Assetto Corsa PC Mods General DiscussionPC

[Vintagedriver]

Hey, what does everybody think about the 3D trees from CSP? I like them especially if a track's 2D trees aren't very good, but I feel like opinions might be mixed.

We already had that discussion here and if being good than it's ok, but same is counting for the perfect 2D trees, or putting the lesser quality 2D stuff further away from the track. Only I'm afraid for an older or low spec rigs it's a step to much, or reading the comments here some prefer an nostalgic 2D view.
Maybe that also explains the power of AC, there is so much different specific genres, feel free to use what you like the most. Even it is riding a banana on tracks with only 3D or 2D trees, why not.

 

[The Vampire]

Which circuit is that please?

Thruxton 1990s by James Skinner

https://www.overtake.gg/downloads/thruxton-1990s.66453/

 

[Pete82]

I'm late in posting here, but once again...

The legendary car is finally back! !
Isdera Commendatore 112i BETA test has started！

Since the car has many unique gimmicks, I also created an engine compartment. Please enjoy the first BETA version!
I have already received a lot of feedback, and I will make it even better in the next update!

The legendary Isdera Commendatore 112i begins BETA testing!! | Danbowlghini Modding Project

Get more from Danbowlghini Modding Project on Patreon

www.patreon.com

View attachment 1346149View attachment 1346150View attachment 1346151View attachment 1346152View attachment 1346153View attachment 1346154View attachment 1346155View attachment 1346156View attachment 1346157

which track is it?

 

[Junshen Wu]

2024 F1 Chinese GP extension for Shanghai_v2 is out now, thanks to dear Pyyer.
Extension:https://www.patreon.com/pyyer
Track:https://mega.nz/file/rgQHFKTb#JxSgkBgB6z-BPsbtYjZIDd05awgLLVr8fHJcFp2vwrc

 

[Greg_ST]

The second team Repsol skin and one of the "OIL skin pack" (coming soon)
yesterday I completely gave up on this skin and today it is done by hand

 

[JV82]

Hello,

Has anyone encountered this issue with SPA track and managed to resolve it? I've reinstalled SPA 2022 (on Kunos track) and the Pyyer configurations, but the problem persists...

View attachment 1348670

Edit : it is the following option from CSP causing the troubles :
View attachment 1348680

Thank you

Pyyer has updated some of his extensions. Have you installed the latest version for Spa?

 

[Fumblefap]

Rubbing wormy wet dog turds into your eyes is a great way to simulate the joy of 3D trees without the inconvenience of turning your PC on.

There are worse ways to spend a weekend, I suppose! XD

I'm honestly surprised to see that the majority opinion is generally negative! I think 3D trees look pretty good, especially for trees that are close to the race track and for certain types of trees (2D palms always look so bad).

Here's another thing I've been trying out. Has anybody been using AI upscaling for logos you can't get in a high enough resolution? I've been using this website to do it, although I wouldn't be surprised if it's built into the Adobe suite somewhere at this point. It's not perfect, but the results are nevertheless quite impressive:

Spoiler

 

[shi]

Dunas 1981 v1.01

Dunas 1981 | shin956

Get more from shin956 on Patreon

www.patreon.com

View attachment 1337319
Fictional circuit.
Conversion from RACE07.

-CSP recommended
-25 pit/start
-AI, cam

Note;
Trees were not included in the original track.
If you want to restore the original look,
delete the dunas_1981_tree.kn5 entry from models.ini.

Credits & Thanks;
Original rFactor Track by entrevias
-Thanks for creating this track and making it freeware.
RACE07 Converted by Sergio Hundo
-Thank you for giving me permission

AC Converted by @shi (shin956)
fast_lane.ai, sidelines, drs_zones.ini by formulaHEINE
ai_hints.ini by IMEAN
logo.png by @Fanapryde
.lua and font base by @gunnar333
Crowds texture by @Kniker97
trees, marshall, cameraman and some textures by kunos
Test and Feedback by @Masscot , @Fanapryde

Download (mediafire)

Enjoy.

v1.01 changelog;

-New fast_lane.ai, sidelines, drs_zones.ini by formulaHEINE. (Thanks!)
-ai_hints.ini by IMEAN. (Thanks!)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

Wellington 500 v1.2

Assetto Corsa PC Mods General Discussion

Quick fix: Unpack data using Content Manager Open drivetrain.ini file in the data folder Change line 63 to DOWN=3700 (from DOWN=4700) Save file Pack data Works like a charm! Thank you!

www.gtplanet.net

v1.2 changelog;
Updated fast_lane.ai and sidelines.
Deleted ai_hints.ini.
Fixed holes in the road surface. (Thanks Josuracer for the report.)

Dunas 1981 v1.01
The link is in the quote.

v1.01 changelog;
-New fast_lane.ai, sidelines, drs_zones.ini by formulaHEINE. (Thanks!)
-ai_hints.ini by IMEAN. (Thanks!)

 

[BruceD]

that's because KSeditor thinks he knows best and will force the texture associated to the material the object had based on what's written in the .ini file. So you need to locate the part in the ini file associated to your object/material, and remove that part from the ini

It is very irritating when things like that happens, out of rage I just delete the entire ini and redo everything from kseditor for all materials sometime

I see my actual problem is when I export to FBX that particular material is not registering in the FBX file. So KSeditor is randomly assigning it its own material. So I can't see how to assign a material to the object in the config file, only the existing materials. Very annoying.

 

[Hazerion17]

The tyre textures for my SF15-T turned shiny all of a sudden. Any reason why this is and how I can fix this? (using TyreFX)

 

[Juppek]

Whenever I do a race, the cars that go off and out are rejoining from the pits, despite the box isn't marked in New ai behaviour... Maybe because of CSP version?
How do I fix it?

 

[FeGabriel]

View attachment 1348732
The tyre textures for my SF15-T turned shiny all of a sudden. Any reason why this is and how I can fix this? (using TyreFX)

"We are going for plan G. Plan G"

 

[Masscot]

There are worse ways to spend a weekend, I suppose! XD

I'm honestly surprised to see that the majority opinion is generally negative! I think 3D trees look pretty good, especially for trees that are close to the race track and for certain types of trees (2D palms always look so bad).

Maybe it's a VR issue or something, but nine times out of ten 3D trees look like cel-shaded houseplants, or giant cabbages. The lighting/saturation/contrast is often overblown and doesn't fit the rest of the environment at all.
TLDR: wormy turds.

 

[Rodger Davies]

Whenever I do a race, the cars that go off and out are rejoining from the pits, despite the box isn't marked in New ai behaviour... Maybe because of CSP version?
How do I fix it?

I have this too, it's really irritating - cars that should be put coming out of the pits right in front of the lead battle.

Thruxton 1990s by James Skinner

https://www.overtake.gg/downloads/thruxton-1990s.66453/

Thanks, didn't recognise without the 70s skin!

 

[Young78]

Ferrari 308 GTB Group 4(v1.0) by F40 LM Lover & VerdesGarage

It is Required CSP 2.3 Preview1 or over.

1. 3d Model
1) Base model from Gran Turismo 7
2) Many parts are made by myself.

2. Sound by hillclimber12

3. Extra Function Keys
- EXTRA A : Left Door Open/Close
- EXTRA B : Right Door Open/Close
- EXTRA C : Motor Hood Open/Close
- EXTRA D : Engine Start/Stop
- EXTRA E : Extra Fog Lights On/Off
- EXTRA F : Fog Lights On/Off

4. Visual Options in set-up
- Extra Fog Lights can be disabled/enabled
- Co-Driver can be disabled/enabled
- Mud Flaps can be disabled/Enabled
- Tyre Shapes and textures can be changed(Tarmac/Gravel/Snow) with Certain physics.

5. Physics by VerdesGarage who is one of the best rally car modder
- Two types of Engine MAP(Standard/QV), You can set it up in Fuel tab of Set-Up
- He made three setups(Tarmac/Gravel/Snow), "Look in the description of the car in CM and you will see the links,
copy-paste in google to install"
. Gravel Setup : https://acstuff.ru/s/QCYmAk
. Snow Setup : https://acstuff.ru/s/WPuMMm
. Tarmac Setup : https://acstuff.ru/s/KnfKLh

6. Tyres textures and CO-Driver's Pace Note mesh by VerdesGarage & iku

7. Rally Driver by Frito (ZFLB)

 

[MasterFocus]

Maybe it's a VR issue or something, but nine times out of ten 3D trees look like cel-shaded houseplants, or giant cabbages. The lighting/saturation/contrast is often overblown and doesn't fit the rest of the environment at all.
TLDR: wormy turds.

Single screen here and dont like 3d trees either as their are morphing all the time!!

 

[Juppek]

I have this too, it's really irritating - cars that should be put coming out of the pits right in front of the lead battle.

Hmmm, at least I'm not the only having this issue... A bit better than being alone with a problem

 

[Gregz0r]

Hmmm, at least I'm not the only having this issue... A bit better than being alone with a problem

This problem has been around for about 4-5 weeks now.

Assetto Corsa PC Mods General Discussion

is that what you want? https://www.lm24database.org/home.html omg this is amazing

www.gtplanet.net

 

[Masscot]

Single screen here and dont like 3d trees either as their are morphing all the time!!

Oh yeah, I totally forgot about the terribad lod switching. It's like entirely different cabbages are being teleported in from some orbiting vegetable patch.

 

[Fanapryde]

Maybe it's a VR issue or something, but nine times out of ten 3D trees look like cel-shaded houseplants, or giant cabbages. The lighting/saturation/contrast is often overblown and doesn't fit the rest of the environment at all.
TLDR: wormy turds.

It’s not only VR, I can assure you.
3D trees are in 99% of the cases horrible looking on triples too.
I do have a couple of tracks where the modder did a really good job in choosing the right kind of trees, fitting the real environment, using the right shaders, no popping, still looking OK in stronger winds and in wet night conditions, and all that without affecting FPS too much. But it is very rare…

 

[Juppek]

This problem has been around for about 4-5 weeks now.

Assetto Corsa PC Mods General Discussion

is that what you want? https://www.lm24database.org/home.html omg this is amazing

www.gtplanet.net

That's definitely on the CSP version, only happens since I use v0.2.2...

 

[MrHunt]

Ferrari 308 GTB Group 4(v1.0) by F40 LM Lover & VerdesGarage

It is Required CSP 2.3 Preview1 or over.

1. 3d Model
1) Base model from Gran Turismo 7
2) Many parts are made by myself.

2. Sound by hillclimber12

3. Extra Function Keys
- EXTRA A : Left Door Open/Close
- EXTRA B : Right Door Open/Close
- EXTRA C : Motor Hood Open/Close
- EXTRA D : Engine Start/Stop
- EXTRA E : Extra Fog Lights On/Off
- EXTRA F : Fog Lights On/Off

4. Visual Options in set-up
- Extra Fog Lights can be disabled/enabled
- Co-Driver can be disabled/enabled
- Mud Flaps can be disabled/Enabled
- Tyre Shapes and textures can be changed(Tarmac/Gravel/Snow) with Certain physics.

5. Physics by VerdesGarage who is one of the best rally car modder
- Two types of Engine MAP(Standard/QV), You can set it up in Fuel tab of Set-Up
- He made three setups(Tarmac/Gravel/Snow), "Look in the description of the car in CM and you will see the links,
copy-paste in google to install"
. Gravel Setup : https://acstuff.ru/s/QCYmAk
. Snow Setup : https://acstuff.ru/s/WPuMMm
. Tarmac Setup : https://acstuff.ru/s/KnfKLh

6. Tyres textures and CO-Driver's Pace Note mesh by VerdesGarage & iku

7. Rally Driver by Frito (ZFLB)

I love you man, thank you so much!

View attachment 1348463View attachment 1348464View attachment 1348465

What specific model is this? I mean its an Opel Kadett E, no question i grewed up with this car, but what spec?

https://historicdb.fia.com/sites/default/files/car_attachment/1601055001/homologation_form_number_5369_group_a.pdf

A Opel Kadett E 4S (1986) ? http://tech-racingcars.wikidot.com/opel-kadett-e-4s

 

[Vintagedriver]

It’s not only VR, I can assure you.
3D trees are in 99% of the cases horrible looking on triples too.
I do have a couple of tracks where the modder did a really good job in choosing the right kind of trees, fitting the real environment, using the right shaders, no popping, still looking OK in stronger winds and in wet night conditions, and all that without affecting FPS too much. But it is very rare…

Was driving today my custom 1950 F1 championship, on a track with only 2D trees and what I do like, put away those cardboard trees from the track, but hell in my VR headset, these trees were shimmering like Vegas neon light.
In my country we say, it doesn't matter bitten by the dog or the cat, both do hurt you.
Just get what you prefer on you system and take the best from the worst.

 

[JK1977]

What specific model is this? I mean its an Opel Kadett E, no question i grewed up with this car, but what spec?

https://historicdb.fia.com/sites/default/files/car_attachment/1601055001/homologation_form_number_5369_group_a.pdf

A Opel Kadett E 4S (1986) ? http://tech-racingcars.wikidot.com/opel-kadett-e-4s

Opel Kadett E 4S

 

[kakauiyt]

I see my actual problem is when I export to FBX that particular material is not registering in the FBX file. So KSeditor is randomly assigning it its own material. So I can't see how to assign a material to the object in the config file, only the existing materials. Very annoying.

I think you're better off deleting the whole ini file

 

[jac0]

what I did with my Sunday :

download

cheers all and have a good week!

 

[marc magnela]

yep some problems with Medifire i upload with Mega

108.72 MB file on MEGA

mega.nz

Ferrari 308 GTB Group 4(v1.0) by F40 LM Lover & VerdesGarage

more than 2.6 million polygons? that's still not enough to try 4 or 6 million, but give me an intel i9 and a 4090 to run all that.

 

[mr2it3881]

It's the first time I've seen it in a very long time.

yeah its like certain days CM just says Fu$% you! lol

"We are going for plan G. Plan G"

We are checking.

 

[BloodyThunderX]

So I recently moved my AC installation to a brand new SSD and lost some of my old settings.
I was able to restore most of them... albeit with one caveat that's actually served to be rather irritating so far.

The rear camera (look behind) placement is suddenly far higher than it used to be.
View attachment 1345536

I use the "BACC - Forza Horizon" Chaser Camera script from RaceDepartment (Overtake) and had been using it prior to the game being moved, and never had this problem before. For context, this is how I have it currently set up when looking in front from third person.

View attachment 1345537

Anyone know how I can fix this? This is present on every vehicle and is not related to the mod shown here.

I apologize to keep bumping this, but I've been desperately trying to figure out why this has been happening, my installation has never properly been the same since moving the game and re-verifying everything.

Been trying to ask around and I haven't been getting any response. Its something that badly sets off my OCD.

Happens to any vehicle, including Kunos cars.

Despite my best efforts, I just can't seem to find the fix for it.

 

[jac0]

fyi (just a spot, not mine) a new fictional track just released :

seems to be a real vr-legs tester...