Assetto Corsa PC Mods General DiscussionPC 

  • Thread starter daan
  • 138,871 comments
  • 38,045,853 views
1731931240075.png


1731931258130.png


Soon, a whole new 2008 mod, properly made
 
First thing you should look is your overscan settings for the TV in your graphics driver and if you use the full resolution on your TV for the selected input.
Will need to take a look at these, as I don’t think I have yet. However, the two things that confuse me about this, is for Panel #2 (the monitor), I’ve had this used as a panel since I got the computer (with a larger monitor - not a TV - originally set as Panel#1), and also that the only program that seems to be affected by this issue, is Content Manager. All other games work fine. Internet browsers work fine. Office applications work fine, etc. Just Content Manager. Will see if I can take screen grabs next time I’m sitting at it
Perhaps take a look at the Windows Display Scaling settings for each panel?
I have taken a look at the basic “display” settings in Windows, and it’s all set to “recommended”. Have also been having another issue with overheating since connecting the TV as a panel, so assume it’s related to this (have tried power settings being set to low, except when gaming. Interestingly it doesn’t overheat while gaming.. yet)
 
@kakauiyt question, all these "reworked" mods suddenly appeared from race project, are you somehow involved in these as well? Speaking about the 2013 in particular, I am not sure which one is the most accurate one or did they just stole someone´s work for profit?
 
993 GT2 is one of the most expensive Porsches in the market. One was just sold for 2.4 million dollars. LOL. As you know me I race F1 cars 99% of the time but we have a few GT2's on AC.

When I was a kid in the 90's the poster of this car was on my wall. I can never afford any kind of 993 as they're so expensive now but I can drive it on AC. What is the best 993 GT2 version on AC, in your opinion?

Xc0IMNN.jpg


afmebji.jpg


Xc0IMNN.jpg


BMEPOtJ.jpg
 
993 GT2 is one of the most expensive Porsches in the market. One was just sold for 2.4 million dollars. LOL. As you know me I race F1 cars 99% of the time but we have a few GT2's on AC.

When I was a kid in the 90's the poster of this car was on my wall. I can never afford any kind of 993 as they're so expensive now but I can drive it on AC. What is the best 993 GT2 version on AC, in your opinion?

Xc0IMNN.jpg


afmebji.jpg


Xc0IMNN.jpg


BMEPOtJ.jpg
I don't seem to have a GT2 but this one by Esprit3905 is one of my go-to 993 911s

1731939468063.png
 
@kakauiyt question, all these "reworked" mods suddenly appeared from race project, are you somehow involved in these as well? Speaking about the 2013 in particular, I am not sure which one is the most accurate one or did they just stole someone´s work for profit?
I'm not involved at all with the race project work. The only participation I did was fixing some faults of his BMW Sauber 2008 (3D wise).

The 2013 rework he has done apparently is based on formula opponent 2013. For the rest I don't know, I'm already busy with my own projects to look at what others do
 
I have completed the dashboard and the last remaining unfinished details. Now it's time for physics, hoping to find useful information. :D

PS: liveries are not finished.
 

Attachments

  • preview.jpg
    preview.jpg
    55.9 KB · Views: 1
  • preview.jpg
    preview.jpg
    49.1 KB · Views: 1
  • preview.jpg
    preview.jpg
    63.5 KB · Views: 1
  • preview.jpg
    preview.jpg
    45.9 KB · Views: 1
  • Screenshot_bem_ferrari_f430_gt2_imola_1998_18-10-124-20-11-3.jpg
    Screenshot_bem_ferrari_f430_gt2_imola_1998_18-10-124-20-11-3.jpg
    103.2 KB · Views: 1
suggest for flipping issue:
1. try swapping out tires (not just tires.ini but all associated files) from a car that does not exhibit this behavior
2. do the same with inertia values in car.ini

Thanks.

Could you be more specific.

What asscoiated files in the data folder?

You mean slickshard_front.lut, etc?

Edit: Changing the inertia really seems to do the trick. I copied ASR 1992 inertia values and that really helped. You are the first one with proper advice. I asked about this many times but no one else suggested this.
 
Last edited:
Last edited:
Will need to take a look at these, as I don’t think I have yet. However, the two things that confuse me about this, is for Panel #2 (the monitor), I’ve had this used as a panel since I got the computer (with a larger monitor - not a TV - originally set as Panel#1), and also that the only program that seems to be affected by this issue, is Content Manager. All other games work fine. Internet browsers work fine. Office applications work fine, etc. Just Content Manager. Will see if I can take screen grabs next time I’m sitting at it

I have taken a look at the basic “display” settings in Windows, and it’s all set to “recommended”. Have also been having another issue with overheating since connecting the TV as a panel, so assume it’s related to this (have tried power settings being set to low, except when gaming. Interestingly it doesn’t overheat while gaming.. yet)
I can confirm it has something to do with TV being connected as a display. I've just unplugged the HDMI cable from the back of the TV (so that it's only running of my monitor), and has fixed the overscan of Content Manager on that, and has also stopped powering off/overheating my PC.

Now just to get it working together, otherwise, I might just have to get rid of this TV and get another large-ish monitor to replace it.
Weird though, because my old PC used the same TV as it's second panel and never overheated just by having the TV connected.
 
been waiting a long time and gave up hope, but yesterday i found that this was in the works over at CyrilCherry. Just posting incase anyone cares, i'm happy

been waiting a long time and gave up hope, but yesterday i found that this was in the works over at CyrilCherry. Just posting incase anyone cares, i'm happy anyway :cheers:

View attachment 1406137
maybe you have a link for this beauty ?
 
Thanks.

Could you be more specific.

What asscoiated files in the data folder?

You mean slickshard_front.lut, etc?

Edit: Changing the inertia really seems to do the trick. I copied ASR 1992 inertia values and that really helped. You are the first one with proper advice. I asked about this many times but no one else suggested this.
Same, I asked many times, I guess people are finally now discovering the root of the problem, which is great. Yeah the ASR cars never flip, so they definitely have something.
 
Sharing a mod? Host it on GTPlanet Downloads. Free, public hosting for files up to 10GB in size.
Back