 48
- Canada
It funny as I just did that search a couple days ago after watching Ja
Thanks for the great new version blackcelica and @marc_13000! My F1 season is definitely more fun with all the the great work you put in before each race year after year.
- 1,193
- Australia
- 48
- Canada
Sorry about that...thought I was just quoting on the Paul Ricard. Was gunna send that other message a couple days ago or so, but figured the answer out as I was typing. Thanks for the reply though
- 161
- Aveiro
- 1,193
- Australia
closer and closer...
Last edited:
- 166
- Cassis
sorry not planned, im completly newbie on starting lights or tracks lights, i dont know how its work, my knowledge in csp extensions are limited
thanks for your vegation skin very useful
Last edited by a moderator:
- 243
- Kursk
Hi all!
Suddenly, I began to have errors like this:
AC\cameraforward.cpp (430): CameraForward::renderBlurred
AC\cameraforwardyebis.cpp (1261): CameraForwardYebis::renderApplyEffect
AC\cameraforwardyebis.cpp (1182): CameraForwardYebis::render
AC\sim.cpp (2564): Sim::renderScene
AC\game.cpp (275): Game::render
AC\game.cpp (275): Game::render
AC\game.cpp (275): Game::render
AC\game.cpp (126): Game:
nIdle
AC\game.cpp (210): Game::run
AC\acs.cpp (477): wWinMain
f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c (618): __tmainCRTStartup
Any ideas what's broke?
Suddenly, I began to have errors like this:
AC\cameraforward.cpp (430): CameraForward::renderBlurred
AC\cameraforwardyebis.cpp (1261): CameraForwardYebis::renderApplyEffect
AC\cameraforwardyebis.cpp (1182): CameraForwardYebis::render
AC\sim.cpp (2564): Sim::renderScene
AC\game.cpp (275): Game::render
AC\game.cpp (275): Game::render
AC\game.cpp (275): Game::render
AC\game.cpp (126): Game:
nIdleAC\game.cpp (210): Game::run
AC\acs.cpp (477): wWinMain
f:\dd\vctools\crt\crtw32\dllstuff\crtexe.c (618): __tmainCRTStartup
Any ideas what's broke?
Attachments
- 850
- Germany
Forgive me but.. are these vrc's newsest lmp1 additions?
guys, I think I'm going to cry, how beautiful it looks, I did not imagine it could be like this.
I really want to see it finished, but that is still a long way away, there are many things missing, and I don't think I will put so much detail in the rest of the circuit, but this area of the river and the castle had to be like that.
I really want to see it finished, but that is still a long way away, there are many things missing, and I don't think I will put so much detail in the rest of the circuit, but this area of the river and the castle had to be like that.
The top one is the Revenga (Rebellion R13) and the bottom is the Vendetta (Ginetta)
- 850
- Germany
- 45
- United States
- 1,193
- Australia
3dsimed gurus... I have issues bring objects back to game via Blender as it throws away some fbx.ini settings, -BUT- , 3dsimed cannot "split geometry by loose parts", so for tracks where geometry is grouped as grass inside the track and bits and pieces of the same grass outside the track, and then perhaps even parts of far terrain its impossible to split the meshes (as far as i can tell).
Anybody found a way to do this in 3dsimed? (its not split by texture, they all use the same texture)
example i only want to delete the far right piece of geometry, but its grouped with two other pieces, if i use "explode all" i get a trillion triangle faces, impossible to work with..
Anybody found a way to do this in 3dsimed? (its not split by texture, they all use the same texture)
example i only want to delete the far right piece of geometry, but its grouped with two other pieces, if i use "explode all" i get a trillion triangle faces, impossible to work with..
Last edited:
- 287
- California
- ish1tyounot
i can second this and im on 1440p
- 1,202
- Arrakis
Thanks for this Blackcelica. I'm going to swim against the current and admit that, aside from the fact it has ridiculously large runoff areas and is owned by Bernie Ecclestone (😕), I don't mind the circuit at all. Not somewhere I drive regularly, but when I do, I can still enjoy it.
Last edited:
- 226
- Mexico
I think it´s easier to copy the shader settings manually in the persistence file than using 3dsimed for whatever it is you´re trying to do
Similar threads
